Three-Dimensional Interfacial Stress Decoupling Method for Rehabilitation Therapy Robot

Xiaozhou Lu,Weimin Bao,Songlin Wang,Yebo Tao,Jiayi Yang,La Jiang,Jianan Jiang,Xi Li,Xi Xie,Renjie Chen
DOI: https://doi.org/10.1109/tie.2017.2650860
IF: 7.7
2017-01-01
IEEE Transactions on Industrial Electronics
Abstract:Robot-assisted therapy can provide effective rehabilitation training for stroke patients. The interfacial stress between the manipulator and the grasped patient's body is very important for a rehabilitation therapy robot. This paper presents a measurement method, which is able to decouple the measurement of the three-dimensional (3-D) interfacial stress components. To implement the method, interfacial stress sensors were fabricated based on plate capacitance and a superelastic material, while a high-resolution microcapacitance measurement circuit was developed based on a minimal system microprocessor and a programmable controller, and experiments are carried out by using a 3-D stress simulation equipment. The results show that the measurement circuit is capable of measuring a range of 1 fF-30 pF capacitance with a resolution better than 1 fF, and the sensor is capable of measuring Z-direction normal compressive stress at a range of 0-3.0 kgf/cm(2) with a sensitivity of 101 fF/kgf/cm(2) and X-and Y-direction shear stress at a range of 0 - 1.0 kgf/cm(2) with a sensitivity of 118 fF/kgf/cm(2). This method can be applied to rehabilitation therapy robots to decouple the measurement of the 3-D interfacial stress components.
What problem does this paper attempt to address?