Abstract:In terms of CNC machining task, high feedrate and high accuracy are of great significance. In this paper, an integrated jerk-limited method of minimal time trajectory planning with confined contour error (IJLMTPC) is proposed. Firstly, an optimal control method is utilized to obtain the minimal time feedrate profile. To compensate the contour error, it is added into the optimal control framework as a constraint. Based on the high-order transfer functions of every axis servo model, the contour errors constraint is formulated as the function of tracking errors. However, the optimal control problem (OCP) is difficult to be solved. Hence, the OCP is transformed into two convex subproblems. Since the axial jerk elements are included in the contour error constraint, they are no longer considered as dependent constraints in the two subproblems specially. Afterwards, two subproblems are discretized with control vector parameterization. Consequently, two subproblems are more efficient to be solved with nonlinear programming, and the minimal time feedrate is obtained. Secondly, considering that the OCP is solved on the domain of curve parameter, it is inconvenient for real-time interpolation. The resulting feedrate from solving the OCP is transformed into the corresponding profile on time domain, while the limited tangent jerk is imposed on. Hence, the feedrate is smoothed. Finally, to alleviate the fluctuation of feedrate, the real-time interpolation is performed based on the parameter correction b-spline. Two benchmark tool paths are adopted to test the proposed scheme, and the effectiveness is verified.

Real-Time Generation Of Trapezoidal Velocity Profile For Minimum Energy Consumption And Zero Residual Vibration In Servomotor Systems

Antivibration and Energy Efficiency Design for Large Stroke Additive Manufacturing Based on Dynamic Trajectory Adaption

A Novel Approach Of Tuning Trapezoidal Velocity Profile For Energy Saving In Servomotor Systems

Globally Minimum-Energy-vibration Trajectory Planning for Servomotor Systems with State Constraints

Real-time Generation of a Continuous Acceleration Trajectory for Mobile Robots

High speed feed control algorithm with piecewise linear continuous jounce

Vibration-energy-optimal trajectory planning for flexible servomotor systems with state constraints

Smooth Trajectory Generation for Industrial Machines and Robots Based on High-Order S-curve Profiles

Optimal placement of inherent zeros in polynomial-based motion profiles for minimizing residual vibration and travel time under system uncertainties

Simultaneous Optimization of Actuators' Configuration and Vibration Control in Ultra-Precision Motion Systems with a Time-Varying Performance Location

Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators

Five-axis trajectory generation based on kinematic constraints and optimisation

A Vibration Suppression Method for Flexible Joints Manipulator Based on Trajectory Optimization

Smooth trajectory generation based on contour error constraint and parameter correction b-spline

Minimum time trajectory generation for a novel robotic manipulator

Optimum time-energy-jerk trajectory planning for serial robotic manipulators by reparameterized quintic NURBS curves

Smooth and Time-Optimal S-curve Trajectory Planning for Automated Robots and Machines

Real-time jerk-minimization trajectory planning of robotic arm based on polynomial curve optimization

Integrated optimization of 3D structural topology and actuator configuration for vibration control in ultra-precision motion systems

Optimization of higher-order S-curve motion profile using unitization method aiming to reduce the vibration of a lightly damped system