Stiffness Analysis for Concrete-Filled Steel Tubular Space Frames

CHEN Lin,ZHANG Su-mei,CHEN Hong-tao

2001-01-01

Abstract:Presents the separation of composite compressive modulus and composite bending modulus for application to the calculation of concrete-filled steel tubular frames and analyses the effects of these two kinds of modulus on the stiffness of concrete-filled steel tubular space frames under vertical load and horizontal wind load.

What problem does this paper attempt to address?

Analysis of Concrete Filled Steel Tubular Frames by Using Different Modulus

陈麟,张素梅,陈洪涛

2000-01-01

Abstract:There are two kinds of modulus of concrete filled steel tubes that can be used in design, one is composite compressive modulus, the other is composite bending modulus. This paper mainly discussed the effects of steel ratio、 steel types and concrete strength levels on the analysis of concrete filled steel tubular frames under vertical load and horizontal wind load.
Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Shenhao Wang,Genshu Tong,Lei Zhang

DOI: https://doi.org/10.1016/j.jcsr.2016.12.003

IF: 4.349

2017-01-01

Journal of Constructional Steel Research

Abstract:In this paper, a theory is developed for analysis of steel-concrete composite beams with interfacial slip and shear deformation in steel considered. Closed-form solutions are derived for simply supported composite beam under uniform and mid-span concentrated load respectively. Examples are given to compute various quantities of beams. Comparing the results calculated by closed-form solutions with those by ANSYS, good agreements are found. Finally, an explicit formula for the equivalent bending stiffness of the composite beams is found by which the deflections of the composite beams can be calculated as if they were common Bernoulli beams.
Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

JIAO Yu-Feng,YI Jian-Long,CHEN Shui-Fu

2008-01-01

Abstract:Owing to the limitation of establishing finite element model of concrete-filled steel tubular(CFST) arch bridge,the more precision model has been put forward.Namely the outer steel tubes,the inner concrete and the reinforcing steel bars have their own elements.Using this method,a CFST arch bridge's deflection curve under different load is obtained considering the material and geometric nonlinearity.The computed results are in agreement with the test data.The result shows that the method used in this paper has better adaptability and definition.
Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

K. K. Choi,Y. Xiao

DOI: https://doi.org/10.1061/(asce)st.1943-541x.0000156

2009-01-01

Journal of Structural Engineering

Abstract:This paper describes a numerical program to analyze the behavior of the concrete-filled steel tubular (CFT) stub columns, and predict various modes of lateral interactions between steel tube and filled-in-concrete under axial compression. The behavior of the CFT columns is controlled by both the strength and the confinement effect of steel tube and filled-in-concrete in the columns. Various lateral interactions between steel tube and filled-in-concrete in CFT columns are classified into eight different cases by the contact between steel tube and filled-in concrete at different stress stages. The paper examines the analytical models with various experimental results in literature. The comparisons showed that the numerical program is reasonable to capture mechanical behavior of concrete-filled circular steel tubes.
LOAD TRANSFER IN CONCRETE-FILLED STEEL TUBULAR COLUMNS CONSIDERING SLIP STIFFNESS

Xiao-gang LI,Gen-shu TONG

DOI: https://doi.org/10.6052/j.issn.1000-4750.2016.06.0489

2017-01-01

Abstract:The slip stiffness of concrete-filled steel tubes is proposed.The axial force,interface shear stress and slip formulas of concrete-filled steel tubular columns under uniformly distributed and concentrated loads are obtained.It is found that the axial compression stiffness of concrete-filled steel tube remains unchanged in consideration of slip.The results of the bond-slip tests of 39 concrete-filled square steel tube specimens and 18 concrete-filled circular steel tube specimens are analyzed and the values of interface slip stiffness are obtained.Concrete-filled steel tubular column models are established in ANSYS.The influence of the thickness of the cap on the stress distribution of concrete and axial compression stiffness of column is analyzed.The analysis results show that the cap on top is important to guarantee the composite action between the steel section and the concrete core.
Analytical behavior of frames with steel beams to concrete-filled steel tubular column

Wen-Da Wang,Lin-Hai Han,Xiao-Ling Zhao

DOI: https://doi.org/10.1016/j.jcsr.2008.11.002

IF: 4.349

2009-01-01

Journal of Constructional Steel Research

Abstract:This paper reports the mechanism of composite frames with steel beams connected to concrete-filled square hollow section (SHS) columns. Detailed analysis was carried out on longitudinal stress in steel beams, axial stress distribution in concrete, and concrete stress along the column height and at the connection panel. Parametric studies were conducted to investigate the influence of axial load level, beam-to-column linear stiffness ratio on the structural behavior of composite frames. Simplified hysteretic lateral load (P) versus lateral displacement (Δ) models are proposed for such composite frames.
Analysis and Design of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns under Axial Compression

