2D Atomically Thin Electrocatalysts: from Graphene to Metallene
Cheng Tang,Shi‐Zhang Qiao
DOI: https://doi.org/10.1016/j.matt.2019.10.023
IF: 18.9
2019-01-01
Matter
Abstract:Thinning materials down to atomic thickness can endow them with unusual physiochemical properties and make for intriguing applications. Although a number of two-dimensional graphene analogs have been developed, preparing atomically thin metallic materials remains a significant, practical challenge. Recently in Nature, Luo et al. successfully synthesized a freestanding 4-atomic-thick PdMo bimetallene and demonstrated a record electrocatalytic oxygen reduction reaction activity in alkaline electrolyte. We conclude that this bimetallene will provide an ideal model to investigate the active-site catalytic-activity relationship and to optimize electrocatalytic performance at the atomic level. Future synthesis of noble-metal-free metallene (e.g., Fe, Co, Ni, Cu, and Mo) is anticipated. Thinning materials down to atomic thickness can endow them with unusual physiochemical properties and make for intriguing applications. Although a number of two-dimensional graphene analogs have been developed, preparing atomically thin metallic materials remains a significant, practical challenge. Recently in Nature, Luo et al. successfully synthesized a freestanding 4-atomic-thick PdMo bimetallene and demonstrated a record electrocatalytic oxygen reduction reaction activity in alkaline electrolyte. We conclude that this bimetallene will provide an ideal model to investigate the active-site catalytic-activity relationship and to optimize electrocatalytic performance at the atomic level. Future synthesis of noble-metal-free metallene (e.g., Fe, Co, Ni, Cu, and Mo) is anticipated. Electrocatalysis drives efficient inter-conversion of electricity and chemicals. It is a cornerstone of many renewable energy technologies and sustainable syntheses of fuels. In order to improve electrocatalytic performance and promote practical application, research is being directed toward the development of new electrocatalysts over and beyond precious metals like platinum, iridium, and ruthenium. Following the isolation of the first two-dimensional (2D) atomic crystal, graphene, the number of 2D atomically thin materials has experienced a boom.1Deng D. Novoselov K.S. Fu Q. Zheng N. Tian Z. Bao X. Catalysis with two-dimensional materials and their heterostructures.Nat. Nanotechnol. 2016; 11: 218-230Crossref PubMed Scopus (1542) Google Scholar, 2Jin H. Guo C. Liu X. Liu J. Vasileff A. Jiao Y. Zheng Y. Qiao S.Z. Emerging two-dimensional nanomaterials for electrocatalysis.Chem. Rev. 2018; 118: 6337-6408Crossref PubMed Scopus (1216) Google Scholar, 3Sun Y. Gao S. Lei F. Xie Y. Atomically-thin two-dimensional sheets for understanding active sites in catalysis.Chem. Soc. Rev. 2015; 44: 623-636Crossref Google Scholar Their development has undergone three generations, from (1) metal-free including graphene, graphitic carbon nitride, phosphorene, etc., to (2) transition metal compounds including chalcogenides, carbides, hydroxides, etc., and to (3) metallic materials (Figure 1). Many 2D metal-free and transition-metal compounds exhibit a layered structure stacked by van der Waals forces and can be fabricated via top-down exfoliation or bottom-up growth, as thin as 1 atomic layer. However, others are intrinsically non-layered and are therefore not favored thermodynamically to form a 2D atomically thin morphology. Indeed, the majority of metal nanomaterials are closely packed and highly symmetrical crystal structures (face-centered cubic or hexagonal closest packed) because of the strong and isotropic nature of metallic bonds. This makes it a significant challenge to prepare actual, 2D atomically thin metallic materials.4Chen Y. Fan Z. Zhang Z. Niu W. Li C. Yang N. Chen B. Zhang H. Two-dimensional metal nanomaterials: synthesis, properties, and applications.Chem. Rev. 2018; 118: 6409-6455Crossref PubMed Scopus (539) Google Scholar Recently, a number of metallic nanosheets less than 10 atomic layers thick have been synthesized.5Huang X. Tang S. Mu X. Dai Y. Chen G. Zhou Z. Ruan F. Yang Z. Zheng N. Freestanding palladium nanosheets with plasmonic and catalytic properties.Nat. Nanotechnol. 2011; 6: 28-32Crossref PubMed Scopus (1279) Google Scholar, 6Duan H. Yan N. Yu R. Chang C.R. Zhou G. Hu H.S. Rong H. Niu Z. Mao J. Asakura H. et al.Ultrathin rhodium nanosheets.Nat. Commun. 2014; 5: 3093Crossref PubMed Scopus (373) Google Scholar, 7Gao S. Lin Y. Jiao X. Sun Y. Luo Q. Zhang W. Li D. Yang J. Xie Y. Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel.Nature. 2016; 529: 68-71Crossref PubMed Scopus (1298) Google Scholar, 8Saleem F. Xu B. Ni B. Liu H. Nosheen F. Li H. Wang X. Atomically thick Pt-Cu nanosheets: self-assembled sandwich and nanoring-like structures.Adv. Mater. 2015; 27: 2013-2018Crossref Scopus (98) Google Scholar, 9Yang N. Zhang Z. Chen B. Huang Y. Chen J. Lai Z. Chen Y. Sindoro M. Wang A.L. Cheng H. et al.Synthesis of ultrathin PdCu alloy nanosheets used as a highly efficient electrocatalyst for formic acid oxidation.Adv. Mater. 2017; 29: 1700769Crossref Scopus (200) Google Scholar These findings, together with superior properties, point to the practical possibility of 2D atomically thin metals. In 2011, Huang et al. achieved a breakthrough when they reported the facile synthesis of freestanding 10-atomic-layer, hexagonal palladium nanosheets via a general carbon monoxide (CO)-confined growth method.5Huang X. Tang S. Mu X. Dai Y. Chen G. Zhou Z. Ruan F. Yang Z. Zheng N. Freestanding palladium nanosheets with plasmonic and catalytic properties.Nat. Nanotechnol. 