Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

Development of an arcless hybrid DC fault current limiter suitable for DC railway power networks

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Railway DC circuit breaker based on the superconducting fault current limiter

A Novel Bi-directional Hybrid High Voltage DC Fault Current Limiter Based on Superconducting Material and Power Electronic Devices

A novel current-limiting hybrid DC breaker based on thyristors

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

A Hybrid Current-Limiting Circuit for DC Line Fault in Multiterminal VSC-HVDC System.

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Control strategy and experimental verification of hybrid DC circuit breaker

Analysis and Design of the High Current Rising Rate Hybrid DC Current Limiting Circuit Breaker

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

An Improved Hybrid DC Circuit Breaker With Self-Adaptive Fault Current Limiting Capability

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application

An economical hybrid DC circuit breaker with pre-current-limiting capability

Research On A Novel Two-Stage Direct Current Hybrid Circuit Breaker

A novel controllable capacitor commutation based superconducting hybrid direct current breaker

A DC Combined Apparatus for DC 1.5 Kv Rail Transit Traction Systems

New multi-port hybrid DC circuit breaker for DC power grids

Interrupting characteristics of a DC combined apparatus for rail transit systems

Multiport Hybrid DC Circuit Breaker With Reduced Fault Isolation Time and Soft Reclosing Capability