Hemin/Au Nanorods/self-Doped TiO2 Nanowires As a Novel Photoelectrochemical Bioanalysis Platform.

Zhen Wang,Min Cao,Lei Yang,Donghua Liu,Dacheng Wei

DOI: https://doi.org/10.1039/c7an00783c

2017-01-01

Abstract:A sensitive photoelectrochemical platform for GSH was developed by modifying self-doped TiO2nanowires with mixed Au nanorods at two different aspect ratios as the core sensing unit and hemin for recognition.

What problem does this paper attempt to address?

Photoelectrochemical Detection of Glutathione by IrO2-hemin-TiO2 Nanowire Arrays.

Jing Tang,Biao Kong,Yongcheng Wang,Ming Xu,Yanli Wang,Hao Wu,Gengfeng Zheng

DOI: https://doi.org/10.1021/nl4028507

IF: 10.8

2013-01-01

Nano Letters

Abstract:We have developed sensitive detection of glutathione using the IrO2-hemin-TiO2 nanowire arrays. Single-crystalline TiO2 nanowires are synthesized by a hydrothermal reaction, followed by surface functionalization of ~3 nm thick hemin and ~1-2 nm diameter IrO2 nanoparticles. The IrO2-hemin-TiO2 nanowire arrays offer much enhanced photocurrent with ∼100% increase compared to the pristine TiO2 nanowires and allow for label-free, real-time, sensitive photoelectrochemical detection of glutathione. The sensitivity achieved is ~10 nM in buffer, comparable to or better than most of the existing glutathione detection methods. Furthermore, cell extracts containing glutathione are robustly detected, with ~8000 cells/mL for HeLa cells and ~5000 cells/mL for human embryonic kidney 293T cells. This nanowire PEC sensor assay exhibits excellent selectivity and stability, suggesting a potential detection platform for analyzing the glutathione level in biosamples.
Solar‐Energy‐Driven Photoelectrochemical Biosensing Using TiO 2 Nanowires

Jing Tang,Jun Li,Peimei Da,Yongcheng Wang,Gengfeng Zheng

DOI: https://doi.org/10.1002/chem.201406643

2015-01-01

Chemistry

Abstract:Photoelectrochemical sensing represents a unique means for chemical and biological detection, with foci of optimizing semiconductor composition and electronic structures, surface functionalization layers, and chemical detection methods. Here, we have briefly discussed our recent developments of TiO 2 nanowire‐based photoelectrochemical sensing, with particular emphasis on three main detection mechanisms and corresponding examples. We have also demonstrated the use of the photoelectrochemical sensing of real‐time molecular reaction kinetic measurements, as well as direct interfacing of living cells and probing of cellular functions.
Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

jing tang,yongcheng wang,jun li,peimei da,jing geng,gengfeng zheng

DOI: https://doi.org/10.1039/c3ta14173j

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Photoelectrochemical detection represents a unique signal transducing modality, where the photogenerated charge carriers are modulated by the redox reactions of molecular targets over the electrode surface. In this work, we report a novel glucose sensor based on hydrothermally-grown, single-crystalline TiO2 nanowires with surface-functionalized glucose oxidase (GOx), which can oxidize glucose to gluconic acid. The key feature of this glucose sensor design is that the photogenerated holes over the TiO2 anode are utilized to form O-2, which directly serves as an efficient electron shuttling mediator between the enzymatic redox center of GOx and the sensor surface, thus leading to an increase of the photocurrent. As a proof-of-concept, the GOx-functionalized TiO2 (TiO2-GOx) nanowires exhibit a high sensitivity of similar to 0.9 nM in the detection of glucose in buffer. The capability of detecting glucose in mouse serum is also demonstrated. Our work suggests the potential of developing these nanowire-based photoelectrochemical biosensors for convenient, efficient and low-cost biomarker detection and disease diagnosis.
Solar-driven photoelectrochemical probing of nanodot/nanowire/cell interface.

