Sub–100-nm Metafluorophores with Digitally Tunable Optical Properties Self-Assembled from DNA

Johannes B. Woehrstein,Maximilian T. Strauss,Luvena L. Ong,Bryan Wei,David Y. Zhang,Ralf Jungmann,Peng Yin

DOI: https://doi.org/10.1126/sciadv.1602128

IF: 13.6

2017-01-01

Science Advances

Abstract:Programmable DNA-based metafluorophores allow simultaneous tagging and imaging with more than 100 virtual colors.

What problem does this paper attempt to address?

Colorimetric path tagging of filaments using DNA-based metafluorophores

A.P. Micolich

DOI: https://doi.org/10.48550/arXiv.1909.06024

2019-09-11

Abstract:The idea is a nanoscale extension of a sporting event called a `color run'. The filament is wrapped with a DNA origami `barrel', which acts as the nanoscale equivalent of a white t-shirt. The DNA t-shirt has dangling ss-DNA `handles' that bind `tags' consisting of an `anti-handle' oligo bound to a fluorophore. The tagging methodology exploits the recent development of DNA-based `metafluorophores' with digitally tunable optical properties based on a collection of fluorophores bound to a single DNA origami structure. In this idea, the filament collects different color tags at `color-stations' as it travels through the network. These contribute to a final DNA t-shirt color that represents of the path taken. Readout is implemented through lenseless on-chip imaging via pixels in a CMOS backplane located at read-out points in the network. Color-stations are implemented via microfluidic channels on a dialysis membrane, which feed tags into the network in localised areas. A chemical countermeasure to prevent false tagging by stray tags that have drifted in from other stations by exploiting strand-displacement technique is also proposed.

Soft Condensed Matter,Biological Physics
DNA-Programmed Four-Bit Quaternary Fluorescence Encoding (FLUCO) Enables 51-Colored Bioimaging Analysis

Dongsheng Mao,Xiaochen Tang,Runchi Zhang,Tianshu Chen,Chenbin Liu,Hongquan Gou,Pei Sun,Yichun Mao,Jie Deng,Wenxing Li,Fenyong Sun,Xiaoli Zhu

DOI: https://doi.org/10.1021/jacs.4c00811

IF: 15

2024-06-12

Journal of the American Chemical Society

Abstract:Color encoding plays a crucial role in painting, digital photography, and spectral analysis. Achieving accurate, target-responsive color encoding at the molecular level has the potential to revolutionize scientific research and technological innovation, but significant challenges persist. Here, we propose a multibit DNA self-assembly system based on computer-aided design (CAD) technology, enabling accurate, target-responsive, amplified color encoding at the molecular level, termed fluorescence...

chemistry, multidisciplinary
Encoding Quantized Fluorescence States with Fractal DNA Frameworks

Jiang Li,Jiangbing Dai,Shuoxing Jiang,Mo Xie,Tingting Zhai,Linjie Guo,Shuting Cao,Shu Xing,Zhibei Qu,Yan Zhao,Fei Wang,Yang,Lei Liu,Xiaolei Zuo,Lihua Wang,Hao Yan,Chunhai Fan

DOI: https://doi.org/10.1038/s41467-020-16112-z

IF: 16.6

2020-01-01

Nature Communications

Abstract:Signal amplification in biological systems is achieved by cooperatively recruiting multiple copies of regulatory biomolecules. Nevertheless, the multiplexing capability of artificial fluorescent amplifiers is limited due to the size limit and lack of modularity. Here, we develop Cayley tree-like fractal DNA frameworks to topologically encode the fluorescence states for multiplexed detection of low-abundance targets. Taking advantage of the self-similar topology of Cayley tree, we use only 16 DNA strands to construct n-node (n = 53) structures of up to 5 megadalton. The high level of degeneracy allows encoding 36 colours with 7 nodes by site-specifically anchoring of distinct fluorophores onto a structure. The fractal topology minimises fluorescence crosstalk and allows quantitative decoding of quantized fluorescence states. We demonstrate a spectrum of rigid-yet-flexible super-multiplex structures for encoded fluorescence detection of single-molecule recognition events and multiplexed discrimination of living cells. Thus, the topological engineering approach enriches the toolbox for high-throughput cell imaging.
Monochromatic Fluorescent Barcodes Hierarchically Assembled from Modular DNA Origami Nanorods.

