Abstract:This paper presents an investigation into the effects of particle-size distribution on the critical state behavior of granular materials using discrete element method (DEM) simulations on both spherical and non-spherical particle assemblies. A series of triaxial test DEM simulations examine the influence of particle-size distribution (PSD) and particle shape, which were independently assessed in the analyses presented. Samples were composed of particles with varying shapes characterized by overall regularity (OR) and different PSDs. The samples were subjected to the axial compression through different loading schemes: constant volume, constant mean effective stress, and constant lateral stress. All samples were sheared to large strains to ensure that a critical state was reached. Both the macroscopic and microscopic behaviors in these tests are discussed here within the framework of the anisotropic critical state theory. It is shown that both OR and PSD may affect the response of the granular assemblies in terms of the stress–strain relations, dilatancy, and critical state behaviors. For a given PSD, both the shear strength and fabric norm decrease with an increase in OR . The critical state angle of shearing resistance is highly dependent on particle shape. In terms of PSD, uniformly distributed assemblies mobilize higher shear strength and experience more dilative responses than specimens with a greater variation of particle sizes. The position of the critical state line in the e– p ′ space is also affected by PSD. However, the effects of PSD on critical strength and evolution of fabric are negligible. These findings highlight the importance of particle shape and PSD that should be included in the development of constitutive models for granular materials.

Fabric effect on the angle of repose in granular materials

Quantifying and Modelling Fabric Anisotropy of Granular Soils

Effects of initial fabric anisotropy on mechanical behavior and critical state of granular soil

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Effect of Fabric Anisotropy on Bearing Capacity and Failure Mode of Strip Footing on Sand: an Anisotropic Model Perspective

Micro-Scale Modeling of Anisotropy Effects on Undrained Behavior of Granular Soils

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

The Influence of Particle-Size Distribution on Critical State Behavior of Spherical and Non-Spherical Particle Assemblies

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Memory of fabric anisotropy in the static packing of granular materials

Undrained Anisotropy and Rotational Shear in Granular Soil

A Hypoplastic Model for Granular Soils Incorporating Anisotropic Critical State Theory

Effects of fabric anisotropy on elastic shear modulus of granular soils

Effects of Fabric Anisotropy on the Small-Strain Shear Modulus of Granular Materials

High-cycle Shakedown, Ratcheting and Liquefaction Behavior of Anisotropic Granular Material with Fabric Evolution: Experiments and Constitutive Modelling

Effects of initial fabric anisotropy on the undrained rotational shear responses of granular material using discrete element simulations

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

Effects of particle overall regularity and surface roughness on fabric evolution of granular materials: DEM simulations

Effect of inter-particle friction on 3D accordance of stress, strain, and fabric in granular materials

Modeling of the Particle Abrasion Process and a Discrete Element Method Study of Its Shape Effect

Micromechanism study on the influence of particle deposition angle on mechanical properties of sand