Abstract:Surface integrity has a significant impact on the performance and life cycle of the blisk blade. Residual stress, as one of the important characterization parameters of surface integrity, is closely related to the performance of the aeroengine blisk blade. A certain interval of residual compressive stress can significantly inhibit the generation of microcracks. This paper proposes an optimization method of polishing process parameter interval based on sensitivity analysis. This research studied the effect of polishing parameters of the alumina ACW (abrasive cloth wheel) on the surface residual stress of the GH4169 superalloy blisk blade. Firstly, the experiment was designed by four factors and three levels response surface method, the multiple regression of the experimental data based on Minitab software was used to get a prediction model of polished surface residual stress. And an analysis of variance was performed on the model. Subsequently, the model of relative sensitivity was got based on this model. The sensitivity order of polishing surface residual stress to each polishing parameter was obtained. And the judging method of stable interval and instable interval was put forward. Then, a parameter interval optimization method was proposed, and the optimal interval of process parameters was obtained. Finally, a polishing verification experiment was performed. The results show that: for the polishing of GH4169 superalloy blades, the surface residual stress is most sensitive to the feed rate vf of the ACW, followed by the granularity p and the rotation rate ω, and the compression depth ap is the least sensitive. The optimal interval of polishing process parameters is: the rotation rate ω is [11000 r/min, 11500 r/min], the feed rate vf is [100 mm/min, 200 mm/min], the compression depth ap is [0.6 mm, 1.0 mm], and the granularity p is [400 #, 600 #]. The optimized polishing process parameters can obtain a large and stable surface residual compressive stress, which is helpful to increase fatigue strength of the blisk blade.

Sensitivity of Surface Roughness to Flexible Polishing Parameters of Abrasive Cloth Wheel and Their Optimal Intervals

Prediction of Surface Roughness Ratio of Polishing Blade of Abrasive Cloth Wheel and Optimization of Processing Parameters

Optimal parameter ranges of material removal depth of abrasive cloth wheel polishing based on sensitivity analysis

Experimental analysis and modeling for CNC polishing force of abrasive cloth flap wheel

Analysis and Optimization of Process Parameter Intervals for Surface Quality in Polishing Ti-6Al-4V Blisk Blade

Modeling of Tool Influence Function for the Abrasive Cloth Flap Wheel and Optimization of Polishing Path Spacing and Feed Rate

Modeling and Parameter Optimization of Flexible NC Polishing Vibration of Abrasive Cloth Wheel Based on Sensitivity Analysis

Evaluation and Improvement of Material Removal Rate with Good Surface Quality in TC4 Blisk Blade Polishing Process

Polishing surface integrity of TC17 aeroengine blades

Geometric Characteristic Modeling for Flexible Contact of Sanding Wheel–polished Complex Surface

Microscopic morphology modeling and prediction of flexible polished surface with belt flapwheel

Forward Polishing Process Planning of Aero-Engine Blisk Blade

Parameter Optimization of Five-Axis Polishing Using Abrasive Belt Flap Wheel for Blisk Blade

ENHANCED MATERIAL REMOVAL RATE AND SURFACE QUALITY IN Ti-6Al-4V BLISK BLADE POLISHING BY GRA-RBF-FA METHOD

Process parameters optimization of flap wheel polishing in leading and trailing edges of blade

Surface Generation Mechanism and Experimental Investigation of Ultrasonic Vibration Assisted Belt Flapwheel Flexible Polishing Process

Optimization of Abrasive Flow Polishing Process Parameters for Static Blade Ring Based on Response Surface Methodology

Experimental Study of the Correlation of Flexible Abrasive Grinding Parameters

A profile-adaptive compliant polishing tool for aero-engine blade finishing process

Sensitivity analysis and parameter interval optimization for residual stress in polishing process of GH4169 blisk blade

Effect of relative feeding direction on surface texture in abrasive cloth flap wheel polishing process