2011; 6: 28-32Crossref PubMed Scopus (1279) Google Scholar With the assistance of poly(vinylpyrrolidone) (PVP), Li and co-workers reported the fabrication of single-layered rhodium nanosheets in high yield; these nanosheets were stabilized by PVP ligands.6Duan H. Yan N. Yu R. Chang C.R. Zhou G. Hu H.S. Rong H. Niu Z. Mao J. Asakura H. et al.Ultrathin rhodium nanosheets.Nat. Commun. 2014; 5: 3093Crossref PubMed Scopus (373) Google Scholar These authors proposed defining a single-layered metal nanosheet as “metallene,” based on an analogy with graphene.6Duan H. Yan N. Yu R. Chang C.R. Zhou G. Hu H.S. Rong H. Niu Z. Mao J. Asakura H. et al.Ultrathin rhodium nanosheets.Nat. Commun. 2014; 5: 3093Crossref PubMed Scopus (373) Google Scholar In addition to 2D noble metals, Xie and colleagues reported synthesis of freestanding 4-atomic-thick cobalt nanosheets using n-butylamine as the capping ligand and dimethylformamide as a reducing agent.7Gao S. Lin Y. Jiao X. Sun Y. Luo Q. Zhang W. Li D. Yang J. Xie Y. Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel.Nature. 2016; 529: 68-71Crossref PubMed Scopus (1298) Google Scholar Generally, the bottom-up growth of 2D atomically thin metals is assisted by organic ligands, or, is mediated by small molecules and ions.4Chen Y. Fan Z. Zhang Z. Niu W. Li C. Yang N. Chen B. Zhang H. Two-dimensional metal nanomaterials: synthesis, properties, and applications.Chem. Rev. 2018; 118: 6409-6455Crossref PubMed Scopus (539) Google Scholar Despite these advances, both synthesis methods and metal compositions are limited and hold back the development and application of metallene. Recently, as reported in Nature,10Luo M. Zhao Z. Zhang Y. Sun Y. Xing Y. Lv F. Yang Y. Zhang X. Hwang S. Qin Y. et al.PdMo bimetallene for oxygen reduction catalysis.Nature. 2019; 574: 81-85Crossref Scopus (581) Google Scholar Luo et al. successfully synthesized a freestanding 4-atomic-thick palladium-molybdenum (PdMo) bimetallene. This bimetallene exhibited record oxygen reduction reaction (ORR) activity, significant stability in alkaline electrolyte, and a practical promise as a cathode in Zn-air and Li-air batteries. The obtained PdMo alloy was in the form of a highly curved nanosheet with an average lateral size of around 100 nm and an average thickness of 0.88 nm. It is noteworthy that the authors succeeded in controlling the anisotropic 2D growth kinetics of metals toward sub-nanometer nanosheets without the assistance of polymer surfactants that are detrimental to electrocatalysis because the surfactants can block active sites. They confirmed that the metal carbonyl precursor (molybdenum hexacarbonyl) was essential to the favorable formation of the 2D atomically thin structure because of the strong adsorption of in situ-released CO ligands on the basal (111) planes of Pd nanosheets. Additionally, the use of a moderately reducing environment (ascorbic acid) was crucial for slow incorporation of molybdenum atoms. It is widely known that electrocatalytic activity is strongly dependent on both intrinsic electronic structure and extrinsic physical properties. The 2D atomically thin bimetallene in this work demonstrated a comprehensive engineering of electrocatalysts—atom utilization, alloy effect, strain effect, and quantum size effect—for dramatically enhanced performance. The incorporation of molybdenum (12.2 wt %) inside the bimetallene, the tensile strain (1.4%) derived from the curved geometry and alloying, and the quantum size effect from the sub-nanometer thinness intrinsically tuned the electronic structure with a beneficial downshift of the d-band center. It optimized oxygen binding on the surface. Extrinsically, the 4-atomic-layer thickness gave a significant electrochemical active surface area of 138.7 m2 gPd–1 and a high atomic utilization >0.5. Therefore, this novel alloy nanosheet exhibited highly significant activity and stability for ORR in alkaline electrolytes. The mass activity achieved at 0.9 V versus the reversible hydrogen electrode was 16.37 A mgPd–1—78 times and 327 times greater than those for commercial Pt/C and Pd/C, respectively—and showed only slight decay after 30,000 cycles. We therefore conclude that bimetallene provides an ideal model to investigate the active-site catalytic-activity relationship and to optimize electrocatalytic performance at the atomic level. Despite this obvious breakthrough in the research of 2D materials, significant effort is required to understand the nature of the stability of metallene, as well as its precise growth mechanism and electronic structure. Future synthesis of noble-metal-free metallene (e.g., iron, cobalt, nickel, copper, and molybdenum) is now anticipated. It is expected that various engineering strategies will be implemented to tune electronic structure for targeted applications, such as inter- and intra-layer heterostructures, size and thickness, heteroatom doping, and defect engineering. With this in-depth understanding and improved regulation of metallene, it is expected that new opportunities for theoretical research, fundamental study, and practical applications will become available.