Abstract:The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes. Particularly, a high-aspect-ratio flexible flying wing is prone to body freedom flutter (BFF), which is a result of coupling of the rigid body short-period mode with 1st wing bending mode. Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law. Instead of using the rigid body mode, this work simulates the rigid body motion of the model by using the six-degree-of-freedom (6DOF) equation. A dynamic mesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed. An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation (CFD/CSD/6DOF)-based BFF prediction method is proposed. Firstly, the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model. Based on this state, the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of the model. Then combined with the variable stiffness method, the critical flutter point of the model is obtained. This method is applied to the BFF calculation of a flying wing model. The calculation results of the BFF characteristics of the model agree well with those from the modal method and Nastran software. Finally, the method is used to analyze the influence factors of BFF. The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center of mass forward or increasing the pitch inertia.

Reduced-Order Modeling And Flutter Suppression Control Of An Experimental Wing

Flutter suppression by active control technology

Reduced-Order Modeling and the Physics Governing Flapping Wing Fluid-Structure Interaction

Flutter active suppression of two-dimensional airfoil based on H∞ controller and μ controller

Modeling, Design, and Flight Testing of Three Flutter Controllers for a Flying-Wing Drone

Experimental Flutter Analysis over Different Selected Wing Planforms by Varying the Wing Cross Section Geometry

Aeroelastic Analysis of Transonic Flutter with CFD-Based Reduced-Order Model

Experimental and Numerical Flutter Analysis Using Local Piston Theory with Viscous Correction

Mechanism of Single-mode Panel Flutter in Low Supersonic Flow

A novel unsteady aerodynamic Reduced-Order Modeling method for transonic aeroelastic optimization

Time-Delayed Feedback Control for Flutter of Supersonic Aircraft Wing

Transonic Wing Flutter Predictions by a Loosely-Coupled Method

Supercritical and subcritical aeroelastic behaviors of a three-dimensional wing coupled with a nonlinear energy sink

MATLAB-Based Flight-Dynamics and Flutter Modeling of a Flexible Flying-Wing Research Drone

A Reduced Order Model for Coupled Mode Cascade Flutter Analysis

Quasi Three-Dimensional Deformable Blade Element and Unsteady Vortex Lattice Reduced-Order Modeling of Fluid-Structure Interaction in Flapping Wings

Flutter performance simulation on streamlined bridge deck with active aerodynamic flaps

Flutter prediction, suppression and control in aircraft composite wings as a design prerequisite: a survey

Efficient multi-fidelity reduced-order modeling for nonlinear flutter prediction

Flutter control optimization for a 5000 m suspension bridge with active aerodynamic flaps: a CFD-enabled strategy

Time-Domain Analysis of Body Freedom Flutter Based on 6DOF Equation