pharmaceutical dosage form soft gelatin capsule with guar gum modified

B. Muldoon,R. Loughlin,Emma Karen Boyd,Gerarde Sweeney

2014-03-14

Abstract:A pharmaceutical dosage form soft gelatin capsule comprising: a shell comprising gelatin and a plasticizer; and a filler comprising at least one pharmaceutically active, one or more polyethylene glycol ingredient, and hydroxypropyl guar.

Chemistry,Medicine,Materials Science

What problem does this paper attempt to address?

Gelatin and Non-Gelatin Capsule Dosage Forms

Rampurna P Gullapalli,Carolyn L Mazzitelli

DOI: https://doi.org/10.1016/j.xphs.2017.02.006

Abstract:Capsules offer an alternate to tablets for oral delivery of therapeutic compounds. One advantage of capsules over tablets is their amenability to deliver not only solids but also nonaqueous liquids and semisolids as a unit dose solid dosage form. Shell component is an essential part of capsule dosage forms. Capsule shells, available as hard or soft shells, are formulated from gelatin or a non-gelatin polymeric material such as hypromellose and starch, water, and with or without a nonvolatile plasticizer. The capsule shells may also be formulated to modify the release of their fill contents in a site-specific manner in the gastrointestinal tract. The goal of the current review is to provide an in-depth discussion on polymeric film-forming materials and manufacturing technologies used in the production of capsule shells.
Preparation of Sustained Release Capsules by Electrostatic Dry Powder Coating, Using Traditional Dip Coating As Reference

Yan Yang,Lian Shen,Feng Yuan,Hui Fu,Weiguang Shan

DOI: https://doi.org/10.1016/j.ijpharm.2018.03.047

IF: 6.51

2018-01-01

International Journal of Pharmaceutics

Abstract:Lately, a great deal of attention is being paid to capsule coating, since the coat protects active pharmaceutical ingredients (APIs) from damage, as is in the case of tablet and pellet. However, moisture and heat sensitivity of gelatin shells make it challenging to coat capsules using the conventional aqueous coating techniques. In an effort to overcome this challenge, the present study aims to coat capsules using two different coating techniques: electrostatic dry powder coating (EDPC) and dip coating (DC). Both capsule coatings and free films were prepared by these two coating techniques, and the effects of coating formulations and processing conditions on the film quality were investigated. The corresponding drug in vitro release and mechanisms were characterized and compared. The results of dissolution tests demonstrated that the drug release behavior of both EDPC and DC coated capsules could be optimized to a sustained release of 24 h, following the Fick's diffusion law. The results of this study suggest that EDPC method is better than DC method for coating capsules, with respect to the higher production efficiency and better stability, indicating that this dry coating technology has promised in gelatin capsule coating applications.
Evaluation of the effect of polymer composition on the rheological, mechanical properties and drug-released behavior of novel Eudragit L100-55/gelatin gastro-resistance uncoated capsule

Ramin Ramezani Kalmer,Afzal Karimi,Samira Gholizadeh Dogaheh,Mojgan Ghanbari,Dariush Samandarian,Atefeh Sadjadinia,Hamed Ramezanalizadeh,Seyedehmaryam Moosavi

