Abstract:Most existing stick-slip piezoelectric actuators fail to achieve smooth motion and linear speed, and the backward motion cannot be actively inhibited during motion. This paper develops a novel piezoelectric actuator with stiffness-variable flexible mechanism imitating mantis forefoot, which utilizes the elastic potential energy to suppress backward motion. Furthermore, the contact condition between the driving foot and the rotor can be adjusted through a joint-like flexible structure. On this basis, contact precisely adjusted driving (CPAD) mode and triangular wave cooperative driving (TWCD) mode are proposed to achieve complete suppression of backward motion, as well as high-speed and high-resolution output. The transfer matrix method (TMM) in the cross-section of multiple state nodes has been improved and applied to accurately establish the theoretical model for the complex flexible hinge structure, with the combination of FEM for structural optimization design and mechanical properties analysis. The error between the calculated results and the experimental results is within 4%. Finally, a prototype with dimensions of Ø36 × 10 mm is manufactured and tested. The results show that both driving modes are able to achieve smooth motion output by actively suppressing backward motion, and a linear speed curve can be achieved under 800 Hz. The prototype achieves a maximum speed of 4491.38 mrad/s and a rotational resolution of 0.332 μrad, which is significantly better than existing actuators with similar size. This study shows great value for applications in the field of fast and precise positioning with size constraints.

Design and Experimental Performance of a Piezoelectric Wheelbarrow Applicable to the Stick-Slip Motion Study.

Experiments and Study of a Low-Frequency, High-Speed Bi-Directional Piezoelectric Stick-Slip Actuator

Mechanical Energy Harvesting from Road Pavements under Vehicular Load Using Embedded Piezoelectric Elements

Design and performance evaluation of a stick-slip actuator with Z-shaped beam and two-stage amplification system

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Design, Analysis and Experimental Performance of a Novel Stick-Slip Type Piezoelectric Rotary Actuator Based on Variable Force Couple Driving

Research on A Trans-Scale Inertial Stick-Slip Platform Driven by Piezoelectric Ceramics

Improved Inertial Stick-Slip Movement Performance Via Driving Waveform Optimization

Investigation on Driving Characteristics of a Piezoelectric Stick–slip Actuator Based on Resonant/off-Resonant Hybrid Excitation

Design and Experimental Investigation of a Novel Stick-Slip Piezoelectric Actuator Based on V-shaped Driving Mechanism

Design and performance study of a piezoelectric beam conveyor based on the standing wave principle

Design and Locomotion Study of Stick-Slip Piezoelectric Actuator Using Two-Stage Flexible Hinge Structure

A bipedal cooperative drive method for the stick-slip piezoelectric actuator to achieve smooth motion

A piezoelectric inertial actuator operating with elliptical drive and stick-slip drive modes

A novel traveling wave piezoelectric actuated wheeled robot: design, theoretical analysis, and experimental investigation

Design, analysis and experimental performance of a stepping type piezoelectric linear actuator based on compliant foot driving

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Achieving Smooth Motion for Piezoelectric Stick–Slip Actuator With the Inertial Block Structure

Achieving smooth motion in displacement amplification piezoelectric stick-slip actuator

A dual-mode stick-slip piezoelectric actuator imitating mantis forefoot

Achieving smooth motion of stick–slip piezoelectric actuator by means of alternate stepping