Victor Pan,Wen Wang,Ian Heaven,Tanxi Bai,Yongxin Cheng,Chunlai Chen,Yonggang Ke,Bryan Wei

DOI: https://doi.org/10.1021/acsnano.1c03796

IF: 17.1

2021-01-01

ACS Nano

Abstract:With the rapid advancement of fluorescence microscopy, there is a growing interest in the multiplexed detection and identification of various bioanalytes (e.g., nucleic acids and proteins) for efficient sample processing and analysis. We introduce in this work a simple and robust method to provide combinations for micrometer-scale fluorescent DNA barcodes of hierarchically assembled DNA origami superstructures for multiplexed molecular probing. In addition to optically resolvable dots, we placed fluorescent loci on adjacent origami within the diffraction limit of each other, rendering them as unresolvable bars of measurable lengths. We created a basic set of barcodes and trained a machine learning algorithm to process and identify individual barcodes from raw images with high accuracy. Moreover, we demonstrated that the number of combinations can be increased exponentially by generating longer barcodes, by controlling the number of incorporated fluorophores to create multiple levels of fluorescence intensity, and by employing super-resolution imaging. To showcase the readiness of the barcodes for applications, we used our barcodes to capture and identify target nucleic acid sequences and for simultaneous multiplexed characterization of binding kinetics of several orthogonal complementary nucleic acids.
Tuning Optical Absorption and Emission Using Strongly Coupled Dimers in Programmable DNA Scaffolds.

Stephanie M. Hart,Xiao Wang,Jiajia Guo,Mark Bathe,Gabriela S. Schlau-Cohen

DOI: https://doi.org/10.1021/acs.jpclett.1c03848

IF: 6.888

2022-01-01

The Journal of Physical Chemistry Letters

Abstract:Molecular materials for light harvesting, computing, and fluorescence imaging require nanoscale integration of electronically active subunits. Variation in the optical absorption and emission properties of the subunits has primarily been achieved through modifications to the chemical structure, which is often synthetically challenging. Here, we introduce a facile method for varying optical absorption and emission properties by changing the geometry of a strongly coupled Cy3 dimer on a double-crossover (DX) DNA tile. Leveraging the versatility and programmability of DNA, we tune the length of the complementary strand so that it "pushes" or "pulls" the dimer, inducing dramatic changes in the photophysics including lifetime differences observable at the ensemble and single-molecule level. The separable lifetimes, along with environmental sensitivity also observed in the photophysics, suggest that the Cy3-DX tile constructs could serve as fluorescence probes for multiplexed imaging. More generally, these constructs establish a framework for easily controllable photophysics via geometric changes to coupled chromophores, which could be applied in light-harvesting devices and molecular electronics.
DNA Nanostructure‐encoded Fluorescent Barcodes

Tingting Zhai,Qian Li,Jianlei Shen,Jiang Li,Chunhai Fan

DOI: https://doi.org/10.1002/agt2.8

2020-01-01

Aggregate

Abstract:Abstract Identification and differentiation of various bioanalytes with high spatial and temporal resolution have spawned fluorescent barcode‐based detection and imaging. DNA nanostructures with excellent structure programmability, addressability, and near‐atomic structure accuracy have emerged as a versatile platform to develop fluorescent barcodes through finely controlled dye numbers, relative distances, and compositions. A variety of DNA fluorescent barcodes with distinguishable spectral colors, geometries and digitized fluorescence intensities have been constructed and favorably implemented in the field of bioimaging, multiplex bioassay, and information security. In this review, we first summarize the state of the art of self‐assembled DNA nanostructures. Next, the utilization of DNA nanostructure to develop fluorescent barcodes and the photophysical properties of DNA‐templated fluorophores are reviewed. Finally, the applications of DNA fluorescent barcodes for biosensing and imaging, and the challenges and outlook of DNA nanostructure‐engineered fluorescent barcodes are discussed.
Tunable Fluorescence from Dye‐Modified DNA‐Assembled Plasmonic Nanocube Arrays