DOI: https://doi.org/10.1007/s00289-024-05201-4

IF: 2.843

2024-03-12

Polymer Bulletin

Abstract:Capsules have been investigated as a popular oral dosage form among communities due to their simplicity and ease of production. Capsules that are considered in the gastro-resistance category can be very beneficial due to enhanced drug absorption, improved stability, targeted release, etc. This study investigated the effect of enteric polymers on uncoated hard capsule fabrication and dissolution properties. The polymers used in this study included HPMCPh and Eudragit L100-55. Eight different formulations based on HPMCPh, Eudragit, and gelatin were examined to identify the ideal formulation for the product of uncoated enteric hard capsules with preferred physicochemical and gastro-resistance properties. The results reveal that the capsules containing Eudragit (F1), HPMCPh (F2), Eudragit/HPMCPh/gelatin (F3), and Eudragit/gelatin (F4) are steady within the simulated stomach environment, and drug release does not occur for 120 min. The outcomes demonstrate that, among the proposed formulas, the F4 formula is suitable both in terms of capsulation form and delayed-release properties and shows no microbial growth. The properties of the optimized sample were studied by FTIR, FESEM, tensile strength, humidity, and rheology. The results illustrated that gelatin-based hydrogels with Eudragit (F4) are potential candidates for manufacturing uncoated enteric hard capsules that inhibit drug release in a gastric pH medium and act as a pH-sensitive drug-release system.

polymer science
Shell Formulation in Soft Gelatin Capsules: Design and Characterization

Almudena Naharros‐Molinero,María Ángela Caballo‐González,F. Javier Mata,Sandra García‐Gallego

DOI: https://doi.org/10.1002/adhm.202302250

IF: 10

2023-10-01

Advanced Healthcare Materials

Abstract:Soft gelatin capsules are the most widely used pharmaceutical form after tablets. The active components, active pharmaceutical ingredients or nutrients are dissolved or suspended in a liquid or semi‐solid fill, which is covered with a gelatin shell. Several factors can modify the properties of the gelatin shell and subsequently affect their operative handling during manufacturing process and the stability of the soft gelatin capsules. Three elements appear to be crucial: the shell formulation (type and content of the different components such as gelatin ‐source, extraction method‐, plasticizers, or additives); the manufacture and storage conditions (temperature, humidity, light) as well as the interactions between fill‐shell formulas. Mechanical and thermal analysis arise as straightforward but highly useful tools to monitor the properties of the gelatin shell. This review provides an updated overview on the shell formulation and design. Additionally, it presents the uses of mechanical and thermal techniques to characterize and evaluate the impact of different parameters on the gelatin behavior over the production and stability of these pharmaceutical forms. This will help to detect changes that are yet not visible by visual inspection ensuring a suitable finished product over its shelf‐life. This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Duocapsule and alternative shell material to gelatin: Advancement in capsule formulation

Babita Himmatrao More,Vaibahavi Pradeep Shirke,Aditya Sanjeev Bhambure,Rupali Rajesh Tasgaonkar

DOI: https://doi.org/10.30574/wjbphs.2023.13.2.0076

2023-02-28

World Journal of Biology Pharmacy and Health Sciences

Abstract:Owing to broad advantages like self-medication, unit dosage form, and patient compliance, cost effective, limited interaction with the excipients and possibility of mask the unpleasant taste, capsules are the most extensively recognized conventional solid dosage form after Tablet. In the world of Novel drug delivery system to overcome the disadvantages of conventional delivery system modifications are made in the capsule to develop a product of higher selectivity for medical treatment like the capsules that facilitates the controlled drug delivery, sustained and targeted release profiles with its own benefits as conventional dosage form. The advancement in capsules has led to the formation of different types of capsule formulations such as tablets in capsules, pellets in capsule and the capsule in another capsule, liquid in capsule products and pellets in capsule formulations. This article aims to highlights the advancement in the capsule system, particularly Duocapsules and capsules with capsule shell prepared with alternative shell material to gelatin. The Duo capsule is also called as capsule in capsule formulation as it contains two capsules one with the bigger size containing the smaller sized capsule inside it with different or same formulations in various forms such as liquids, solids, powders, tablets, pellets etc. The article mainly focuses on the different applications, advantages, formulation consideration, and applicable drugs of duo capsules. Considering the challenges invovled in manufacturing the gelatin shell and unstability of in different climatic conditions, the present article also emphasizes on the formulation development in capsule system with alternative polymers to the gelatin like HPMC, starch and PVA copolymer capsule shells.
Shell Materials for Chewable Capsules, From Design of Experiments to Optimal Dosage Form Manufacturing

