Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

A Novel Construct to Perform In Situ Deformation Measurements of Material Extrusion-Fabricated Structures

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

A novel experimental method for in situ strain measurement during selective laser melting

Process-Structure Coupled Simulation of Additive Manufactured Components

Operando neutron diffraction reveals mechanisms for controlled strain evolution in 3D printing

By Visualizing the Deformation with Mechanoluminescent Particles, Additive Manufacturing Offers a Practical Alternative to Stress and Strain Simulation

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

In-situ Monitoring and Deformation Characterization by Optical Techniques; Part I: Laser-aided Direct Metal Deposition for Additive Manufacturing

Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling

Experimental Examination of Additively Manufactured Patterns on Structural Nuclear Materials for Digital Image Correlation Strain Measurements

The Full-Field Strain Distribution and the Evolution Behavior During Additive Manufacturing Through In-Situ Observation

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene

In situ measurements and simulation of residual stresses and deformations in additively manufactured thin plates

In situ X-ray diffraction and thermal simulation of material extrusion additive manufacturing of polymer

Insights into fundamental deformation processes from advanced in situ transmission electron microscopy

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

In Situ Investigation of Tensile Response for Inconel 718 Micro-Architected Materials Fabricated by Selective Laser Melting

Tomographic eigenstrain reconstruction for full-field residual stress analysis in large scale additive manufacturing parts

Numerical investigation of residual stresses in thin-walled additively manufactured structures from selective laser melting

A Nanomechanical Testing Framework Yielding Front&Rear-Sided, High-Resolution, Microstructure-Correlated SEM-DIC Strain Fields

Strain incompatibility as a source of residual stress in welding and additive manufacturing