Abstract:Lithium metal batteries are considered to be a leading candidate for next generation batteries due to their higher energy density and potential for safer operation when combined with solid-state electrolyte materials. However, they are still facing different challenges. A key challenge of lithium metal batteries is the volume expansion over cycling due to the non-uniform deposition of lithium on the anode leading to lithium dendrite formation compromising the battery safety, and poor lifetime. Herein, we report the use of porous Lithium Lanthanum Zirconium Oxide (LLZO) anode structures, in which lithium from the cathode is deposited into the pores during initial charging. The goal of this study is to study postmortem the lithium deposition in the porous host after different cycling conditions to measure the 7 Li and 6 Li isotopes depth profile by nuclear reaction analysis (NRA), namely, Proton Induced γ-Ray Emission (PIGE) and by Deuteron Induced Particle Emission (DIPE), respectively. The advantages of using NRA are that it gives an absolute measurement of Lithium without sample reliant calibration, it is a nondestructive technique, highly selective for specific light nuclides such as Lithium, and it is not affected by coordination effect. We demonstrate two different fabrication methods of porous LLZO structures, namely, electrospinning and electrospraying. Then, the fabricated LLZO structures are tested electrochemically using a half cell configuration to examine plating/stripping behavior as a function of current density and to track the overpotential evolution over cycling. Finally, the cycled anodes are investigated using NRA in particular Li concentration inside porous anode, at separator/anode interface and anode/current collector interface. Characterizing the concentration gradient of Li species within the porous and at the various interfaces can help define the current density limitations of solid-state Li metal batteries and identify Li loss failure modes so that cell lifetime can be improved.

The Insights of Lithium Metal Plating/Stripping in Porous Hosts: Progress and Perspectives

Competitive Roles of Conductivity and Lithiophility in Composite Lithium Metal Anode

Evaluation of Porous Lithium Lanthanum Zirconium Oxide (LLZO) Anode Host Structures for Li-Metal Batteries

Strategies in Structure and Electrolyte Design for High‐Performance Lithium Metal Batteries

Advances in carbon-based composite anodes with gradients of lithiophilicity and conductivity used for stable lithium metal batteries

A Review of Composite Lithium Metal Anode for Practical Applications

Recent Development in Lithium Metal Anodes of Liquid-State Rechargeable Batteries

Deep understanding of lithium deposition mechanisms in lithium metal anode porous hosts by combining phase-field simulations with experimental verification

Interfacial challenges towards stable Li metal anode

Recent Advances of Electroplating Additives Enabling Lithium Metal Anodes to Applicable Battery Techniques

Lithium Host:Advanced architecture components for lithium metal anode

Recent advances in lithiophilic materials: material design and prospects for lithium metal anode application

Recent Progress of Porous Materials in Lithium‐Metal Batteries

Perspectives on the development of advanced lithium metal anode

Interface Issues of Lithium Metal Anode for High‐energy Batteries: Challenges, Strategies, and Perspectives

Focus on the Electroplating Chemistry of Li Ions in Nonaqueous Liquid Electrolytes: Toward Stable Lithium Metal Batteries

Enhanced Stability of Lithium Metal Anode by Using a 3D Porous Nickel Substrate

Lithium metal anodes: Present and future

Understanding and modifications on lithium deposition in lithium metal batteries

Plating/Stripping Behavior of Actual Lithium Metal Anode

Polymorph Evolution Mechanisms and Regulation Strategies of Lithium Metal Anode under Multiphysical Fields