Abstract:Elastocaloric cooling has been identified as a promising alternative to high global warming potential vapor compression cooling. Two key bottlenecks to adoption are the need for bulky/expensive actuators to provide sufficient uniaxial stress and inadequate elastocaloric material fatigue life. This paper defines the physics that govern the performance of axisymmetric flexural bending for use as an emerging low-force and low-fatigue elastocaloric heating and cooling mechanisms and further demonstrates a continuous rotary-driven cooling prototype using polycrystalline Ni50.75Ti48.74. Elastocaloric material performance is determined using infrared thermography during uniaxial-tension and four-point bending thermomechanical testing. A systematic study reveals the effects of strain rate (from 0.001 to 0.025 s−1), maximum strain (from 2 to 8%), and strain mode on the temperature evolution, mechanical response, and coefficient of performance. Four-point bending experiments demonstrate a temperature reduction of up to 11.3 °C, material coefficients of performance between 2.31 and 21.71, and a 6.09- to 7.75-fold reduction in the required actuation force compared to uniaxial tension. The absence of localized macroscopic martensite domains and reduced mechanical dissipation during flexure represent reduced microstructure degradation and improved fatigue life. The rotary-based elastocaloric cooling prototype is shown to provide similar thermomechanical performance with the added benefit of discrete hot and cold zones, continuous cooling, inexpensive rotary actuation, and scalability, which represents a significant advancement for compact, long lifetime, and inexpensive elastocaloric cooling.

Additive manufactured thermoplastic elastomers for low-stress driven elastocaloric cooling

Additively Manufactured High-Performance Elastocaloric Materials with Long Fatigue Life

Low-force elastocaloric refrigeration via bending

Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing

A Heat Driven Elastocaloric Cooling System

Shearo-caloric Effect Enhances Elastocaloric Responses in Polymer Composites for Solid-State Cooling

A compact elastocaloric refrigerator

Energy-Efficient Elastocaloric Cooling by Flexibly and Reversibly Transferring Interface in Magnetic Shape-Memory Alloys

Solid-state cooling by elastocaloric polymer with uniform chain-lengths

Mechanocaloric Effects Characterization of Low-Crystalline Thermoplastic Polyurethanes Fiber

Development Of Elastocaloric Cooling Technology

Reduced dimensions elastocaloric materials: A route towards miniaturized refrigeration

Superelasticity and elastocaloric effect in a textured Ti-Nb-Zr-Ta alloy with narrow stress hysteresis

Elastocaloric Cooling of Additive Manufactured Shape Memory Alloys with Large Latent Heat

Elastocaloric Cooling of Shape Memory Alloys: A Review

Improved Elastocaloric Cooling Performance in Gradient-Structured NiTi Alloy Processed by Localized Laser Surface Annealing

Development of Innovative Thermoplastic Foam Materials Using Two Additive Manufacturing Technologies for Application in Evaporative Cooling Systems

Accelerated Learning and Co-Optimization of Elastocaloric Effect and Stress Hysteresis of Elastocaloric Alloys

A Novel Low-Temperature Extrusion Method for the Fused Filament Fabrication of Fluoroelastomer Compounds

Overcoming Fatigue Through Compression for Advanced Elastocaloric Cooling

Enhanced superelasticity and reversible elastocaloric effect in nano-grained NiTi alloys with low stress hysteresis