Abstract:Abstract Many aircraft are inherently over-actuated with regard to their input variables. This can be particularly advantageous in the context of unmanned aerial vehicles (UAV), where actuator functions can fail in critical situations. In such cases, the redundant actuators can be used to further fulfil the control strategies used and thus increase the operational safety. Within such an active fault-tolerant control system, a fault detection and isolation (FDI) module is required. To evaluate such safety–critical systems, hardware-in-the-loop simulations (HIL) are a necessary step prior to real flight tests. These simulations can verify the correct implementation of the flight controller on the target hardware as well as the real-time capability of the algorithms used. Particularly in the context of active fault-tolerant control, investigations concerning the robustness of the used FDI module with regard to real, noisy sensor signals, which can be generated by a HIL demonstrator, are of utter importance. This paper presents the development of a HIL demonstrator for the validation of fault-tolerant control methods for a hybrid UAV. This includes a detailed description of the demonstrator’s design, control and interfacing between the integrated subsystems. As an application example, a hybrid UAV model will be shortly presented, which, in addition to the primary aerodynamic control surfaces, can also use four lift rotors to control the aircraft during cruise and is therefore inherently over-actuated. Finally, a closed-loop real-time simulation of the UAV model on the HIL demonstrator is presented on the basis of the exemplary simulation of an actuator failure and subsequent reconfiguration by the fault-tolerant flight control law.

Towards Single-Failure-Tolerant Multicopters.

Control reconfiguration design for control surface fault of small unmanned aerial vehicle

Implementation of Constructing High Reliability Multi-rotor Rontroller Based on PX4

A Study on Fault Tolerance Technology of Flight Control Computer for Unmanned Aerial Vehicle

Fault-tolerant Control of an Over-actuated UAV Platform Built on Quadcopters and Passive Hinges

Failsafe Mechanism Design of Multicopters Based on Supervisory Control Theory

Preliminary Safety Assessment for Electro-mechanical Actuation Architectures for Unmanned Aerial Vehicles

Actuator Fault Diagnosis of a Hexacopter: A Nonlinear Analytical Redundancy Approach.

VTOL Failure Detection and Recovery by Utilizing Redundancy

Active Fault Tolerant Flight Control System Design - A UAV Case Study

Framework for incremental development of complex unmanned aircraft systems

Loss of Effectiveness Information Observability Analysis for Multicopters

Development of a hardware-in-the-loop demonstrator for the validation of fault-tolerant control methods for a hybrid UAV

UAV Avionics Safety, Certification, Accidents, Redundancy, Integrity and Reliability: A Comprehensive Review and Future Trends

A Survey on UAV Computing Platforms: A Hardware Reliability Perspective

A Modular Aerial System Based on Homogeneous Quadrotors with Fault-Tolerant Control

Implementation of a Distributed Fault-Tolerant Computer for UAV

Availability of UAV Fleet Evaluation Based on Multi-State System

Deep Learning-Based Robust Actuator Fault Detection and Isolation Scheme for Highly Redundant Multirotor UAVs

Unified Simulation and Test Platform for Control Systems of Unmanned Vehicles

Uniform Passive Fault-Tolerant Control of a Quadcopter With One, Two, or Three Rotor Failure