Load-displacement hysteretic behavior of concrete filled double skin (CHS inner and SHS outer) steel tubular columns
Hong HUANG,Linhai HAN,Zhong TAO
DOI: https://doi.org/10.3321/j.issn:1000-6869.2006.02.010
2006-01-01
Abstract:The flexural force-deformation behavior of 12 concrete filled double skin steel tubular(CFDSST) columns with circular hollow section(CHS) inner and square hollow section(SHS) outer and four concrete filled steel tubular(CFST) columns were studied and the results are presented in this paper.The parameters are the axial compression ratio and hollow section ratio.Test results show that the hysteretic curves of the columns are good.The CFDSST columns and the CFST columns have significant increase in ductility of the outer jacket.With the increasing of axial load level,the initial flexural stiffness increases,but the flexural stiffness degrades rapidly.Comparisons are made with flexural stiffness predicted by the existing codes for CFDSST columns.Results show that,AISC-LRFD(1999)、EC4(1994)、BS5400(1979)、DBJ 13-51(2003) methods are in good agreement with the tested initial section flexural stiffness,and DBJ 13-51(2003) method predicts best with the tested serviceability-level section flexural stiffness.A mechanics model is developed in this paper for CFDSST columns with CHS inner and SHS outer.The curves of lateral load(P) versus lateral displacement(Δ) of CFDSST are in agreement with test results.Parametric analysis are performed on the behaviors of lateral load versus lateral displacement relationship for the composite columns,the parameters include: the axial compression level,hollow section ratio,slenderness ratio,nominal steel ratio,strength of the materials,etc.