Fanny Quemeneur,Annabel Igonin,Catherine Herry,Sophie Girod‐Fullana

DOI: https://doi.org/10.1002/admt.202400808

IF: 6.8

2024-10-20

Advanced Materials Technologies

Abstract:Optimizing the capsules softness expands their application potential for population facing difficulty swallowing solid dosage units. Tailoring shell material composition based on a mixture design of experiments led to two optimized shell materials demonstrating suitable manufacturability and texture as final dosage forms and obtained data pave the way for future product development. Innovations in chewable dosage forms provide solutions for swallowing difficulties faced by certain patient populations. Chewable softgel capsules (SGC) offer opportunities to expand the benefits of SGC, excelling in the delivery of lipid‐based formulations by optimizing the mechanical properties of the shell material without compromising industrial‐scale manufacturing. This study employs an original approach, with a target product profile that aims to combine processability and chewability, to develop optimized chewable dosage forms. Through a mixture design of experiments, key factors such as plasticizer content and the addition of acid‐modified thin‐boiling corn starch are explored, focusing on response parameters critical to achieving the desired properties of the capsule shell material. Optimal shell compositions—one starch‐free and another containing 9% w/w starch, with respective gelatin/non‐volatile plasticizer ratios of 0.81 and 0.67 are determined and evaluated by manufacturing chewable SGC at pilot scale using rotary die technology. The successful manufacturing and resulting capsules, which exhibit the intended properties, highlight the efficiency of this approach in striking the right balance between processability, soft texture, and quick disintegration time.

materials science, multidisciplinary
Soft capsule coating composition

Yoshiyuki Shimokawa,近藤洋介,下川義之,佐藤勲,Yosuke Kondo,I. Sato,勲佐藤,T. Sano,Kazuhiko Watanabe,渡邉和彦,佐野泰祐,和彦渡辺

2016-04-28

Abstract:PROBLEM TO BE SOLVED: To obtain a soft capsule agent which hardly causes softening of a capsule film and adhesion of a surface while using glycerin as a plasticizer, and is excellent in luster and transparency.SOLUTION: A capsule coating is prepared by forming a composition for a soft capsule coating comprising: a base containing gelatin as a main component; and a plasticizer containing sorbitol, maltitol and glycerin as a main component. Then, the prepared capsule coating is filled with the content of the capsule to prepare a soft capsule agent. The soft capsule agent of the present invention is excellent in plasticity and flexibility, does not cause adhesion between soft capsules or containers, and is excellent in luster and transparency.SELECTED DRAWING: None

Medicine,Materials Science
Frontier in gellan gum-based microcapsules obtained by emulsification: Core-shell structure, interaction mechanism, intervention strategies

Huihua Huang,Wenjing Yan,Shuliang Tan,Yihui Zhao,Hao Dong,Wenzhen Liao,Pengwei Shi,Xingfen Yang,Qi He

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132697

Abstract:As a translucent functional gel with biodegradability, non-toxicity and acid resistance, gellan gum has been widely used in probiotic packaging, drug delivery, wound dressing, metal ion adsorption and other fields in recent years. Because of its remarkable gelation characteristics, gellan gum is suitable as the shell material of microcapsules to encapsulate functional substances, by which the functional components can improve stability and achieve delayed release. In recent years, many academically or commercially reliable products have rapidly emerged, but there is still a lack of relevant reports on in-depth research and systematic summaries regarding the process of microcapsule formation and its corresponding mechanisms. To address this challenge, this review focuses on the formation process and applications of gellan gum-based microcapsules, and details the commonly used preparation methods in microcapsule production. Additionally, it explores the impact of factors such as ion types, ion strength, temperature, pH, and others present in the solution on the performance of the microcapsules. On this basis, it summarizes and analyzes the prospects of gellan gum-based microcapsule products. The comprehensive insights from this review are expected to provide inspiration and design ideas for researchers.
Liquid- and Semisolid-Filled Hard Gelatin Capsules Containing Alpha-Lipoic Acid as a Suitable Dosage Form for Compounding Medicines and Dietary Supplements

