Abstract:We propose and demonstrate accurate 3D real-time indoor localization via broadband nonlinear backscatter in passive devices. The proposed method does not need any relative motion between a reader and a tag or the use of reference anchor nodes. In the conventional radio frequency identification (RFID) system, a passive tag responds to a reader by switching its antenna "on" and "off". The operation of such conventional backscatter is essentially "linear", since the reader-to-tag (downlink) and tag-to-reader (uplink) signals overlap on the same carrier frequency. Although linear backscatter is straightforward, the self-jamming problem caused by strong leakage signals from the transmitter to the receiver is notorious and poses many constraints on the received signal quality, operation bandwidth, modulation flexibility and system complexity. To enable high accuracy real-time 3D indoor localization for passive devices, we show that nonlinear backscatter is more effective than linear backscatter. Nonlinear backscatter exploits nonlinear elements in passive devices to generate second or higher-order harmonics as the uplink response. Separation of downlink and uplink on different carriers allows immediate self-jamming cancellation and direct un-modulated carrier phase decoding, hence resulting in better received signal quality and broad bandwidth of operation, both of which are critical for the localization system. The broad bandwidth allows the design of an efficient phase-based ranging algorithm - heuristic multi-frequency continuous wave (HMFCW) ranging which resolves ambiguous phase cycles with heuristically optimized sparse carrier frequencies. HMFCW ranging can correctly pin down the phase cycle integer with 100% reliability as long as the phase error falls within 90 x BW% (percentage bandwidth). In our present implementation, we achieved a median ranging error below 1 cm under phase error bounds of 50. We realized real-time 3D localization from differential ranging by nonlinear conjugate gradient (CG) search for hyperboloids intersection in a multi-static transceiving system with 1 Tx antenna and 4 Rx antennas. The measured 3D localization median er-ror was 3.5 cm in the indoor environment. Presently, the measurement latency was less than 0.155 seconds. We will present system design, algorithms and a prototype with experimental evaluation.

Poster: Bidimensional Relative Localization Leveraging Interference among Passive Tags.

Less is More: Efficient RFID-Based 3D Localization

A Range-Free Localization of Passive Rfid Tags Using Mobile Readers

Trio: Utilizing Tag Interference for Refined Localization of Passive RFID.

Object Detection and Localization by Passive RF Backscattering System

HMRL: Relative Localization of RFID Tags with Static Devices.

Relative Localization of RFID Tags Using Spatial-Temporal Phase Profiling

Non-blocking tag scanning for passive RFID localization.

STPP: Spatial-Temporal Phase Profiling-Based Method for Relative RFID Tag Localization

3-Dimensional Localization Via RFID Tag Array

Two-dimension localization of passive RFID tags using AOA estimation

Efficient 3-Dimensional Localization for RFID Systems Using Jumping Probe

Item-Level Indoor Localization With Passive UHF RFID Based on Tag Interaction Analysis

Poster: locating RFID tags by rotation.

Phase-based Variant Maximum Likelihood Positioning for Passive UHF-RFID Tags

Real-time code-division multi-tag localization with centimeter accuracy

Timing: Tag Interference Modeling for RFID Localization in Dense Deployment

Relative Positioning of the Inspection Robot Based on RFID Tag Array in Complex GNSS-Denied Environments

Efficient Object Localization Using Sparsely Distributed Passive RFID Tags

3d Real-Time Indoor Localization Via Broadband Nonlinear Backscatter In Passive Devices With Centimeter Precision

A Handheld Fine-Grained RFID Localization System with Complex-Controlled Polarization