Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Preparation of Fe3O4/TiO2/Polypyrrole Ternary Magnetic Composite and Using As Adsorbent for the Removal of Acid Red G

Synthesis of polypyrrole-modified TiO2 composite adsorbent and its adsorption performance on acid Red G

Preparation of Magnetic G-C3n4/fe3o4 Composite and Its Application in the Separation of Catechol from Water

The influence of various inorganic acids on the adsorption performance of the polypyrrole/TiO2 composites

Synthesis of PPy-modified TiO2 Composite in H2SO4 Solution and Its Novel Adsorption Characteristics for Organic Dyes

Enhanced adsorption capacity of polypyrrole/TiO2 composite modified by carboxylic acid with hydroxyl group

Magnetic powder MnO-Fe2O3 composite--a novel material for the removal of azo-dye from water.

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Preparation And Adsorption Of 2-Nitro-1,3-Benzenediol Of Fe3o4/Go/Ppy Composite

Study of the Preparation and Performance of TiO2-Based Magnetic Regenerative Adsorbent

RhB Adsorption Performance of Magnetic Adsorbent Fe3O4/RGO Composite and Its Regeneration Through A Fenton-like Reaction

Facile preparation of Fe2O3 Al2O3 composite with excellent adsorption properties towards Congo red

Highly Efficient Magnetic Separation of Organic Dyes from Liquid Water Utilizing Fe3O4@graphene Composites

Preparation of TiO2/Fe3O4 composite by sol-gel method and its photocatalytic activity for removal of Rhodamine B from water

CuFe2O4/activated Carbon Composite: a Novel Magnetic Adsorbent for the Removal of Acid Orange II and Catalytic Regeneration.

Fe3O4@C@polyaniline trilaminar core–shell composite microspheres as separable adsorbent for organic dye

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

Facile Light-Assisted Preparation of Reusable Magnetic Fe3O4@SiO2@Chitosan Composite for Adsorption of Dyes

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Excellent adsorption and desorption characteristics of polypyrrole/TiO 2 composite for Methylene Blue

Fabrication of core–shell Fe 3 O 4 @polypyrrole@sodium dodecyl benzene sulfonate composite for high-performance adsorption of methylene blue and malachite green in water