Abstract:To improve the torsional buckling resistance and enhance the load-bearing capacity and ductility of H-shaped steel beams with carbon reduction materials, the concept of combining H-shaped steel with bamboo scrimber has been proposed, in which the bamboo scrimber, an eco-friendly, lightweight, and high-strength material, promises significant structural benefits. Five full-scale specimens were designed and tested, including one H-shaped steel, two bamboo scrimber beams, and two composite beams. Additionally, further simulation tests were conducted using the verified finite element model (FEM). The experimental results revealed a remarkable increase in the ultimate bearing capacity of the composite beams by 96.5 % compared to bamboo scrimber-only beams and 72.7 % compared to steel-only beams. Meanwhile, distinct from the brittle fracture characteristics of the bamboo scrimber beams, which include instantaneous crack propagation and interlaminar cracking, the composite beams exhibited localized vertical cracks within the beam's tensile zone, effectively avoiding the torsional buckling issue of the H-shaped steel beam. The results further demonstrated that increasing the cross-sectional size of the composite beams can significantly enhance their flexural stiffness (up to 669 %), and reduce the deflection at the ultimate flexural moment. When the area of the bamboo scrimber in the cross-section was reduced with an unchanged steel profile, the initial stiffness dropped to 79 % without incurring any structural instability. Furthermore, by integrating the experimental and simulation results, a fiber element model for this composite beam structure is proposed to predict the maximum flexural moment value in the ultimate state. A corresponding calculation program was developed, and it is found that the calculated predicted ultimate flexural moment values exhibited negligible deviation from both experimental and FEM results, with AV of 1.0001, AAE of 2.21 %, and COV of 3.28 %.

Mechanical Behavior Of Dowel-Type Joints Made Of Wood Scrimber Composite

Experimental Buckling Performance of Scrimber Composite Columns under Axial Compression

Experimental Investigation into the Mechanical Properties of Scrimber Composite for Structural Applications

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Behavior of Bamboo Scrimber Beam-Column Joints with Bolted Steel Angles and T-Stubs

Production and Mechanical Performance of Scrimber Composite Manufactured from Poplar Wood for Structural Applications

Mechanical Performance of Glulam Beam-to-column Joints with Geometrical Modulus: Experimental Investigation and Analytical Approach

Dowel bearing behavior of bamboo scrimber under different load-to-face grain angle

Flexural mechanical properties of H-shaped steel-bamboo scrimber composite beams

Cyclic Behaviour of Exterior Bamboo Scrimber Beam-to-column Connections

Behaviour of Bamboo Scrimber I-beam-box-column Connections under Static Loads

Static and dynamic mechanical behaviors of bamboo scrimber under combined tension-bending

Experimental investigations on the bearing properties of bamboo scrimber joints by a bolted bamboo-steel-bamboo connection

Mechanical behavior of laminated bamboo–timber composite columns under axial compression

Shear behaviour of I-shaped steel with bamboo scrimber composite beams

Tensile Performance of a Novel Glue-Laminated Cornstalk Scrimber

On Numerical Modeling and Tensile Strength of Bolted Composite Joints

Study On Material And Structural Behaviors Of Engineered Wood Composite Beams

Experimental Study and Analysis on Rotational Behavior of Bamboo Scrimber Beam-to-Column Bolted Connections

Experimental investigation on the dowel-bearing properties of neosinocalamus affinis-based bamboo scrimber

Experimental and numerical investigations on load-carrying capacity of dowel-type bolted bamboo joints