Cindy Y. Zheng,Edgar Palacios,Wenjie Zhou,Wisnu Hadibrata,Lin Sun,Ziyin Huang,George C. Schatz,Koray Aydin,Chad A. Mirkin

DOI: https://doi.org/10.1002/adma.201904448

IF: 29.4

2019-01-01

Advanced Materials

Abstract:Colloidal crystal engineering with DNA on template‐confined surfaces is used to prepare arrays of nanocube‐based plasmonic antennas and deliberately place dyes with sub‐nm precision into their hotspots, on the DNA bonds that confine the cubes to the underlying gold substrate. This combined top‐down and bottom‐up approach provides independent control over both the plasmonic gap and photonic lattice modes of the surface‐confined particle assemblies and allows for the tuning of the interactions between the excited dyes and plasmonically active antennas. Furthermore, the gap mode of the antennas can be modified in situ by utilizing the solvent‐dependent structure of the DNA bonds. This is studied by placing two dyes, with different emission wavelengths, under the nanocubes and recording their solvent‐dependent emission. It is shown that dye emission not only depends upon the in‐plane structure of the antennas but also the size of the gap, which is regulated with solvent. Importantly, this approach allows for the systematic understanding of the relationship between nanoscale architecture and plasmonically coupled dye emission, and points toward the use of colloidal crystal engineering with DNA to create stimuli responsive architectures, which can find use in chemical sensing and tunable light sources.
A Fluorogenic Covalent Chromone-Based Intercalator with a Mega-Stokes Shift for Sensing DNA Hybridization

Steve Vincent,Suman Mallick,Guillaume Barnoin,Hoang-Ngoan Le,Alain Burger,Benoît Y. Michel

DOI: https://doi.org/10.3390/chemosensors11030161

2023-02-26

Chemosensors

Abstract:Forced intercalation (FIT) probes have proven to be a reliable, rapid, inexpensive, and accurate method for the detection and visualization of specific nucleic acid sequences. The accommodation of a rationally designed chromone-based fluorogen within a double-stranded DNA structure was investigated by UV–Vis spectrophotometry and steady-state fluorescence spectroscopy under physiological pH conditions. After selective excitation matching with a 350 nm laser, the intrinsically negligible fluorescence of the tethered electroneutral label in a single-stranded context was increased 10-fold upon duplex formation. This fluorescence enhancement was also accompanied by a mega-Stokes shift (~100 nm) that placed the emission in the cyan color range; both features are appreciable for bio-imaging purposes. In sum, its fluorogenic behavior and its marginal impact on the double helix make this dye a prospective tool for selectively sensing sequences of interest with a remarkable ON/OFF contrast.

chemistry, analytical,electrochemistry,instruments & instrumentation
Photo-Ph Dually Modulated Fluorescence Switch Based on Dna Spatial Nanodevice

Huajie Liu,Yucheng Zhou,Yang,Wenxing Wang,Li Qu,Chen,Dongsheng Liu,Deqing Zhang,Daoben Zhu

DOI: https://doi.org/10.1021/jp8020485

2008-01-01

Abstract:In this paper, we describe our strategy on the design, construction, and characterization of a novel molecular device. By integrating a photoregulated fluorescent switch and a DNA-based nanomachine, the distance-dependent FRET process between fluorescein and photochromic moieties can be further modulated by the spatial output of a unique proton-driven DNA manomachine. This device Could be reversibly switched in a reliable manner, and the fluorescence variation behavior, exhibited by this dually modulated fluorescence switch, can also mimic the function of a Boolean logic operation.
Self-quenched fluorophore-DNA labels for super-resolution fluorescence microscopy

Laurell Kessler,Ashwin Balakrishnan,Tanja Menche,Dongni Wang,Yunqing Li,Maximilian Mantel,Marius Glogger,Marina S. Dietz,Mike Heilemann

DOI: https://doi.org/10.1101/2024.03.24.586443

2024-03-27

Abstract:Protein labeling through transient and repetitive hybridization of short, fluorophore-labeled DNA oligonucleotides has become widely applied in various optical super-resolution microscopy methods. The main advantages are multi-target imaging and molecular quantification. A challenge is the high background signal originating from the presence of unbound fluorophore-DNA labels in solution. Here, we report self-quenching of fluorophore dimers conjugated to DNA oligonucleotides as a general concept to reduce the fluorescence background. Upon hybridization, the fluorescence signal of both fluorophores is fully restored. Here, we expand the toolbox of fluorophores suitable for self-quenching and report their spectra and hybridization equilibria. We apply self-quenched fluorophore-DNA labels to stimulated emission depletion (STED) microscopy and single-molecule localization microscopy (SMLM) and report improved imaging performances.