Jelena Jovičić-Bata,Nemanja Todorović,Veljko Krstonošić,Ivan Ristić,Zorana Kovačević,Milana Vuković,Mladena Lalić-Popović

DOI: https://doi.org/10.3390/pharmaceutics16070892

IF: 6.525

2024-07-04

Pharmaceutics

Abstract:Liquid-filled hard gelatin capsules may have pertinent advantages both for therapeutic effect and extemporaneous preparations of medicines. Alpha lipoic acid is a substance used in medicines and dietary supplements and there is a need for creating an appropriate formulation which would be suitable for each individual patient or consumer. Based on its biopharmaceutical and physical chemical characteristics, eight different capsule formulations were designed and characterized. Silicon dioxide was added to form a semisolid content and prevent leakage. The formulation filled with alpha lipoic acid solution in polyethylene glycol 400 showed the best performance. Although the addition of silicon dioxide to the formulation with polyethylene glycol 400 led to a change in both flow character and viscosity, the release rate did not show a statistically significant decrease (more than 85% of content was released after 5 min testing). Applied technique is a simple and an appropriate approach for compounding and could be used for other substances with similar properties.
Review on Modification of Glucomannan as an Excipient in Solid Dosage Forms

Nuur Aanisah,Yoga W. Wardhana,Anis Y. Chaerunisaa,Arif Budiman

DOI: https://doi.org/10.3390/polym14132550

IF: 5

2022-06-24

Polymers

Abstract:Glucomannan (GM)—a polysaccharide generally extracted from the tuber of Amorphophallus konjac—has great potential as a filler–binder in direct compression, disintegrant in tablets, or gelling agent due to its strong hydrophilicity and extremely high viscosity. However, it has poor water resistance and low mechanical strength when used as an excipient in solid form. Several physical and chemical modifications have been carried out to improve these drawbacks. Chemical modification affects the characteristics of GM based on the DS. Carboxymethylation improves GM functionality by modifying its solubility and viscosity, which in turn allows it to bind water more efficiently and thus improve its elongation and gel homogeneity. Meanwhile, physical modification enhances functionality through combination with other excipients to improve mechanical properties and modify swelling ability and drug release from the matrix. This review discusses extraction of GM and its modification to enhance its applicability as an excipient in solid form. Modified GM is a novel excipient applicable in the pharmaceutical industry for direct compression, as a tablet disintegrant, a film-forming agent, and for encapsulation of macromolecular compounds or drug carriers for controlled release.

polymer science
Sodium alginate/carboxymethyl starch/κ-carrageenan enteric soft capsule: Processing, characterization, and rupture time evaluation

Bing-De Zheng,Yi-Zhu Yu,Xiao-Lu Yuan,Xi-Sheng Chen,Yu-Cheng Yang,Na Zhang,Ya-Yan Huang,Jing Ye,Mei-Tian Xiao

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125427

2023-07-31

Abstract:Although gelatin has good characteristics in preparing soft capsules, its noticeable shortcomings force researchers to further develop substitutes for gelatin soft capsules. In this paper, sodium alginate (SA), carboxymethyl starch (CMS) and κ-carrageenan (κ-C) were used as matrix materials, and the formula of the co-blended solutions was screened through rheological method. In addition, films of the different blends were characterized by thermogravimetry analysis, SEM, FTIR, X-ray, water contact angle and mechanical properties. The results showed that κ-C had strong interaction with CMS and SA, and the mechanical properties of capsule shell were greatly improved by the addition of κ-C. When the ratio of CMS/SA/κ-C was 2:0.5:1.5, the microstructure of the films was more dense and uniform. In addition, this formula had the best mechanical properties and adhesion properties, and was more suitable for the production of soft capsules. Finally, a novel plant soft capsule was successfully prepared by dropping method, and its appearance and rupture properties met the requirements of enteric soft capsules. In simulated intestinal fluid, the soft capsules were almost completely degraded within 15 min, and they were superior to the gelatin soft capsules. Therefore, this study provides an alternative formula for preparing enteric soft capsules.
Design and preparation of a novel pullulan hard capsule formulation: A promising green candidate and study of crucial capsule features