Jing Tang,Yueyu Zhang,Biao Kong,Yongcheng Wang,Peimei Da,Jun Li,Ahmed A Elzatahry,Dongyuan Zhao,Xingao Gong,Gengfeng Zheng

DOI: https://doi.org/10.1021/nl500608w

IF: 10.8

2014-01-01

Nano Letters

Abstract:We report a nitrogen-doped carbon nanodot (N-Cdot)/TiO2 nanowire photoanode for solar-driven, real-time, and sensitive photoelectrochemical probing of the cellular generation of H2S, an important endogenous gasotransmitter based on a tunable interfacial charge carrier transfer mechanism. Synthesized by a microwave-assisted solvothermal method and subsequent surface chemical conjugation, the obtained N-Cdot/TiO2 nanowire photoanode shows much. enhanced photoelectrochemical photocurrent compared with pristine TiO2 nanowires. This photocurrent increase is attributed to the injection of photogenerated electrons from N-Cdots to TiO2 nanowires, confirmed by density functional theory simulation. In addition, the charge transfer efficiency is quenched by Cu2+, whereas the introduction of H2S or S2- ions resets the charge transfer and subsequently the photocurrent, thus leading to sensitive photoelectrochemical recording of the H2S level in buffer and cellular environments. Moreover, this N-Cdot-TiO2 nanowire photoanode has been demonstrated for direct growth and interfacing of H9c2 cardiac myoblasts, with the capability of interrogating H2S cellular generation pathways by vascular endothelial growth factor stimulation as well as inhibition.
WO3 Nanoparticles Decorated Core-Shell TiC-C Nanofiber Arrays for High Sensitive and Non-Enzymatic Photoelectrochemical Biosensing.

Xuming Zhang,Kaifu Huo,Xiang Peng,Ruizhen Xu,Penghui Li,Rongsheng Chen,Gang Zheng,Zhengwei Wu,Paul K. Chu

DOI: https://doi.org/10.1039/c3cc42583e

IF: 4.9

2013-01-01

Chemical Communications

Abstract:A photoelectrochemical biosensing platform based on a WO3 decorated highly conductive TiC-C NF electrode is fabricated and boasts a low detection limit of 1.12 × 10(-8) M (S/N = 3) and high sensitivity for glucose detection at a visible light irradiation density of 50 mW cm(-2).
In Situ Generation of Electron Acceptor for Photoelectrochemical Biosensing Via Hemin-Mediated Catalytic Reaction

Yang Zang,Jianping Lei,Lei Zhang,Huangxian Ju

DOI: https://doi.org/10.1021/ac503741x

IF: 7.4

2014-01-01

Analytical Chemistry

Abstract:A novel photoelectrochemical sensing strategy is designed for DNA detection on the basis of in situ generation of an electron acceptor via the catalytic reaction of hemin toward H2O2. The photoelectrochemical platform was established by sequential assembly of near-infrared CdTe quantum dots, capture DNA, and a hemin-labeled DNA probe to form a triple-helix molecular beacon (THMB) structure on an indium tin oxide electrode. According to the highly catalytic capacity of hemin toward H2O2, a photoelectrochemical mechanism was then proposed, in which the electron acceptor of O2 was in situ-generated on the electrode surface, leading to the enhancement of the photocurrent response. The utilization of CdTe QDs can extend the absorption edge to the near-infrared band, resulting in an increase in the light-to-electricity efficiency. After introducing target DNA, the THMB structure is disassembled and releases hemin and, thus, quenches the photocurrent. Under optimized conditions, this biosensor shows high sensitivity with a linear range from 1 to 1000 pM and detection limit of 0.8 pM. Moreover, it exhibits good performance of excellent selectivity, high stability, and acceptable fabrication reproducibility. This present strategy opens an alternative avenue for photoelectrochemical signal transduction and expands the applications of hemin-based materials in photoelectrochemical biosensing and clinical diagnosis.
Low-potential photoelectrochemical biosensing using porphyrin-functionalized TiO₂ nanoparticles.