Biophysics
Localization microscopy using noncovalent fluorogen activation by genetically encoded fluorogen-activating proteins.

Qi Yan,Samantha L Schwartz,Suvrajit Maji,Fang Huang,Chris Szent-Gyorgyi,Diane S Lidke,Keith A Lidke,Marcel P Bruchez

DOI: https://doi.org/10.1002/cphc.201300757

IF: 3.52

2014-01-01

ChemPhysChem

Abstract:The noncovalent equilibrium activation of a fluorogenic malachite green dye and its cognate fluorogen-activating protein (FAP) can produce a sparse labeling distribution of densely tagged genetically encoded proteins, enabling single molecule detection and super-resolution imaging in fixed and living cells. These sparse labeling conditions are achieved by control of the dye concentration in the milieu, and do not require any photoswitching or photoactivation. The labeling is achieved by using physiological buffers and cellular media, in which additives and switching buffers are not required to obtain super-resolution images. We evaluate the super-resolution properties and images obtained from a selected FAP clone fused to actin, and show that the photon counts per object are between those typically reported for fluorescent proteins and switching-dye pairs, resulting in 10-30 nm localization precision per object. This labeling strategy complements existing approaches, and may simplify multicolor labeling of cellular structures.
Photoswitch-Based Fluorescence Encoding of Microspheres in a Limited Spectral Window for Multiplexed Detection

Chao Guo,Jingying Zhai,Yifu Wang,Xinfeng Du,Zige Wang,Xiaojiang Xie

DOI: https://doi.org/10.1021/acs.analchem.1c04856

IF: 7.4

2022-01-13

Analytical Chemistry

Abstract:Fluorescence barcoding with multicolor fluorophores is limited by spectral crowding. Herein, we propose a fluorescence encoding method in a single-color channel with photoswitches. The photochromic naphthopyran was used to mediate the fluorescence of polystyrene microspheres through resonance energy transfer. The initial fluorescence intensity (F0) and the fluorescence after UV light activation (F/F0) were combined to generate hundreds of 2-dimensional barcodes. The coding capacity was further expanded with the different chemical kinetics of the photoswitches. The photoswitch-based fluorescence barcodes were applied to simultaneously and selectively detect the DNA sequences of COVID-19 (with related mutations) as a proof-of-concept for real applications. The compatibility with the state-of-the-art fluorescence microscopes and simple encoding and decoding make the method very attractive for multiplexed and high-throughput analyses.

chemistry, analytical
Fluorogenic DNA-PAINT for faster, low-background super-resolution imaging

Kenny K H Chung,Zhao Zhang,Phylicia Kidd,Yongdeng Zhang,Nathan D Williams,Bennett Rollins,Yang Yang,Chenxiang Lin,David Baddeley,Joerg Bewersdorf

DOI: https://doi.org/10.1038/s41592-022-01464-9

Abstract:DNA-based points accumulation for imaging in nanoscale topography (DNA-PAINT) is a powerful super-resolution microscopy method that can acquire high-fidelity images at nanometer resolution. It suffers, however, from high background and slow imaging speed, both of which can be attributed to the presence of unbound fluorophores in solution. Here we present two-color fluorogenic DNA-PAINT, which uses improved imager probe and docking strand designs to solve these problems. These self-quenching single-stranded DNA probes are conjugated with a fluorophore and quencher at the terminals, which permits an increase in fluorescence by up to 57-fold upon binding and unquenching. In addition, the engineering of base pair mismatches between the fluorogenic imager probes and docking strands allowed us to achieve both high fluorogenicity and the fast binding kinetics required for fast imaging. We demonstrate a 26-fold increase in imaging speed over regular DNA-PAINT and show that our new implementation enables three-dimensional super-resolution DNA-PAINT imaging without optical sectioning.
Programming Nanophotonic Materials with DNA