Ramin Ramezani Kalmer,Afzal Karimi,Hamed Ramezanalizadeh,Mojgan Ghanbari,Dariush Samandarian,Atefeh Sadjadinia,Samira Gholizadeh Dogaheh,Seyedehmaryam Moosavi

DOI: https://doi.org/10.1016/j.heliyon.2024.e28969

IF: 3.776

2024-04-03

Heliyon

Abstract:Plant-based hard capsules have gained considerable attention because of their great properties. Accordingly, designing and developing of these kinds of capsules will be a difficult task. Herein, an innovative pullulan-based hard capsule formulation was prepared for the first time. A series of characterization approaches, including Fourier transform infrared, field emission scanning electron microscope, and rheology analysis, were utilized to figure out the straightforward preparation of a designed hard capsule. Many tests and experiments were performed to achieve the optimum capsule formulation. Based on the obtained results, specifications such as uniform downfall and non-desirable adhesion, and other ideal characteristics of the capsule display the critical function. The gelling promoter of divalent cationic salts is more beneficial than its single-valent counterparts. With respect to the key role of gelling promoter, the presence of chosen MgSO4.7H2O salt and the source of selected carrageenan are important parameters to achieve optimal formulation. Moreover, field emission scanning electron microscope images illustrate that the weight ratio of 3.5 (gelling agent to salt) displays uniform surface morphology without any impurities or other foreign materials. Likewise, the outcomes of the rheology test also illustrated that the weight ratio of 3.5 is preferable. Considering the different weight ratios, the benefits of a weight ratio of 3.5 outweigh the other investigated ratios. Overall, the current research addresses substantial information about developing pullulan-based hard capsules for target usage.
Commercially Available Enteric Empty Hard Capsules, Production Technology and Application

Aleš Franc,David Vetchý,Nicole Fülöpová

DOI: https://doi.org/10.3390/ph15111398

2022-11-13

Abstract:Currently, there is a growing need to prepare small batches of enteric capsules for individual therapy or clinical evaluation since many acidic-sensitive substances should be protected from the stomach's acidic environment, including probiotics or fecal material, in the fecal microbiota transplantation (FMT) process. A suitable method seems to be the encapsulation of drugs or lyophilized alternatively frozen biological suspensions in commercial hard enteric capsules prepared by so-called Enteric Capsule Drug Delivery Technology (ECDDT). Manufacturers supply these types of capsules, made from pH-soluble polymers, in products such as AR Caps®, EnTRinsicTM, and Vcaps® Enteric, or capsules made of gelling polymers that release their content as the gel erodes over time when passing through the digestive tract. These include DRcaps®, EMBO CAPS® AP, BioVXR®, or ACGcaps™ HD. Although not all capsules in all formulations meet pharmaceutical requirements for delayed-release dosage forms in disintegration and dissolution tests, they usually find practical application. This literature review presents their composition and properties. Since ECDDT is a new technology, this article is based on a limited number of references.
Prototype Gastro-Resistant Soft Gelatin Films and Capsules—Imaging and Performance In Vitro

