Abstract:A composite titania thin film consisted of quasi-aligned single-crystalline rutile nanorods embedded in sol-gel-derived anatase aggregates was fabricated and its photoelectrochemical behavior was studied in detail. A monolayer of nearly sing I e-crystal line rutile nanorods was first deposited on metallic Ti substrates through a controlled reaction between Ti and hydrogen peroxide. The gaps among the rutile nanorods were then filled with titania nanoparticles through a sol-gel dip-coating approach, which achieved a composite thin film of single-crystalline rutile nanorods embedded in anatase aggregates, after a subsequent thermal treatment at 723 K. The X-ray diffraction measurement revealed that the composite film with thickness of 180 nm contained anatase and rutile in a nearly 50:50 ratio. The UV-visible diffusive reflectance spectra estimated a band gap of 2.99 eV for the rutile monolayer and a slightly increased value of 3.03 eV for the composite film due to the embedding of the anatase nanoparticles. Photocurrent versus potential diagrams, photocurrent transient curves, and open-circuit potential measurement supported the fact that the anatase nanoparticles possessed better inherent photoelectrochemical properties than rutile. However, electrochemical impedance spectra characterization, together with photocurrent transient curves and open-circuit potential measurement, suggests that the single-crystalline rutile nanorods exhibited a higher electron-transfer rate. The combination of the two components in such an appropriate way enhanced significantly the charge separation effect arising from the anatase/rutile couple, which hence combined efficiently the "mixed crystal effect" and the "mixed morphological effect". A steady-state photocurrent more than double the simple sum of those generated by the two components alone was detected for the current composite film, which can be attributed to the single-crystalline rutile nanorods that provide channels for rapid electron transfer to the conductive Ti substrates under an applied bias potential. As a result, this study concludes that the present nanostructure magnified significantly the well-established mixed crystal effect, that is, an enhanced charge separation arising from a mixture of anatase and rutile.

Self-assembly and photoelectric properties of cerium complexes with 3, 4, 9, 10-perylenetetracarboxylic acid on nanocrystalline TiO 2 films

Alternative Self-Assembled Films Of Metal-Ion-Bridged 3,4,9,10-Perylenetetracarboxylic Acid On Nanostructured Tio2 Electrodes And Their Photoelectrochemical Properties

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Multi-layered Mesoporous TiO2thin Films with Large Pores and Highly Crystalline Frameworks for Efficient Photoelectrochemical Conversion

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Enhanced Photoelectrochemical Response of a Composite Titania Thin Film with Single-Crystalline Rutile Nanorods Embedded in Anatase Aggregates

Novel photoactive self-assembled rigid monolayer of a perylene derivative: fabrication and characterization

Photoelectric Conversion Properties of Nanocrystalline Tio2 Electrodes Sensitized with Hemicyanine Derivatives

Enhanced Photocatalytic Performance of TiO2@CeO2 Hollow Structure through Synergetic Surface and Interface Engineering

Preparation and Electrochromic Study of Ce3+ Doped TiO2 Thin Films

A ternary organic electron transport layer for efficient and photostable perovskite solar cells under full spectrum illumination

Exploring the Enhancement of Photocatalytic Performance in TiO2 Based Hollow Composites: Size Effect of the Adsorbed CeO2 Particles

CdSe Quantum Dot-Sensitized Au/TiO2 Hybrid Mesoporous Films and Their Enhanced Photoelectrochemical Performance

Perylene Derivative Based Self-Assembled Monolayer on Ito Electrode Surfaces

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Big-leaf hydrangea-like Bi2S3-BiOBr sensitized TiO2 nanotube arrays with enhanced photoelectrocatalytic performance

Cerium-doped mesoporous BaTiO3/TiO2 nanocomposites: structural, optical and photocatalytic properties

24.8%-efficient planar perovskite solar cells via ligand-engineered TiO2 deposition

Monodentate versus Bidentate Anchoring Groups in Self-Assembling Molecules (SAMs) for Robust p-i-n Perovskite Solar Cells

Reconfiguration toward Self‐Assembled Monolayer Passivation for High‐Performance Perovskite Solar Cells

Novel cerium-based MOFs photocatalyst for photocarrier collaborative performance under visible light