Etienne Boulais,Wei Sun,Nicolas Sawaya,Yera Hakobyan,Weili Wang,Amy Guan,Keyao Pan,Alan Aspuru-Guzik,Peng Yin,Mark Bathe

DOI: https://doi.org/10.1016/j.bpj.2014.11.3295

IF: 3.4

2015-01-01

Biophysical Journal

Abstract:DNA is a unique nanoscale material that enables the design and synthesis of nanoscale structures of prescribed shape and functionality via programmable self-assembly. Angstrom-level control over the location and orientation of programmed Watson-Crick basepairs offers the ability to scaffold and spatially organize optically active materials to yield novel optical and photonic properties. Here, we present two distinct strategies for designing and synthesizing DNA-based photonic materials, and emphasize the roles of computational modeling in this process. First, we use computational modeling to design mechanically stiff nanoscale DNA "molds" that have user-specified three-dimensional cavity with a nucleating gold seed, which grows in solution to fill and replicate the cavity. We demonstrate the capability of producing nanoparticles of various shapes and materials that exhibit plasmonic properties that are consistent with electromagnetism simulations. In silico design of stiff molds of nearly arbitrary geometric cavities with resulting optical properties that are prescribed a priori enable a property-by-design framework for producing inorganic particles with prescribed functional properties. Second, we use DNA to program the scaffolding of chromophores into complex three-dimensional assemblies, enabling controlled energy transfer at the nanoscale. This strategy is inspired by nature, where cells use organized assemblies of chromophores to capture photons and funnel the resulting excitons toward the reaction center where they are converted to chemical energy. In particular, the close-packing of chromophores results in the emergence of quantum coherence that can strongly affect exciton transport across the structure. Using Förster energy transfer modeling, as well as a hybrid molecular dynamics and quantum mechanical approach, we demonstrate how emergent excitonic and light-harvesting properties of diverse DNA-dye assemblies can be elucidated.
Design of Metal-Organic Framework-Based Nanoprobes for Multicolor Detection of DNA Targets with Improved Sensitivity.

Shuai Wu,Chao Li,Hai Shi,Yue Huang,Genxi Li

DOI: https://doi.org/10.1021/acs.analchem.8b02127

IF: 7.4

2018-01-01

Analytical Chemistry

Abstract:Metal-organic frameworks (MOFs) receive more and more interest in the field of analytical chemistry for their diverse structures and multifunctionality. In this study, we have designed and fabricated nanoscale MOF-based nanoprobes for multicolor detection of DNA targets with improved sensitivity. To do so, MOF-based nanoprobes, constructed by using porous MOFs as a scaffold to load signal dyes and a DNA hairpin structure as capping shell, have been prepared. Once the target has been introduced, a competitive displacement reaction triggers the release of fluorophores from the MOFs' pores. Consequently, a significantly enhanced fluorescence signal can be observed owing to the high loading capacity of MOFs. Therefore, the stimuli-responsive nanoprobes can enable sensitive detection of DNA targets with a low detection limit of 20 fM and selective identification to discriminate single-base mismatch. Moreover, the MOFs can encapsulate different fluorophores with different DNA gatekeepers designed according to the sequence of the target DNA, resulting in more kinds of stimuli-responsive nanoprobes for multiplexed DNA analysis in the same solution. Furthermore, these smart nanoprobes reported in this paper may provide a unique MOF-based tool for detection of various targets via stimuli-responsive systems in the future to widen the applications of MOFs.
DNA photonic nanowires with tunable FRET signals on the basis of toehold-mediated DNA strand displacement reactions.