Zhong Tao,Brian Uy,Lin-Hai Han,Zhi-Bin Wang

DOI: https://doi.org/10.1016/j.tws.2009.05.006

IF: 5.881

2009-01-01

Thin-Walled Structures

Abstract:Longitudinal stiffeners are effective in improving the overall performance of concrete-filled square or rectangular thin-walled steel tubular columns. This paper is concerned with the nonlinear analysis and design of stiffened square stub columns under axial compression. The nonlinear analysis is performed using ABAQUS, a commercially available finite element (FE) program. Close agreement is shown between the test and predicted results in terms of the load-deformation curves and ultimate strength. The column behaviour is investigated and discussed using this modelling. The limit of width-to-thickness ratio for the sub-panels and the rigidity requirement for the stiffeners is discussed. The feasibility using existing design codes to predict the load-carrying capacities of the stiffened composite columns is also dealt with in this paper.
Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Aoyu Jiang,Ju Chen,Weiliang Jin

2012-01-01

Abstract:A series of bending tests of thin-walled concrete-filled cold-formed steel tubes(CFST) were presented in this study. A total of 4 specimens were tested, two square specimens and two rectangular specimens, with width to wall thickness ratio ranging from 50 to 100. The failure mode and ultimate capacity of test specimens were obtained. A novel nonlinear analytical model was developed for the hin-walled CFSTs under bending. Nonlinear constitutive models of the confined concrete and steel tube, corner strength enhancement of the steel cross-sections, welding residual stress and local buckling were considered in the developed model. The predicted capacity calculated using the model proposed and it si shown that the model predictions agreed with the test result well. In addition, predictions from current AISC standard, Eurocode 4 and model proposed by other researcher were also compared with the test results.
Simplified second-order analysis of concrete filled steel tubular frame

Wenda Wang,LinHai Han

2007-01-01

Abstract:The simplified second-order analysis on the mechanics behavior of the frame which composed of concrete filled steel tubular (CFST) column and H shape steel beam under sustaining axial load and lateral loads is completed. The beam-column element equations were based on plastic hinge theory and double variables moment to curvature model of CFST columns and variational stiffness model. The second-order elastic analysis, second-order elastic plastic-hinge analysis and second-order rigid-plastic analysis were performed respectively. The load versus deformation curves of CFST frame were obtained by the method conveniently and quickly. The results are much coincided with the tested results and FEM results from the author researcher group. On the base of this, the practice load versus displacement curve model of CFST frames was given.
Analytical behavior of circular concrete-filled thin-walled steel tubes subjected to bending

Hui Lu,Lin-Hai Han,Xiao-Ling Zhao

DOI: https://doi.org/10.1016/j.tws.2008.07.004

IF: 5.881

2009-01-01

Thin-Walled Structures

Abstract:This paper presents a finite element analysis (FEA) modeling to study the flexural performance of circular concrete-filled thin-walled steel tubular (CFST) beam. A set of test data was used to verify the FEA modeling; generally, good agreement was achieved. The FEA modeling was then used to investigate the stress and strain distributions across the composite section in the whole loading procedure. The composite action between the steel tube and its concrete core was analyzed. A strut–tie model was proposed for the load transfer mechanism of the circular composite member subjected to pure bending.
Simplified Second-Order Elastic-Plastic Analyses on Mechanics Behavior of Concrete Filled Steel Tubular Frame

WANG Wenda,HAN Linhai

DOI: https://doi.org/10.3321/j.issn:1000-0054.2009.09.007

2009-01-01

Abstract:A simplified second-order elastic-plastic analyses method was developed to quickly determine the load-displacement curve for composite frames composed of concrete filled steel tubular(CFST) columns and H shaped steel beams.The beam-column element equations are based on plastic hinge theory and a variational stiffness model.The load-deformation curves of a CFST frame were then obtained by using the second-order elastic-plastic analysis method conveniently and quickly.The results agree well with experimental and FEM results.On the base of this, the practice load versus displacement curve model of CFST frames was proposed.
Analytical behaviour of concrete-filled double skin steel tubular (CFDST) stub columns

Hong Huang,Lin-Hai Han,Zhong Tao,Xiao-Ling Zhao

DOI: https://doi.org/10.1016/j.jcsr.2009.09.014

IF: 4.349

2010-01-01

Journal of Constructional Steel Research

Abstract:This paper reports a finite element analysis of the compressive behaviour of CFDST stub columns with SHS (square hollow section) or CHS (circular hollow section) outer tube and CHS inner tube. A set of test data reported by different researchers were used to verify the FE modelling. Typical curves of average stress versus longitudinal strain, stress distributions of concrete, interaction of concrete and steel tubes, as well as effects of hollow ratio on the behaviour of CFDST stub columns, were presented. The influences of important parameters that determine sectional capacities of the composite columns were investigated.
Experimental Behaviour of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns

Z Tao,LH Han,ZB Wang

DOI: https://doi.org/10.1016/j.tws.2007.04.003

IF: 5.881

2007-01-01

Thin-Walled Structures

Abstract:An experimental study on the structural behaviour of concrete-filled stiffened thin-walled steel tubular columns is presented in this paper. The stiffening was achieved by welding longitudinal stiffeners on the inner surfaces of the steel tubes. Companion tests were also undertaken on 12 unstiffened concrete-filled steel tubular (CFST) columns, with or without steel fibres in the infill concrete. The test results showed that the local buckling of the tubes was effectively delayed by the stiffeners. The plate buckling initially occurred when the maximum load had almost reached for stiffened specimens, thus they had higher serviceability benefits compared to those of unstiffened ones. Some of the existing design codes were used to predict the load-carrying capacities of the tested composite columns.
Effective Stiffness of Rectangular Concrete Filled Steel Tubular Members

Hong-Song Hu,Jian-Guo Nie,Yu-Hang Wang

DOI: https://doi.org/10.1016/j.jcsr.2015.09.016

IF: 4.349

2016-01-01

Journal of Constructional Steel Research

Abstract:Concrete filled steel tubular (CFST) members are efficient structural members and have been widely used in seismic areas. The effective stiffness of CFST members is important in the structural design for determining the buckling capacity of a member, and evaluating the elastic deformations and internal forces of a structure, but current understanding is not sufficient on it. To address this, a theoretical modal was developed on the basis of a perfect bonding assumption and assumed strain distributions. Design equations were derived and errors induced by the assumptions were corrected using finite element analyses. The proposed equations for the effective flexural and shear stiffness of section consist of the full stiffness of steel tube and a reduced stiffness provided by the concrete infill. The reduction factors for the concrete contribution are related to the level of axial force and the ratio of axial stiffness of steel to concrete. From investigation of available test results, it was found that the proposed equations could well predict the stiffness of CFST members under different loading conditions, and could be used in engineering practice.
Nonlinear Analysis of the Axial Performance of Concrete Filled Stiffened Thin-Walled Steel Tubes

Zhong Tao,Brian Uy,Lin-Hai Han,Zhi-Bin Wang

2008-01-01

Abstract:This paper is concerned with the topic of nonlinear analysis on concrete filled stiffened thin-walled steel tubular stub columns under axial compression. ABAQUS software is used to perform the finite element analysis (FEA). A comparison of results calculated using this modelling shows good agreement with the test results. The FEA modelling was used to investigate the influence of stiffeners on the column behaviour.
Finite Element Analysis On Load-Bearing Behavior Of Concrete Filled Steel Tubular Composite Framese

Yuan Huang,Weijian Yi,Jianguo Nie

DOI: https://doi.org/10.4028/www.scientific.net/AMM.71-78.1683

2011-01-01

Applied Mechanics and Materials

Abstract:This paper presents a nonlinear finite element (FE) analysis on the mechanic behavior of concrete filled steel tubular (CFST) composite frames. The main purpose of the FE analysis was to investigate the seismic behavior of composite frames. Three kinds of nonlinearity, namely material nonlinearity, contact nonlinearity and geometry nonlinearity, were taken into account in the FE model using MSC.Marc. The element type, connection between element, material constitutive law and boundary condition was described in detail. The elasto-plastic behavior, as well as fracture and post-fracture behavior, of the FE analysis models fitted well with those of the test specimens. The beam and panel zone deformation of the analysis models is also in good agreement with that of the test specimen. It is concluded that FE model of CFST composite frame is reliable and could be regarded as a helpful tool to expand the information on seismic behavior of CFST composite frame.
Numerical Investigation on the Performance of Concrete-Filled Double-Skin Steel Tubular Members under Tension

Wei Li,Lin-Hai Han,Tak-Ming Chan

DOI: https://doi.org/10.1016/j.tws.2014.02.001

IF: 5.881

2014-01-01

Thin-Walled Structures

Abstract:This paper presents a numerical investigation on the tensile behaviour of concrete-filled double-skin steel tubular (CFDST) member. A comprehensive finite element (FE) model is established and calibrated against the test results for the CFDST members under concentric and eccentric tension. The comparison shows that the proposed FE model is capable to capture the structural behaviour of the tensile specimens. Parametric studies are then conducted to investigate the influence of some key parameters, such as the material strength, the nominal steel ratio and the hollow ratio on the tensile behaviour of composite members. The steel–concrete composite action, the effect of loading paths and the tension–bending interaction diaphragm are also discussed. It is found that the tensile strength of the member depends on the composite action between steel tubes and sandwich concrete, and the tension–bending interaction diaphragm can be represented by a simple linear relationship. Finally, the design equation to predict the tensile strength of CFDST member is proposed, and the comparison results show that the proposed equation has a good accuracy.
Flexural Performance of Concrete-Encased Concrete-Filled Steel Tubes