Wenwen Tu,Yitong Dong,Jianping Lei,Huangxian Ju

DOI: https://doi.org/10.1021/ac102070f

IF: 7.4

2010-01-01

Analytical Chemistry

Abstract:A novel photoelectrochemical biosensing platform for the detection of biomolecules at relatively low applied potentials was constructed using porphyrin-functionalized TiO2 nanoparticles. The functional TiO2 nanoparticles were prepared by dentate binding of TiO2 with sulfonic groups of water-soluble [meso-tetrakis(4-sulfonatophenyl)porphyrin] iron(III) monochloride (FeTPPS) and characterized by transmission electron microscopy; contact angle measurement; and Raman, X-ray photoelectron, and ultraviolet-visible absorption spectroscopies. The functional nanoparticles showed good dispersion in water and on indium tin oxide (ITO) surface. The resulting FeTPPS-TiO2-modified ITO electrode showed a photocurrent response at +0.2 V to a light excitation at 380 nm, which could be further sensitized through an oxidation process of biomolecules by the hole-injected FeTPPS. Using glutathione as a model, a methodology for sensitive photoelectrochemical biosensing at low potential was thus developed. Under optimal conditions, the proposed photoelectrochemical method could detect glutathione ranging from 0.05 to 2.4 mmol L-1 with a detection limit of 0.03 mmol L-1 at a signal-to-noise ratio of 3. The photoelectrochemical biosensor had an excellent specificity against anticancer drugs and could be successfully applied to the detection of reduced glutathione in gluthion injection, showing a promising application in photoelectrochemical biosensing.
A photoelectrochemical sensor for glutathione based on Bi 2 S 3 -modified TiO 2 nanotube arrays

Mengyan Wang,Yi Zhan,Hanxiao Wang,Chi Zhang,Gaiping Li,Lina Zou

DOI: https://doi.org/10.1039/d1nj06045g

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:A novel photoelectrochemical sensor for the determination of glutathione based on Bi 2 S 3 -modified TiO 2 nanotube arrays. Under the excitation of visible light, glutathione can be oxidized by the holes created by the Bi 2 S 3 /TiO 2 NTAs.

chemistry, multidisciplinary
Platinum and Iridium Oxide Co-modified TiO2 Nanotubes Array Based Photoelectrochemical Sensors for Glutathione

Jing Tian,Peng Zhao,Shasha Zhang,Guona Huo,Zhaochen Suo,Zhao Yue,Shoumin Zhang,Weiping Huang,Baolin Zhu

DOI: https://doi.org/10.3390/nano10030522

IF: 5.3

2020-01-01

Nanomaterials

Abstract:Oriented TiO2 nanotubes, which are fabricated by anodic oxidation method, are prospective in photoelectrochemical analysis and sensors. In this work, Pt and IrO2 co-modified TiO2 nanotubes array was prepared via a two-step deposition process involving the photoreductive deposition of Pt and chemical deposition of IrO2 on the oriented TiO2 nanotubes. Due to the improved separation of photo-generated electrons and holes, Pt-IrO2 co-modified TiO2 nanotubes presented significantly higher PEC activity than pure TiO2 nanotubes or mono-modified TiO2 nanotubes. The PEC sensitivity of Pt-IrO2 co-modified TiO2 nanotubes for glutathione was also monitored and good sensitivity was observed.
Hemin Modified TiO2 Nanoparticles with Enhanced Photoelectrocatalytic Activity for Electrochemical and Photoelectrochemical Sensing

