Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Combustion Kinetic Behavior of Different Ash Contents Coals Co-Firing with Biomass and the Interaction Analysis

Co-Firing Behaviors and Kinetics of Different Coals and Biomass

Experiment and Kinetics Studies on Ash Fusion Characteristics of Biomass/Coal Mixtures During Combustion

Experimental Study on Interaction and Kinetic Characteristics During Combustion of Blended Coals

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Experimental Study of the Influence of Synergistic Effects on the Co-Firing Characteristics of Biomass and Coal

Combustion and Heat Transfer Characteristics of Co-Firing Biomass and Coal under Oxy-Fuel Condition

Investigation on the co-combustion characteristics of multiple biomass and coal under O2/CO2 condition and the interaction between different biomass.

Co-Combustion Characteristics of Typical Biomass and Coal Blends by Thermogravimetric Analysis

Experimental study on co-firing characteristics of coal/biomass blends in O2/CO2 atmosphere

Co-combustion of Bituminous Coal and Biomass Fuel Blends: Thermochemical Characterization, Potential Utilization and Environmental Advantage.

Thermodynamics and synergistic effects on the co-combustion of coal and biomass blends

Combustion interactions in oxy-fuel firing of coal blends: An experimental and numerical study

Thermal behavior and kinetic analysis of co-combustion of waste biomass/low rank coal blends

Study of the Kinetic Behaviour of Biomass and Coal During Oxyfuel Co-Combustion

Effect of different conditions on the combustion interactions of blended coals in O 2 /CO 2 mixtures

Combustion characteristics and kinetic analysis of biomass charanthracite coal blends

A Comparison of Combustion Properties in Biomass–Coal Blends Using Characteristic and Kinetic Analyses

Experiment and Expectation: Co-combustion Behavior of Anthracite and Biomass Char.

The Combustion of Forest Humus Blended with Low-Rank Coal: Effects of Oxygen Ratio and Blending Ratio

A Study on Coal Properties and Combustion Characteristics of Blended Coals in Northwestern China