Abstract:Objective 3D finite element model was used to analyze the influence of the torque preset arch wire on the movement of the anterior teeth.Methods 9°,13°,17°,torque preset arch wire with palatal-only or palatal-buccal combined force loading systems were simulated on the 3D FE model,then the movement tendency of anterior teeth with sliding mechanism was analyzed.Results 1.The 3D finite element model of a torque preset arch wire was established.2.The effects on the movement of the anterior teeth with the increase of torque were as following:With 9° positive torque,the largest movement was in the distal part of lateral incisor,and the distance is 0.194E-3 mm.With 13° positive torque,the largest movement was in the distal part of lateral incisor,and the distance is 0.384E-3 mm.With 17° positive torque,the largest movement was in the distal part of lateral incisor,and the distance is 0.575E-3 mm.3.The effects of different torque combining palatal 1.50N force were that:With 9° positive torque,the largest movement was in the mesial part of canine incisal edge,and the distance is 0.501E-3 mm.With 13° positive torque,the largest movement was in the mesial part of canine incisal edge,and the distance is 0.559E-3 mm.With 17° positive torque,the largest movement was in the mesial part of canine incisal edge,and the distance is 0.628E3 mm.4.Theeffects of different torque combining buccal 1.00N force and palatal 0.50N force were that:With 9°positive torque,the largest movement was in the mesial part of canine cusp,and the distance is 0.340E-3 mm With 13° positive torque,the largest movement was in mesial part of canine cusp,and the distance is 0.499E-3 mm.With 17° positive torque,the largest movement was located in mesial part of canine cusp,and the distance is 0.689E-3 mm.Conclusions The effects on the torque of the anterior teeth by using different torque preset arch wires was different.In order to achieve good torque control,the torque preset arch wire should be used in the stage of space closure by sliding mechanics in lingual appliances.When using the combined forces from palatal and buccal direction,9°-13° positive torque should be used for gaining good incisors torque control.

Orthodontic Force Simulation of Tooth-PDL-Bone Complex under Archwire Loading

A Biomechanical Case Study on the Optimal Orthodontic Force on the Maxillary Canine Tooth Based on Finite Element Analysis.

Modeling and Experimentation of the Unidirectional Orthodontic Force of Second Sequential Loop Orthodontic Archwire

Orthodontic force/torque modeling and experiment of Kitchon root‐controlled auxiliary archwire

Force-Controlled Biomechanical Simulation of Orthodontic Tooth Movement with Torque Archwires Using HOSEA (Hexapod for Orthodontic Simulation, Evaluation and Analysis)

Establishment, FEM Analysis and Experimental Validation of Tooth Movement Prediction Model of Orthodontic Archwire T-loop

Orthodontic Force Prediction Model of T-loop Closing Spring Based on Dynamic Resistance Model

Stress change of periodontal ligament of the anterior teeth by using a torque preadjusted arch wire of lingual appliance: a 3-dimensional finite element analysis

Activation of the classical complement pathway by Fc fragment of human IgA.

Orthodontic System Modeled and Simulated with the Lingual Technique to Assess Tooth Forces

Finite element analysis of tooth movement under different retraction force and intrusive force in double-archwire lingual orthodontics system

A new orthodontic force simulation system with a simulated periodontal ligament to measure the delivered force at the root apex

ORTHODONTIC PROCESS SAFETY EVALUATION BASED ON PERIODONTAL LIGAMENT CAPILLARY PRESSURE AND OGDEN MODEL

[The Three-Dimensional Nonlinear Finite Element Analysis of Force System of the "Rocking-Chair Archwire"].

Mechanical responses of maxillary canine and surrounding tissues under orthodontic loading: a non-linear three-dimensional finite element analysis

THREE DIMENSIONAL MECHANICAL ANALYSIS FOR THE ORTHODONTIC FORCES OF ORTHODONTIC WIRES

Construction and Simulation of Constitutive Model of Periodontal Ligament Based on Hyperelasticity-Viscoelasticity

The torque control of the anterior teeth by using a torque preset arch wire of lingual appliances at the stage of space closure: a 3-dimensional finite element analysis

Biomechanical characterization of the periodontal ligament: Orthodontic tooth movement

Magnetic form factor for itinerant-electron systems.

Novel approach for characterizing clinical load application of superelastic orthodontic wires