Bartosz Maciejewski,Vishnu Arumughan,Anette Larsson,Małgorzata Sznitowska

DOI: https://doi.org/10.3390/ma13071771

IF: 3.4

2020-04-09

Materials

Abstract:The following study is a continuation of the previous work on preparation of gastro-resistant films by incorporation of cellulose acetate phthalate (CAP) into the soft gelatin film. An extended investigation on the previously described binary Gelatin-CAP and ternary Gelatin-CAP-carrageenan polymer films was performed. The results suggest that the critical feature behind formation of the acid-resistant films is a spinodal decomposition in the film-forming mixture. In the obtained films, upon submersion in an acidic medium, gelatin swells and dissolves, exposing a CAP-based acid-insoluble skeleton, partially coated by a residue of other ingredients. The dissolution-hindering effect appears to be stronger when iota-carrageenan is added to the film-forming mixture. The drug release study performed in enhancer cells confirmed that diclofenac sodium is not released in the acidic medium, however, at pH 6.8 the drug release occurs. The capsules prepared with a simple lab-scale process appear to be resistant to disintegration of the shell structure in acid, although imperfections of the sealing have been noticed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Solidification Studies of Polyethylene Glycols, Gelucire 44/14 or their Dispersions with Triamterene or Temazepam

Stephen K Dordunoo,James L Ford,Michael H Rubinstein

DOI: https://doi.org/10.1111/j.2042-7158.1996.tb03974.x

1996-08-01

Journal of Pharmacy and Pharmacology

Abstract:Abstract The solidification of polyethylene glycols (PEG 1500, PEG 2000, PEG 4000, PEG 6000), gelucire 44/14 or their dispersions containing triamterene or temazepam were studied to assess the feasibility of using these dispersions to liquid-fill hard gelatin capsules. Solidification from melts, investigated by differential scanning calorimetry using cooling cycles, showed a tendency of the drugs, carriers or their dispersions to supercool. The degree of supercooling depended on the rate of cooling, the drug content and, for the PEGs, on the molecular weight. PEG 1500 and PEG 2000 gave one morphological form, irrespective of cooling rate; PEG 4000 and PEG 6000 solidified into at least two forms, depending on the cooling rate. Incorporation of drugs affected the morphology of the PEGs during solidification. The rate of crystal growth was, furthermore, influenced by the fusion temperature, molecular weight and the degree of supercooling. The degree of crystallinity, as measured by the enthalpies of solidification, decreased with increasing cooling rate. The results show that reducing the rate of solidification could lead to incomplete solidification, giving products that are liable to change on storage.

pharmacology & pharmacy
Enhancing Pullulan Soft Capsules with a Mixture of Glycerol and Sorbitol Plasticizers: A Multi-Dimensional Study

Kecheng Zhou,Yucheng Yang,Bingde Zheng,Qiqi Yu,Yayan Huang,Na Zhang,Shriram Mourougane Rama,Xueqin Zhang,Jing Ye,Meitian Xiao

DOI: https://doi.org/10.3390/polym15102247

IF: 5

2023-05-10

Polymers

Abstract:The plasticizer is crucial in the plant-based soft capsule. However, meeting the quality requirements of these capsules with a single plasticizer is challenging. To address this issue, this study first investigated the impact of a plasticizer mixture containing sorbitol and glycerol in varying mass ratios and the performance of the pullulan soft film and capsule. The multiscale analysis demonstrates that the plasticizer mixture exhibits superior effectiveness in enhancing the performance of the pullulan film/capsule compared to a single plasticizer. Furthermore, thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy indicate that the plasticizer mixture enhances the compatibility and thermal stability of the pullulan films without altering their chemical composition. Among the different mass ratios examined, a 15:15 ratio of sorbitol to glycerol (S/G) is identified as the most optimal, leading to superior physicochemical properties and meeting the requirements for brittleness and disintegration time set by the Chinese Pharmacopoeia. This study provides significant insights into the effect of the plasticizer mixture on the performance of pullulan soft capsules and offers a promising application formula for future use.

polymer science
Potential of sago starch/carrageenan mixture as gelatin alternative for hard capsule material

Crescentiana Dewi Poeloengasih,Yudi Pranoto,Frida Dwi Anggraheni,Djagal Wiseso Marseno

