Abstract:Abstract To enable accurate characterization of the mechanical behavior of materials at the micro-scale, e.g., in micro-systems, experiments are required that are representative of the actual (often multi-axial) loading conditions to which these materials are subjected during fabrication and operation. Equally important is the acquisition of mechanical data in the form of multi-axial force measurements, and the measurement of kinematics by in-situ microscopic techniques. To this end, a micro-mechanical testing rig is here realized using commercially available piezoelectric actuators. It is shown that the setup measures forces with a resolution of $\sim 0.3$ ∼ 0.3 [mN] in the x - and y -directions, and $\sim 50$ ∼ 50 [mN] in the z -direction, over a range of 5 [N], yielding a high dynamic (force) range. Furthermore, displacements can be imposed with a resolution of $\sim 1$ ∼ 1 [nm] over a range of 200 [ μ m], in all three directions ( x , y , z ). The setup is compact, vacuum compatible, and specimens are loaded on top of the setup so that the field of view is unobstructed, allowing for in-situ testing with optical and scanning electron microscopy, and optical profilometry. A generic method is developed for extracting quasi-static forces from the piezoelectric actuators. Furthermore, challenges raised from the use of commercial actuators, for which the public technical specifications are generally incomplete, are overcome and the solution strategy is described. Proof-of-concept experiments on flexible, organic, light-emitting diodes demonstrate the potential of the setup to provide rich micro-mechanical data in the form of tri-axial force and displacement measurements. The commercial availability of the piezoelectric actuators, combined with the proposed engineering solutions lead to a generally accessible micro-mechanical test setup to investigate small-scale specimens under realistic, multi-axial loading conditions.

Numerical and experimental characterization of a piezoelectric actuator for microfluidic cell sorting

A Piezoelectric Micropumping Device

A Microfluidic Device Based On Gravity And Electric Force Driving For Flow Cytometry And Fluorescence Activated Cell Sorting

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Micro/nano Acoustofluidics: Materials, Phenomena, Design, Devices, and Applications.

Surface Acoustic Wave-Based Microfluidic Device for Microparticles Manipulation: Effects of Microchannel Elasticity on the Device Performance

Theoretical and Experimental Studies of a PDMS Pneumatic Microactuator for Microfluidic Systems

Microfluidic pressure-driven flow of a pair of deformable particles suspended in Newtonian and viscoelastic media: A numerical study

An In-Situ, Micro-Mechanical Setup with Accurate, Tri-Axial, Piezoelectric Force Sensing and Positioning

Computational and experimental microfluidics: Total analysis system for mixing, sorting, and concentrating particles and cells

Numerical Modeling of Physical Cell Trapping in Microfluidic Chips

Piezoelectric pump with flexible venous valves for active cell transmission

Simulations and Analysis of a Piezoelectric Micropump.

Three-dimensional modeling and experimentation of microfluidic devices driven by surface acoustic wave

Dissecting cell membrane tension dynamics and its effect on Piezo1-mediated cellular mechanosensitivity using force-controlled nanopipettes

Microfluidic Fluorescence-Activated Cell Sorting (μfacs) Chip with Integrated Piezoelectric Actuators for Low-Cost Mammalian Cell Enrichment

Development and Testing of a Dual-Driven Piezoelectric Microgripper with High Amplification Ratio for Cell Micromanipulation

Capillary-based, multifunctional manipulation of particles and fluids via focused surface acoustic waves

Deciphering viscoelastic cell manipulation in rectangular microchannels