Yuhan Zhu,Kai Yan,Zuwei Xu,Jingdong Zhang

DOI: https://doi.org/10.1149/2.1291609jes

IF: 3.9

2016-01-01

Journal of The Electrochemical Society

Abstract:Hemin-functionalized TiO2 nanoparticles were prepared and assembled on glassy carbon electrode through the electrostatic attraction between positively charged poly(diallyldimethylammonium chloride) and negatively charged hemin and TiO2. The scanning electron microscopy and X-ray diffraction characterization showed that the assembled hemin-TiO2 film displayed a mesoporous structure comprising plenty of TiO2 nanoparticles in rutile phase. The Fourier transform infrared spectra and UV-visible diffuse reflectance spectra indicated that hemin was successfully incorporated into TiO2 film and significantly enhanced the absorption of TiO2 film to visible light. The hemin-TiO2 film exhibited a pair of well-defined redox peaks of hemin by cyclic voltammetry, which could effectively catalyze the electroreduction of H2O2. Thus, the hemin-TiO2 modified electrode was employed as an electrochemical sensor for H2O2 determination, showing a sensitive response linearly proportional to the concentration of H2O2 from 3.0 x 10(-7) to 4.7 x 10(-4) mol.L-1. At the same time, the photoelectrocatalytic activity of TiO2 under visible light illumination was dramatically promoted by hemin. The hemin-TiO2 modified electrode produced a photoelectrochemical response linearly proportional to hydroquinone in the concentration range from 4.0 x 10(-7) to 3.0 x 10(-5) mol.L-1. (C) The Author(s) 2016. Published by ECS. All rights reserved.
High‐Performance Triphase Bio‐Photoelectrochemical Assay System Based on Superhydrophobic Substrate‐Supported TiO2 Nanowire Arrays

Liping Chen,Xia Sheng,Dandan Wang,Jie Liu,Ruize Sun,Lei Jiang,Xinjian Feng

DOI: https://doi.org/10.1002/adfm.201801483

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:The design and fabrication of bio‐photoelectrodes that simultaneously possess rapid charge and gas‐phase mass transport abilities are highly desirable for the development of high‐performance bio‐photoelectrochemical assay systems. Here, a solid–liquid–air triphase bio‐photoelectrode is demonstrated by immobilizing glucose oxidase, a model redox active enzyme, onto 1D single crystalline TiO2 nanowire arrays grown upon a superhydrophobic carbon textile substrate. Based on this triphase bio‐photoelectrode system, oxygen can be directly and constantly supplied from the air phase to sustain enzymatic reactions, leading to much enhanced oxidase kinetics. Further, the photogenerated electrons can transport rapidly and be efficiently collected along the nanowire arrays. The bio‐photoelectrochemical assay system demonstrates a significant wide detection range, high sensitivity, and selectivity as well as a low detection limit. The design principle is generally applicable to the fabrication of other triphase bio‐photoelectrodes, which offers an excellent opportunity for significant advances in environmental analysis and clinical diagnosis.
Anatase TiO2 Nanoparticle–graphene Nanocomposites: One-step Preparation and Their Enhanced Direct Electrochemistry of Hemoglobin

Qingming Shen,Shiwei Zhou,Xiaomei Zhao,Li-Ping Jiang,Wenhua Hou,Jun-Jie Zhu

DOI: https://doi.org/10.1039/c2ay05781f

IF: 3.1

2012-01-01

Analytical Methods

Abstract:Anatase TiO2 nanoparticle-graphene nanocomposites with enhanced direct electrochemistry of hemoglobin and biosensing for H2O2 were synthesized via a facile, one-step approach in aqueous solution at room temperature.
High Performance Hydrogenated TiO2 Nanorod Arrays As a Photoelectrochemical Sensor for Organic Compounds under Visible Light

Shengsen Zhang,Shanqing Zhang,Biyu Peng,Hongjuan Wang,Hao Yu,Haihui Wang,Feng Peng