Bei Wang,Xiaojing Wang,Bing Wei,Fujian Huang,Dongbao Yao,Haojun Liang

DOI: https://doi.org/10.1039/c7nr00386b

IF: 6.7

2017-01-01

Nanoscale

Abstract:A DNA photonic nanowire with tunable FRET signals was fabricated on the basis of cascaded toehold-mediated DNA strand displacement reactions. Different DNA inputs were added to trigger the reaction network, and the corresponding FRET signals were obtained. Compared to the direct hybridization, this design is sensitive for 2 nM targets within 20 min and also causes color changes of the solution with blue-light excitation. It could also be applied in live cells to monitor MicroRNA with a simple modification which might become a low-cost method for further application in the future.
Quantum-dot-tagged Microbeads for Multiplexed Optical Coding of Biomolecules.

Mingyong Han,Xiaohu Gao,Jack Z. Su,Shuming Nie

DOI: https://doi.org/10.1038/90228

IF: 46.9

2001-01-01

Nature Biotechnology

Abstract:Multicolor optical coding for biological assays has been achieved by embedding different-sized quantum dots (zinc sulfide–capped cadmium selenide nanocrystals) into polymeric microbeads at precisely controlled ratios. Their novel optical properties (e.g., size-tunable emission and simultaneous excitation) render these highly luminescent quantum dots (QDs) ideal fluorophores for wavelength-and-intensity multiplexing. The use of 10 intensity levels and 6 colors could theoretically code one million nucleic acid or protein sequences. Imaging and spectroscopic measurements indicate that the QD-tagged beads are highly uniform and reproducible, yielding bead identification accuracies as high as 99.99% under favorable conditions. DNA hybridization studies demonstrate that the coding and target signals can be simultaneously read at the single-bead level. This spectral coding technology is expected to open new opportunities in gene expression studies, high-throughput screening, and medical diagnostics.
Encoding Fluorescence Anisotropic Barcodes with DNA Frameworks

Qiuling Huang,Bin Chen,Jianlei Shen,Lei Liu,Jiajun Li,Jiye Shi,Qian Li,Xiaolei Zuo,Lihua Wang,Chunhai Fan,Jiang Li

DOI: https://doi.org/10.1021/jacs.1c04942

IF: 15

2021-07-09

Journal of the American Chemical Society

Abstract:Fluorescence anisotropy (FA) holds great potential for multiplexed analysis and imaging of biomolecules since it can effectively discriminate fluorophores with overlapping emission spectra. Nevertheless, its susceptibility to environmental variation hampers its widespread applications in biology and biotechnology. In this study, we design FA DNA frameworks (FAFs) by scaffolding fluorophores in a fluorescent protein-like microenvironment. We find that the FA stability of the fluorophores is remarkably improved due to the sequestration effects of FAFs. The FA level of the fluorophores can be finely tuned when placed at different locations on an FAF, analogous to spectral shifts of protein-bound fluorophores. The high programmability of FAFs further enables the design of a spectrum of encoded FA barcodes for multiplexed sensing of nucleic acids and multiplexed labeling of live cells. This FAF system thus establishes a new paradigm for designing multiplexing FA probes for cellular imaging and other biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.1c04942?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.1c04942</a>.Materials and Methods; Tables S1–5; Figures S1–8 (<a class="ext-link" href="/doi/suppl/10.1021/jacs.1c04942/suppl_file/ja1c04942_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary
Single-molecule fluorescence multiplexing by multi-parameter spectroscopic detection of nanostructured FRET labels

Jiachong Chu,Ayesha Ejaz,Kyle M. Lin,Madeline R. Joseph,Aria E. Coraor,D. Allan Drummond,Allison H. Squires

