Abstract:Continuous carbon fiber (CF)-reinforced poly (ether ether ketone) (PEEK) composites have excellent mechanical properties, but their processing techniques are limited. Therefore, we promoted a braiding method based on the hybrid fiber method by hot-compacting CF/PEEK plain weave fabrics to solve the problem of difficult wetting between CF and PEEK. Four parameters—melting temperature, molding pressure, crystallization temperature and the resin contents—were investigated for optimized fabrication. After studying the melting range, thermal stability and the contact angle of PEEK under different temperatures, the melting temperature was set at 370 °C. An ultra-depth-of-field 3D microscope was adopted to investigate the effects of molding pressure in the melting stage. The tensile strength or modulus along and perpendicular to the carbon fiber direction and crystallinity under different crystallization temperatures were analyzed. As a result, the sample crystalized at 300 °C showed an excellent tensile properties and crystallinity. The increased mass ratio of PEEK ranging from 50.45% to 59.07% allowed for much stronger interfacial strength; however, the higher resin content can lead to the dispersion of CFs, loss of resin and the formation of defects during processing. Finally, the optimal resin mass content was 59.07%, with a tensile strength of 738.36 ± 14.49 MPa and a flexural strength of 659.68 ± 57.53 MPa. This paper studied the optimized processing parameters to obtain better properties from CF/PEEK plain weave fabrics and to further broaden the specific applications of CF/PEEK composites, demonstrating a new direction for its fabrication.

Bending Behavior of Porous Sintered Stainless Steel Fiber Honeycombs

The Shear Properties and Deformation Mechanisms of Porous Metal Fiber Sintered Sheets

The Neck to Particle Ratio Effect on the Mechanical and Morphological Sintering Features of Porous Stainless Steel (SS) Hollow Fibers

Preparation and characterization of permeability and mechanical properties of three-dimensional porous stainless steel

The Mechanical Behavior of Porous Metal Fiber Sintered Sheets

Meta-honeycomb sandwich tubes: Designing, manufacturing, and crashworthiness performance

Effect of porosity on mechanical properties of porous tantalum scaffolds produced by electron beam powder bed fusion

Bending response and energy absorption of sandwich beams with combined reinforced auxetic honeycomb core

Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting

Failure analysis of brazed sandwich structures with square honeycomb-corrugation hybrid cores under three-point bending

Performance of CFDST Beams Using High-Strength Steel under Bending

A Combined Investigation of Bending Behavior of a SiC Fiber‐Reinforced Titanium Matrix Composite with Compressive and Tensile Tests

Path Planning and Bending Behaviors of 3D Printed Continuous Carbon Fiber Reinforced Polymer Honeycomb Structures

The Compressive Behavior of Porous TC4 Alloy Scaffolds Manufactured by Selective Laser Melting

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

The Effect of Porosity on the Mechanical Property of Metal-Bonded Diamond Grinding Wheel Fabricated by Selective Laser Melting (SLM)

An Investigation on Mechanical Behavior of Tooth-Plate-Glass-Fiber Hybrid Sandwich Beams

Interfacial strengthening mechanism of SS/CFRTP/SS composite components prepared by mixed co-punch

Bending behaviors of 3D printed sandwich structures with functionally graded porous lattice cores