DOI: https://doi.org/10.1016/j.elecom.2013.12.013

IF: 5.443

2013-01-01

Electrochemistry Communications

Abstract:A photo-electrode of hydrogenated TiO2 nanorod arrays (H-TNRs) was prepared and used as a photoelectrochemical sensor for organic compound detections for the first time. Under visible light, the H-TNR electrode has shown a highly sensitive and steady photocurrent response due to introduction of oxygen vacancy and mid-gap energy levels. The H-TNRs are a promising material for photoelectrochemical detection of organic compounds under visible light.
Photoelectrochemical enzymatic sensor for glucose based on Au@C/TiO<sub>2</sub> nanorod arrays

Lianyuan Ge,Rui Hou,Yang Cao,Jinchun Tu,Qiang Wu

DOI: https://doi.org/10.1039/d0ra08920f

IF: 4.036

2020-01-01

RSC Advances

Abstract:In this work, a photoelectrochemical (PEC) glucose biosensor was synthesized on the basis of a type of Au@C/TiO2 composite by using an unsophisticated secondary hydrothermal strategy.
Self-powered photoelectrochemical biosensing platform based on Au NPs@ZnO nanorods array

Zhuo Kang,Xiaoqin Yan,Yunfei Wang,Yanguang Zhao,Zhiming Bai,Yichong Liu,Kun Zhao,Shiyao Cao,Yue Zhang

DOI: https://doi.org/10.1007/s12274-015-0913-9

IF: 9.9

2015-11-18

Nano Research

Abstract:Photoanodes, which are used in photoelectrochemical (PEC) water splitting, have been shown to be applicable in the construction of a PEC biosensing platform. This was realized by replacing water oxidization with oxidation of an appropriate test molecule. Here, we have demonstrated the feasibility of adopting photoanodes consisting of zinc oxide nanorods arrays decorated with plasmonic gold nanoparticles (Au NPs@ZnO NRs) for the self-powered PEC bioanalysis of glutathione (GSH) in phosphate-buffered saline (PBS) at an applied bias potential of 0 V vs. Ag/AgCl. This heterostructure exhibited enhanced PEC properties because of the introduction of the Au/ZnO interface. Under visible light illumination, hot electrons from surface-plasmon resonance (SPR) at the Au NP surface were injected into the adjacent ZnO and subsequently driven to the photocathode. Under ultraviolet (UV) light illumination, the photogenerated electrons in ZnO tended to transfer to the fluorine-doped tin oxide due to the step-wise energy band structure and the upward energy band bending at the ZnO/ electrolyte interface. These results indicate that plasmonic metal/semiconductor heterostructure photoanodes have great potential for self-powered PEC bioanalysis applications and extended field of other photovoltaic beacons.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
3D Hollow-out TiO2 Nanowire Cluster/gox As an Ultrasensitive Photoelectrochemical Glucose Biosensor.

Wenke Yang,Xiaohong Wang,Wanjun Hao,Qiang Wu,Juan Peng,Jinchun Tu,Yang Cao

DOI: https://doi.org/10.1039/d0tb00082e

IF: 7.571

2020-01-01

Journal of Materials Chemistry B

Abstract:A reticulate TiO2 nanowire cluster electrode demonstrated higher sensitivity performance due to enhanced diffusion effect and more number of active sites.
The Fabrication of CNTs/TiO2 Photoanodes for Sensitive Determination of Organic Compounds

Lihong Li,Min Yang,Shanqing Zhang,Porun Liu,Guiying Li,William Wen,Haimin Zhang,Huijun Zhao