DOI: https://doi.org/10.1063/1.4978108

2017-01-01

AIP Conference Proceedings

Abstract:In order to replace gelatin in capsule shell production, blends of sago starch and carrageenan were developed. Films and capsules were prepared with 10% (w/v) of sago starch, 25% (w/w starch) of glycerol and various carrageenan concentration (1, 2, 3% w/w starch) in two different kappa/iota-carrageenan ratio (1:3 and 3:1). The resulted films and capsules were characterized by mechanical property, water vapor and oxygen permeability. In addition, moisture absorption and solubility of capsule in acid solution were investigated. The results reveal that addition of carrageenan makes the films stronger and less permeable. Higher kappa-carrageenan content improved tensile strength and barrier properties of the films, whereas higher iota-carrageenan content produced films with higher elongation, moisture absorption and capsule solubility in acid solution. Capsule with 2% (w/w starch) of carrageenan at kappa-/iota-ratio 3:1 had the lowest moisture absorption, whereas capsule with 3% (w/w starch) of carrageenan at kappa/iota ratio 1:3 had the highest solubility. It is illustrated that sago starch/carrageenan blends can be used as hard capsule material.
Moisture sorption and desorption properties of gelatin, HPMC and pullulan hard capsules

Ning Yang,Huanfei Chen,Zhu Jin,Jingwen Hou,Yihui Zhang,Huijie Han,Yuanyuan Shen,Shengrong Guo

DOI: https://doi.org/10.1016/j.ijbiomac.2020.05.110

IF: 8.2

2020-09-01

International Journal of Biological Macromolecules

Abstract:<p>The moisture sorption and desorption properties of hard capsules have a great influence on the quality of capsule products. However, studies on them have rarely been reported. Herein, we studied the moisture sorption and desorption properties of three kinds of hard capsules (gelatin, hydroxypropyl methyl cellulose (HPMC) and pullulan capsules) in terms of hygroscopicity, crystallinity, thermal behaviors and so on. It is found that HPMC capsules have weaker moisture sorption ability and moisture keeping ability than pullulan or gelatin capsules with lower moisture sorption rates, equilibrium moisture contents, moisture keeping rates and higher critical relative humidity. In comparison with gelatin capsules, pullulan capsules have weaker moisture sorption ability and comparable moisture keeping ability. HPMC or pullulan capsules can more effectively protect high, moderate and low hygroscopic capsule contents (chitosan, potato starch or ethyl cellulose) from outside moisture absorption. The diffraction peaks of the moisture equilibrated gelatin, HPMC and pullulan capsules are much smaller than those of their dried ones. The dried and the moisture equilibrated gelatin, HPMC or pullulan capsules all have smooth surface morphology. HPMC or pullulan capsules can be an attractive alternative to animal gelatin capsules due to their appropriate moisture sorption and desorption properties.</p>

polymer science,biochemistry & molecular biology,chemistry, applied
Liquid Filled Hard Shell Capsules: Current Drug Delivery Influencing Pharmaceutical Technology

Prabhuti Nirale,Shivani Arora,Anita Solanki,Jnanadeva Bhat,Rishi Kumar Singh,Khushwant S Yadav

DOI: https://doi.org/10.2174/1567201818666210301094400

Abstract:Purpose: Gastric absorption is an upfront route for drug delivery as it is convenient, economical and most suitable for getting the desired systemic effects. Unfortunately, many traditional and newer generation drugs suffer from poor solubility and have lower bioavailability. With a perspective of bringing a novel delivery system in such a condition for old/existing/new drugs, liquidfilled hard capsules hold promise as the delivery system. Methods: Anorganizedstate of the art literature review including patents was conducted to accommodate information on the innovations in technology, processes, and applications in the field of liquid filling in hard-shell capsules. Results: The review findings revealed the importance of understanding the impact of liquid filled hard shell capsules would have in use of complex drug molecules, especially the ones sensitive to light and moisture. This technology can have diverse functions to be used for both immediate and delayed drug release. According to the technology point of view, the band sealing in such hardshell capsules helps in protecting against the tampering of capsule fill. Conclusion: The review provides an insight into the progression in the technology forefront related to formulation development of liquid formulations to be filled in hard shell capsules for better therapeutic potentials and convenience to the patients.
Effect of Gellan Gum and Xanthan Gum Synergistic Interactions and Plasticizers on Physical Properties of Plant-Based Enteric Polymer Films