Yu-Feng An,Lin-Hai Han,Charles Roeder

DOI: https://doi.org/10.1680/macr.13.00268

IF: 2.46

2014-01-01

Magazine of Concrete Research

Abstract:The flexural performance of concrete-encased concrete-filled steel tubes (CFSTs) was investigated. A finite-element analysis (FEA) model is developed to analyse the flexural behaviour of the composite member and a set of test data used to verify the FEA modelling. Full-range analysis of the moment–curvature relation, the stress distributions across the composite section and the interactions between steel and concrete was carried out. It was found that thin-walled steel tubes can be used in concrete-encased CFSTs and develop full plastic strength without local buckling before reaching the ultimate state. A strut-and-tie model is proposed for the load transfer mechanism of a concrete-encased CFST member under bending. Finally, the paper presents a parametric study to derive simplified formulas for predicting the flexural capacity of concrete-encased CFST sections.
ANALYSIS MODEL OF STEEL-TUBE CONFINED CONCRETE COLUMN AND RC BEAM FRAME CONNECTED BY RC RING BEAM

Dong-liang ZHOU,Jia-ru QIAN,Xiao-dan FANG

DOI: https://doi.org/10.3969/j.issn.1000-4750.2005.06.020

2005-01-01

Abstract:For the steel tube confined concrete (STCC) column-RC beam frame connected by reinforced concrete (RC) ring beam subjected to combined vertical and horizontal loads, there may be a very narrow gap between the ring beam and the column at certain height. The gap has influence on the frame stiffness. By finite element analysis (FEA) of the beam-column joints, the rotation stiffness and the equivalent beam width of the ring beam connector are examined, and the influence factors are investigated. It is found that the ring beam and the frame beam width have significant influence on the rotation stiffness and the equivalent width. Static and pseudo-dynamic tests on a two bay-two story STCC column-RC beam space frame with RC ring beam connectors have been performed. The test results are compared with the analysis results of a 3-bay 10-story frame. It is shown that treating the STCC column- RC beam as rigid joint is reasonable during the analysis of STCC column-RC beam frame connected by RC ring beam.
Behaviour Of Concrete-Filled Square Steel Tubular Columns With Stiffeners Under Concentric Compression

Z Tao,Zb Wang,Lh Han

2004-01-01

Abstract:Test results on concrete-filled square steel tubular stub columns with longitudinal inner and outer welded stiffeners under concentric compression are presented in this paper. A longitudinal stiffener was provided at each side of the tube. The main experimental parameters considered were the width-to-thickness ratio and stiffener rigidity. Moreover, empty tubes with or without stiffeners, as well as unstiffened concrete-filled square steel, tubes were also tested for comparison. Results from the study indicated that, compressive load of the composite stub columns was increased when stiffeners were provided. The stiffeners can effectively delay the local buckling of the tube, as well as improve the lateral confinement on concrete core.

Stiffness Analysis for Concrete-Filled Steel Tubular Space Frames

Analysis of Concrete Filled Steel Tubular Frames by Using Different Modulus

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

LOAD TRANSFER IN CONCRETE-FILLED STEEL TUBULAR COLUMNS CONSIDERING SLIP STIFFNESS

Analytical behavior of frames with steel beams to concrete-filled steel tubular column

Analysis and Design of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns under Axial Compression

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Simplified second-order analysis of concrete filled steel tubular frame

Analytical behavior of circular concrete-filled thin-walled steel tubes subjected to bending

Simplified Second-Order Elastic-Plastic Analyses on Mechanics Behavior of Concrete Filled Steel Tubular Frame

Analytical behaviour of concrete-filled double skin steel tubular (CFDST) stub columns

Experimental Behaviour of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns

Effective Stiffness of Rectangular Concrete Filled Steel Tubular Members

Nonlinear Analysis of the Axial Performance of Concrete Filled Stiffened Thin-Walled Steel Tubes

Finite Element Analysis On Load-Bearing Behavior Of Concrete Filled Steel Tubular Composite Framese

Numerical Investigation on the Performance of Concrete-Filled Double-Skin Steel Tubular Members under Tension

Flexural Performance of Concrete-Encased Concrete-Filled Steel Tubes

ANALYSIS MODEL OF STEEL-TUBE CONFINED CONCRETE COLUMN AND RC BEAM FRAME CONNECTED BY RC RING BEAM

Behaviour Of Concrete-Filled Square Steel Tubular Columns With Stiffeners Under Concentric Compression