Abstract:China’s coal-fired power plants emit over 5.7 billion tons of CO2 annually. To realize the dual carbon goals in time, it is necessary to reduce the carbon emissions of coal-fired power plants. Microalgae carbon fixation can efficiently absorb CO2 through photosynthesis and convert it into biomass, which is a highly promising technology for carbon reduction in coal-fired power plants. Light guide tubes can flexibly change the light distribution in a photobioreactor, while optical fibers can transmit light centrally with low light loss. Therefore, a microalgae photobioreactor with an optical fiber/light guide tube is proposed to expand the light-receiving area of the microalgae suspension, increase the light-harvesting of microalgal cells, and promote carbon fixation via microalgae photosynthesis. The optical simulation software was used to trace the propagation of light in the optical fiber/light guide tube, and the light intensity distribution of the tube wall was obtained. Microalgae cultivation experiments were conducted in various photobioreactors and under different input light energy conditions. The change trends of biomass yield, carbon sequestration rate, and chlorophyll content were obtained, and the impact of built-in optical fiber /light guide tubes on carbon fixation via microalgae was investigated. Results indicated that the light intensity emitted from the optical fiber terminal decreased precipitously from 30 mm to 140 mm along the side of the light guide tube. Additionally, the tube exhibited a concentrated light-emitting range. Adding a conical reflector to reflect the transmitted light at the tube bottom and designing a stepped optical fiber to emit input light from different steps can optimize the light-emitting effect of the light guide tube and make the light distribution in the microalgae photobioreactor more uniform, so that the microalgal cells far away from the light source area can receive the light energy to photosynthesize and fix carbon. At a light input of 3.3 W/L, the minimum light intensity on the side surface of the light guide comprising a two-stage stepped optical fiber and conical reflector was 47 μmol/(m2·s). The average light intensity was 64 μmol/(m2·s), representing a 2.6-fold increase compared to the light guide tube lacking both the optical fiber and any enhancements beyond its top section. After seven days of cultivation, the microalgae concentration in the stepped fiber photobioreactor (SF-PBR) could reach 1.9 g/L, which was 46.2% higher than that of the photobioreactor inserted with flat-end fiber optic light guide (FF-PBR) and 111.1% higher than that of the photobioreactor with only top-fed light (LG-PBR). When the light input was escalated to 5.0 W/L, a high microalgae concentration of 2.8 g/L was achieved at 7 d. Meanwhile, the average carbon sequestration rate of 608.3 mg/(L·d) was obtained, exhibiting 1.9-fold augmentation compared to the control LG-PBR.

Simultaneous Enhancement of Chlorella Vulgaris Growth and Lipid Accumulation Through the Synergy Effect Between Light and Nitrate in a Planar Waveguide Flat-Plate Photobioreactor.

Integrating planar waveguides doped with light scattering nanoparticles into a flat-plate photobioreactor to improve light distribution and microalgae growth.

Enhancing CO2 photo-biochemical conversion in a newly-designed attached photobioreactor characterized by stacked horizontal planar waveguide modules

Boosting Nannochloropsis Oculata Growth and Lipid Accumulation in a Lab-Scale Open Raceway Pond Characterized by Improved Light Distributions Employing Built-in Planar Waveguide Modules

Physiological-phased kinetic characteristics of microalgae Chlorella vulgaris growth and lipid synthesis considering synergistic effects of light, carbon and nutrients.

Application of growth-phase based light-feeding strategies to simultaneously enhance Chlorella vulgaris growth and lipid accumulation.

Promotion of carbon fixation and emission reduction by microalgae with optical fiber/light guide tubes

CO2 capture/biofixation and lipid extraction by membrane contactors for enhancing microalgal cultivation

Optimizing Culture Conditions for Heterotrophic-Assisted Photoautotrophic Biofilm Growth of Chlorella Vulgaris to Simultaneously Improve Microalgae Biomass and Lipid Productivity

A Novel Photobioreactor Generating the Light/Dark Cycle to Improve Microalgae Cultivation

Novel Flat-Plate Photobioreactors for Microalgae Cultivation with Special Mixers to Promote Mixing along the Light Gradient

Enhancing Microalgae Production by Installing Concave Walls in Plate Photobioreactors

A Synchronous Photoautotrophic-Heterotrophic Biofilm Cultivation Mode for Chlorella Vulgaris Biomass and Lipid Simultaneous Accumulation

Sequential heterotrophy–dilution–photoinduction cultivation for efficient microalgal biomass and lipid production

Strengthening flash light effect with a pond-tubular hybrid photobioreactor to improve microalgal biomass yield

A novel photobioreactor generating the light/dark cycle to improve microalgae cultivation.

A Novel Self-Adaptive Microalgae Photobioreactor Using Anion Exchange Membranes for Continuous Supply of Nutrients.

Performance of LED with Mixed Wavelengths or Two-Phase Culture on the Growth and Lipid Accumulation of Chlorella Pyrenoidosa

Assessment of Light Distribution Model for Marine Red Microalga Porphyridium Purpureum for Sustainable Production in Photobioreactor

Phase-Feeding Strategy for Chlorella Vulgaris to Enhance Biomass and Lipid Productivity

Improve growth and lipid accumulation in microalgae with aggregation induced emission-based nanomaterial towards sustainable lipid production in microalgae