Na Zhang,Xiaohui Li,Jing Ye,Yucheng Yang,Yayan Huang,Xueqin Zhang,Meitian Xiao

DOI: https://doi.org/10.3390/polym12010121

IF: 5

2020-01-05

Polymers

Abstract:The mechanical and barrier properties of plant-based enteric polymer films were enhanced by synergistic interactions between binary gum mixtures and adding plasticizers. The results indicated that the best ratio of gellan gum (GG) and xanthan gum (XG) was 7:3 by comparing tensile strength, tensile elongation, transmittance, and water vapor permeability of plant-based enteric polymer films and rheological properties of solutions. Polyethylene glycol 400 (PEG-400) was an effective plasticizer in improving plasticity and water vapor barrier property of the plant-based enteric polymer film. Rheology measurement and different characterization methods, including Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy, were used to explain interactions between GG and XG as well as PEG-400 and components of the film. The new mixed system, composed of GG/XG mixture with ratio of 7:3 as a novel gelling agent and PEG-400 as a plasticizer, was applied to prepare plant-based enteric hard capsules, which have potential applications in medicines and functional food preparations.

polymer science

pharmaceutical dosage form soft gelatin capsule with guar gum modified

Gelatin and Non-Gelatin Capsule Dosage Forms

Preparation of Sustained Release Capsules by Electrostatic Dry Powder Coating, Using Traditional Dip Coating As Reference

Evaluation of the effect of polymer composition on the rheological, mechanical properties and drug-released behavior of novel Eudragit L100-55/gelatin gastro-resistance uncoated capsule

Shell Formulation in Soft Gelatin Capsules: Design and Characterization

Duocapsule and alternative shell material to gelatin: Advancement in capsule formulation

Shell Materials for Chewable Capsules, From Design of Experiments to Optimal Dosage Form Manufacturing

Soft capsule coating composition

Frontier in gellan gum-based microcapsules obtained by emulsification: Core-shell structure, interaction mechanism, intervention strategies

Liquid- and Semisolid-Filled Hard Gelatin Capsules Containing Alpha-Lipoic Acid as a Suitable Dosage Form for Compounding Medicines and Dietary Supplements

Review on Modification of Glucomannan as an Excipient in Solid Dosage Forms

Sodium alginate/carboxymethyl starch/κ-carrageenan enteric soft capsule: Processing, characterization, and rupture time evaluation

Design and preparation of a novel pullulan hard capsule formulation: A promising green candidate and study of crucial capsule features

Commercially Available Enteric Empty Hard Capsules, Production Technology and Application

Prototype Gastro-Resistant Soft Gelatin Films and Capsules—Imaging and Performance In Vitro

Solidification Studies of Polyethylene Glycols, Gelucire 44/14 or their Dispersions with Triamterene or Temazepam

Enhancing Pullulan Soft Capsules with a Mixture of Glycerol and Sorbitol Plasticizers: A Multi-Dimensional Study

Potential of sago starch/carrageenan mixture as gelatin alternative for hard capsule material

Moisture sorption and desorption properties of gelatin, HPMC and pullulan hard capsules

Liquid Filled Hard Shell Capsules: Current Drug Delivery Influencing Pharmaceutical Technology

Effect of Gellan Gum and Xanthan Gum Synergistic Interactions and Plasticizers on Physical Properties of Plant-Based Enteric Polymer Films