DOI: https://doi.org/10.1038/s41565-024-01672-8

IF: 38.3

2024-05-15

Nature Nanotechnology

Abstract:Multiplexed, real-time fluorescence detection at the single-molecule level can reveal the stoichiometry, dynamics and interactions of multiple molecular species in mixtures and other complex samples. However, fluorescence-based sensing is typically limited to the detection of just 3–4 colours at a time due to low signal-to-noise ratio, high spectral overlap and the need to maintain the chemical compatibility of dyes. Here we engineered a palette of several dozen composite fluorescent labels, called FRETfluors, for multiplexed spectroscopic measurements at the single-molecule level. FRETfluors are compact nanostructures constructed from three chemical components (DNA, Cy3 and Cy5) with tunable spectroscopic properties due to variations in geometry, fluorophore attachment chemistry and DNA sequence. We demonstrate FRETfluor labelling and detection for low-concentration (<100 fM) mixtures of mRNA, dsDNA and proteins using an anti-Brownian electrokinetic trap. In addition to identifying the unique spectroscopic signature of each FRETfluor, this trap differentiates FRETfluors attached to a target from unbound FRETfluors, enabling wash-free sensing. Although usually considered an undesirable complication of fluorescence, here the inherent sensitivity of fluorophores to the local physicochemical environment provides a new design axis complementary to changing the FRET efficiency. As a result, the number of distinguishable FRETfluor labels can be combinatorically increased while chemical compatibility is maintained, expanding prospects for spectroscopic multiplexing at the single-molecule level using a minimal set of chemical building blocks.

materials science, multidisciplinary,nanoscience & nanotechnology
DNA Nanoflowers for Multiplexed Cellular Imaging and Traceable Targeted Drug Delivery

Rong Hu,Xiaobing Zhang,Zilong Zhao,Guizhi Zhu,Tao Chen,Ting Fu,Weihong Tan

DOI: https://doi.org/10.1002/anie.201400323

2014-01-01

Angewandte Chemie

Abstract:We present a facile approach to make aptamer-conjugated FRET (fluorescent resonance energy transfer) nanoflowers (NFs) through rolling circle replication for multiplexed cellular imaging and traceable targeted drug delivery. The NFs can exhibit multi-fluorescence emissions by a single-wavelength excitation as a result of the DNA matrix covalently incorporated with three dye molecules able to perform FRET. Compared with the conventional DNA nanostructure assembly, NF assembly is independent of template sequences, avoiding the otherwise complicated design of DNA building blocks assembled into nanostructures by base-pairing. The NFs were uniform and exhibited high fluorescence intensity and excellent photostability. Combined with the ability of traceable targeted drug delivery, these colorful DNA NFs provide a novel system for applications in multiplex fluorescent cellular imaging, effective screening of drugs, and therapeutic protocol development.

Sub–100-nm Metafluorophores with Digitally Tunable Optical Properties Self-Assembled from DNA

Colorimetric path tagging of filaments using DNA-based metafluorophores

DNA-Programmed Four-Bit Quaternary Fluorescence Encoding (FLUCO) Enables 51-Colored Bioimaging Analysis

Encoding Quantized Fluorescence States with Fractal DNA Frameworks

Monochromatic Fluorescent Barcodes Hierarchically Assembled from Modular DNA Origami Nanorods.

Tuning Optical Absorption and Emission Using Strongly Coupled Dimers in Programmable DNA Scaffolds.

DNA Nanostructure‐encoded Fluorescent Barcodes

Tunable Fluorescence from Dye‐Modified DNA‐Assembled Plasmonic Nanocube Arrays

A Fluorogenic Covalent Chromone-Based Intercalator with a Mega-Stokes Shift for Sensing DNA Hybridization

Photo-Ph Dually Modulated Fluorescence Switch Based on Dna Spatial Nanodevice

Self-quenched fluorophore-DNA labels for super-resolution fluorescence microscopy

Localization microscopy using noncovalent fluorogen activation by genetically encoded fluorogen-activating proteins.

Photoswitch-Based Fluorescence Encoding of Microspheres in a Limited Spectral Window for Multiplexed Detection

Fluorogenic DNA-PAINT for faster, low-background super-resolution imaging

Programming Nanophotonic Materials with DNA

Design of Metal-Organic Framework-Based Nanoprobes for Multicolor Detection of DNA Targets with Improved Sensitivity.

DNA photonic nanowires with tunable FRET signals on the basis of toehold-mediated DNA strand displacement reactions.

Quantum-dot-tagged Microbeads for Multiplexed Optical Coding of Biomolecules.

Encoding Fluorescence Anisotropic Barcodes with DNA Frameworks

Single-molecule fluorescence multiplexing by multi-parameter spectroscopic detection of nanostructured FRET labels

DNA Nanoflowers for Multiplexed Cellular Imaging and Traceable Targeted Drug Delivery