DOI: https://doi.org/10.1088/0957-4484/21/48/485503

IF: 3.5

2010-01-01

Nanotechnology

Abstract:Titanium dioxide (TiO2) and carbon nanotubes (CNTs) are the two most popular functional materials in recent years. In this study, CNTs/TiO2 composite and TiO2 photoanodes were fabricated by a dip-coating technique, followed by subsequent calcination. The resultant photoanodes were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), and UV-visible spectroscopy (UV-vis). The results suggest that the carbon nanotubes were successfully incorporated with the TiO2 nanoparticulates without damage and that the resultant TiO2 nanoparticles consisted of anatase and rutile. The CNTs/TiO2 photoanodes were capable of oxidizing various types of organic compounds (e. g. glucose, potassium hydrogen phthalate, and phenol) in aqueous solutions in a photoelectrochemical bulk cell. In comparison with the pure TiO2 photoanode, the sensitivity of the photoanode for the detection of organic compounds has been improved by 64%, while the background current was reduced by 80% due to the introduction of the CNTs. These advantages can be ascribed to the improved adsorptivity to organic compounds, increased absorption of UV light and enhanced electron transport at the CNTs/TiO2 photoanode due to the introduction of the CNTs.
Au Nanoparticle-Decorated TiO2 Nanowires for Surface Plasmon Resonance-Based Photoelectrochemical Bioassays with a Solid–Liquid–Air Triphase Interface

Dandan Wang,Zhenyao Ding,Hang Zhou,Liping Chen,Xinjian Feng

DOI: https://doi.org/10.1021/acsanm.1c01899

IF: 6.14

2021-01-01

ACS Applied Nano Materials

Abstract:Surface plasmon resonance (SPR)-induced photoelectrochemical (PEC) reaction has great potential in developing high-performance bioassay systems. In this study, we report a high-performance visible-light-active SPR-based PEC bioassay system by immobilizing oxidase on Au nanoparticle-decorated superhydrophobic TiO2 nanowire arrays with a solid-liquid-air triphase interface. Based on the triphase bio-photoelectrode, sufficient reactant oxygen can be directly acquired from the air phase with constant and rapid supply, which stabilizes and enhances the kinetics of oxidase catalytic reaction, leading to increased detection accuracy and a wider linear detection range. Moreover, the Au-TiO2 nanowire array-based bio-photoelectrode can be operated under visible light irradiation due to the SPR effect, which improves the stability of PEC bioassay system by avoiding potential deterioration of oxidase molecules in a traditional UV light environment. The SPR-based PEC bioassay with the solid-liquid-air triphase bio-photoanode is an alternative for better disease diagnosis and health monitoring.
Metalloporphyrin hemin modified carbon nanotube decorated titanium carbide with redox catalytic ability for electrochemical determination of hydrogen peroxide and uric acid

Peng Zhao,Sha Chen,Yi Liang,Yuanyuan Chen,Peng Lan,Danqun Huo,Changjun Hou

DOI: https://doi.org/10.1016/j.jcis.2022.07.190

2022-12-15

Abstract:Herein, a functional hybrid named metalloporphyrin hemin modified carbon nanotube decorated titanium carbide (Hemin/CNT/Ti3C2Tx) with redox catalytic ability is studied and applied to electrochemical sensing. The morphology, crystal structure and chemical composition of the hybrid are investigated through field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) analysis. Benefiting from the unique multilayer structure, strong enrichment ability, excellent electrochemical performance of CNT/Ti3C2Tx and outstanding catalytic property of hemin, the developed Hemin/CNT/Ti3C2Tx hybrid presents desirable performance for electrochemical sensing. Two independent electrochemical sensing techniques including chronoamperometry (i-t) and differential pulse voltammetry (DPV) are adopted to realize hydrogen peroxide (H2O2) and uric acid (UA) determination, demonstrating the excellent redox catalytic ability of Hemin/CNT/Ti3C2Tx. More importantly, it is successfully applied to real-time monitoring of H2O2 released from living cells, and accurate determination of UA in urine samples is also realized, demonstrating a good practicability.
Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid Tio2 Nanotubes and Its Highly Sensitive Biosensor Performance

