Abstract:Activated carbon (AC) supported Cu catalysts are employed to study the influence of surface oxygenated groups on the formation of active Cu species and the catalytic activity of Cu/AC catalyst for oxidative carbonylation of methanol to dimethyl carbonate (DMC). The AC supports are thermal treated under different temperatures in order to adjust the levels of surface oxygenated groups. The AC supports are characterized by BET, TAD-MS and XRD, and the Cu/AC catalysts are characterized by BET, XRD, TEM, XPS, AAS, CH3OH-TPD and N2O chemisorption. The results show that as the treatment temperature is below 800 degrees C,the BET surface area of the corresponding AC supports are nearly unchanged and close to that of the original AC (1529.6 m(2)/g). But as the thermal treatment temperature is elevated from 1000 to 1600 degrees C, the BET surface area of AC supports gradually decreases from 1407.6 to 972.2 m(2)/g. After loading of Cu, the BET surface area of copper catalysts is in the range of 834.4 to 1545.3 m(2)/g, which is slightly less than that of the respective supports. When AC is thermal treated at 400 and 600 degrees C, the unstable carboxylic acid and anhydrides groups are selectively removed, which has weakened the mobility and agglomeration of Cu species during the calcination process, and thus improve the Cu species dispersion over AC support. But as the treatment temperature is elevated from 600 degrees C to 1200 degrees C, the Cu species dispersion begins to decline suggesting further removal of stable surface oxygenated groups is unfavorable for Cu species dispersion. Moreover, higher thermal treatment temperature (above 1200 degrees C) promotes the graphitization degree of AC and leds to the decrease of Cu loading on AC support. Meanwhile, the removal of surface oxygenated groups by thermal treatment is conducive to the formation of more pi-sites, and thus promote the reduction of Cu2+ to Cu+ and Cu-0 as active centers. The specific surface area of (Cu+ + Cu-0) is improved by thermal treatment of AC, however, the space time yield of DMC on unit specific surface area of (Cu+ + Cu-0) is in the range of 23.1-49.1 mg h(-1) m(-2), which is much less than that (77.6 mg h(-1) m(-2)) of the original catalyst. The possible reason is that the removal of surface oxygenated groups results in AC support transforms from hydrophilicity to hydrophobicity, which is detrimental for the adsorption of CH3OH resulting in the decreased local concentration of CH3OH on active Cu species. (C) 2016 Elsevier B.V. All rights reserved.

The Influence of the Pore Structure in Ordered Mesoporous Carbon over the Formation of Cu Species and Their Catalytic Activity Towards the Methanol Oxidative Carbonylation

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Effect of Cu Location and Dispersion on Carbon Sphere Supported Cu Catalysts for Oxidative Carbonylation of Methanol to Dimethyl Carbonate

Effect of Carbon Support on the Catalytic Performance of Cu-based Nanoparticles for Oxidative Carbonylation of Methanol

Highly active catalysis of methanol oxidative carbonylation over nano Cu2O supported on micropore-rich mesoporous carbon

Cu Nanoparticles Encapsulated with Hollow Carbon Spheres for Methanol Oxidative Carbonylation: Tuning of the Catalytic Properties by Particle Size Control

Carbon nanotube-supported Cu-based catalysts for oxidative carbonylation of methanol to methyl carbonate: effect of nanotube pore size

Influence of Structure Evolution of CuY Catalyst During the Reaction Process on Its Catalytic Performance for Oxidative Carbonylation of Methanol

Ordered mesoporous carbons (OMCs) as supports of electrocatalysts for direct methanol fuel cells (DMFCs): Effect of the pore characteristics of OMCs on DMFCs

Influence of Mesoporous Modulation on CuY Catalyst for Oxidative Carbonylation of Methanol

Textural Structure Effect Of Sio2 On The Catalytic Performance For Hydrogenation Of Dimethyl Oxalate To Ethylene Glycol Over Different Cu-Based Catalysts

Hierarchical Porous Carbon-Supported Copper Nanoparticles As an Efficient Catalyst for the Dimethyl Carbonate Synthesis

Mechanistic Study Of Pd-Cu Bimetallic Catalysts For Methanol Synthesis From Co2 Hydrogenation

The confinement effects of ordered mesoporous carbon on copper nanoparticles for methanol oxidative carbonylation

Structural feature and catalytic performance of Cu―SiO2―TiO2 cogelled xerogel catalysts for oxidative carbonylation of methanol to dimethyl carbonate

Highly Dispersed Cu Supported on Mesoporous Al‐KIT‐6 for Oxidative Carbonylation of Methanol to Dimethyl Carbonate

Influence of Surface Oxygenated Groups on the Formation of Active Cu Species and the Catalytic Activity of Cu/AC Catalyst for the Synthesis of Dimethyl Carbonate

Influence of Oxygen-Containing Groups of Activated Carbon Aerogels on Copper/activated Carbon Aerogels Catalyst and Synthesis of Dimethyl Carbonate

Active Sites and Structure–Activity Relationships of Copper-Based Catalysts for Carbon Dioxide Hydrogenation to Methanol

Surface Structure and Catalytic Performance of Cucl/Sio2-Al2o3 Catalysts for Methanol Oxidative Carbonylation

Metal and Metal Oxide Supported on Ordered Mesoporous Carbon as Heterogeneous Catalysts