Abstract:In this study, biosynthesized α-MnO2/NiO NPs and chemically oxidative polyaniline (PANI) were synthesized to form ternary composite anode material for MFC. The synthesized materials were characterized with different materials (UV-Vis, FTIR, XRD, TGA-DTA-DSC, SEM-EDX-Gwyddion, CV, and EIS) to deeply examine their optical, structural, morphological, thermal, roughness, and electrocatalytic properties. The degree of surface roughness for α-MnO2/NiO/PANI was 23.65 ± 5.652 nm . This value was higher than the pure α-MnO2, pure PANI, and even α-MnO2/PANI nanocomposite due to surface modification. The total charge storing performance for bare PGE, α-MnO2/PGE, PANI/PGE, α-MnO2/PANI/PGE, and α-MnO2/NiO/PANI/PGE were 5.291, 17.267, 20.659, 23.258, and 24.456 mC. From this, the charge storing performance formed by α-MnO2/NiO/PANI-modified PGE was highest, indicating that this electrode is best in cycle stability and increases its life cycle during energy conversion time in MFC. This is also supported by its effective surface area, having a value of 0.00984 cm2. From this, it is evidenced that the ternary composite catalyst-modified anode facilitates the fast electrocatalytic activity as observed from its high peak current and lower peak-to-peak potential separation ( Δ E p = 0.216 V ) than other electrodes. Such surface modification helps to store more electrical charge by increasing electrical conductivity during its charge/discharge processing time. In addition, the lower charge transfer resistance property with a value of 788.9 Ω and the fast heterogeneous electron transfer rate of ~2.92 s-1 enable to facilitate glucose oxidation, and this enhances to produce high power output and increase wastewater treatment efficiency. As a result, the bioelectrical activity of α-MnO2/NiO/PANI composite-modified PGE was very effective in producing a maximum power density of 506.96 mW m-2 with COD of 81.92%. The above observations justified that α-MnO2/NiO/PANI/PGE serves as an effective anode material in double-chambered MFC application.

Synthesis of PANI/VGCF Composite and Its Application in Microbial Fuel Cell

Polyaniline/Carbon Nanotubes Composite Modified Anode via Graft Polymerization and Self-Assembling for Microbial Fuel Cells

Polyaniline Synthesis by Cyclic Voltammetry for Anodic Modification in Microbial Fuel Cells

Calcined Polyaniline–iron Composite As a High Efficient Cathodic Catalyst in Microbial Fuel Cells

Enhanced electrochemical performance by polyaniline (PANI) on covalent organic framework - Carbon nanotube (COF-CNT) as cathode catalyst for microbial fuel cells

Fibrous polyaniline@manganese oxide nanocomposites as supercapacitor electrode materials and cathode catalysts for improved power production in microbial fuel cells

Enhancement of bioelectricity and hydrogen production from xylose by a nanofiber polyaniline modified anode with yeast microbial fuel cell

Polyaniline Networks Grown On Graphene Nanoribbons-Coated Carbon Paper With A Synergistic Effect For High-Performance Microbial Fuel Cells

Surface Roughness and Electrochemical Performance Properties of Biosynthesized α-MnO2/NiO-Based Polyaniline Ternary Composites as Efficient Catalysts in Microbial Fuel Cells

Application of Conductive Polymers in Biocathode of Microbial Fuel Cells and Microbial Community.

Polyaniline nanofiber: an excellent anode material for microbial fuel cells

Inkjet-printed Porous Polyaniline Gel As an Efficient Anode for Microbial Fuel Cells

Enhanced electricity generation performance and dye wastewater degradation of microbial fuel cell by using a petaline NiO@ polyaniline-carbon felt anode

Parametric Optimization and performance assessment of polyaniline graphene-impregnated electrode-based low-cost Microbial Fuel Cell using mixed culture obtained from Canteen wastewater

Self-Supporting Conductive Polyaniline–Sodium Alginate–Graphene Oxide/Carbon Brush Hydrogel as Anode Material for Enhanced Energy in Microbial Fuel Cells

Silver nanowire-doped conductive polymer hydrogel anode for increasing electron transfer and COD removal rate simultaneously in microbial fuel cell

Synthesis and characterization of polyaniline-based composites using cellulose nanocrystals as biological templates

Polyaniline-coated Partially Unzipped Vapor-Grown Carbon Fibers/sulfur Microsphere Composites for Li–S Cathodes

3D Porous Sponge/Carbon Nanotube/Polyaniline/Chitosan Capacitive Bioanode Material for Improving the Power Generation and Energy Storage Performance of Microbial Fuel Cells

The preparation of PANI-doped Co-Ni-ZIF carbonized derivatives and the exploration of EET process by the DFT calculation and the prediction of related functional genes

Polyaniline/β-MnO2 nanocomposites as cathode electrocatalyst for oxygen reduction reaction in microbial fuel cells