Meichuan Liu,Guohua Zhao,Yiting Tang,Huijie Shi,Nianjun Yang

DOI: https://doi.org/10.1002/cjoc.201200883

IF: 5.56

2013-01-01

Chinese Journal of Chemistry

Abstract:The present work is focused on developing a novel biomaterial platform to achieve enhanced direct electron transfer (DET) of hemoprotein and higher biosensor performance on vertically aligned carbon hybrid TiO2 nanotubes (C-TiO2 NTs). Using a simple surfactant-assisted method, controllable hybridization of TiO2 NTs with conductive amorphous carbon species is realized. The obtained C-TiO2 NTs is ingeniously chosen to serve as an ideal "vessel" for protein immobilization and biosensor applications. Results show that the appropriate hybridization of C into TiO2 NTs leads to a much better conductivity of TiO2 NTs without destroying their preponderant tubular structures or damaging their excellent biocompatibility and hydrophilicity. When used in loading proteins, the C-TiO2 NTs can be used as a super vessel for rapid and substantive immobilization of hemoglobin (Hb), with a large surface electroactive Hb coverage () of 3.3x109 mol center dot cm2. Enhanced DET of Hb is commendably observed on the constructed Hb/C-TiO2 NTs biosensor with a couple of well-defined redox peaks in a fast electron transfer process. The biosensor further exhibits fast response, high sensitivity and stability for the amperometric biosensing of H2O2 with the detection limit as low as 3.1x108 mol/L.

Hemin/Au Nanorods/self-Doped TiO2 Nanowires As a Novel Photoelectrochemical Bioanalysis Platform.

Photoelectrochemical Detection of Glutathione by IrO2-hemin-TiO2 Nanowire Arrays.

Solar‐Energy‐Driven Photoelectrochemical Biosensing Using TiO 2 Nanowires

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Solar-driven photoelectrochemical probing of nanodot/nanowire/cell interface.

WO3 Nanoparticles Decorated Core-Shell TiC-C Nanofiber Arrays for High Sensitive and Non-Enzymatic Photoelectrochemical Biosensing.

In Situ Generation of Electron Acceptor for Photoelectrochemical Biosensing Via Hemin-Mediated Catalytic Reaction

Low-potential photoelectrochemical biosensing using porphyrin-functionalized TiO₂ nanoparticles.

A photoelectrochemical sensor for glutathione based on Bi 2 S 3 -modified TiO 2 nanotube arrays

Platinum and Iridium Oxide Co-modified TiO2 Nanotubes Array Based Photoelectrochemical Sensors for Glutathione

Hemin Modified TiO2 Nanoparticles with Enhanced Photoelectrocatalytic Activity for Electrochemical and Photoelectrochemical Sensing

High‐Performance Triphase Bio‐Photoelectrochemical Assay System Based on Superhydrophobic Substrate‐Supported TiO2 Nanowire Arrays

Anatase TiO2 Nanoparticle–graphene Nanocomposites: One-step Preparation and Their Enhanced Direct Electrochemistry of Hemoglobin

High Performance Hydrogenated TiO2 Nanorod Arrays As a Photoelectrochemical Sensor for Organic Compounds under Visible Light

Photoelectrochemical enzymatic sensor for glucose based on Au@C/TiO<sub>2</sub> nanorod arrays

Self-powered photoelectrochemical biosensing platform based on Au NPs@ZnO nanorods array

3D Hollow-out TiO2 Nanowire Cluster/gox As an Ultrasensitive Photoelectrochemical Glucose Biosensor.

The Fabrication of CNTs/TiO2 Photoanodes for Sensitive Determination of Organic Compounds

Au Nanoparticle-Decorated TiO2 Nanowires for Surface Plasmon Resonance-Based Photoelectrochemical Bioassays with a Solid–Liquid–Air Triphase Interface

Metalloporphyrin hemin modified carbon nanotube decorated titanium carbide with redox catalytic ability for electrochemical determination of hydrogen peroxide and uric acid

Direct Electrochemistry of Hemoglobin on Vertically Aligned Carbon Hybrid Tio2 Nanotubes and Its Highly Sensitive Biosensor Performance