Numerical Investigation of Vortex-Induced Vibrational Responses to a Flexible Tensioned Riser with Symmetric Grooves in Uniform Currents
Hao Hu,Zhi Pan,Weiwen Zhao,Decheng Wan
DOI: https://doi.org/10.1016/j.oceaneng.2023.113780
IF: 5
2023-01-01
Ocean Engineering
Abstract:The vortex-induced vibration (VIV) responses to a flexible tensioned cylindrical riser, which the cross section is fixed with two symmetric grooves, is numerically researched by the inhouse viv3D-FOAM-SJTU solver developed based on the OpenFOAM and thick strip model. The Reynolds-averaged Navier-Stokes (RANS) method and Euler-Bernoulli bending beam model are coupled to obtain the hydrodynamics forces and displacements in the vibration process of riser exposed to uniform current. The configurations of riser are designed to spanwise grooves with three different angles (45 degrees,90 degrees, 135 degrees) to the incoming flow, and the three different groove depths and four flow velocities are selected for further investigation. Results show that the flow is broken in the groove, forming the internal small vortices, when the groove degree is 45 degrees, the complex VIV responses are generated due to the change of flow separation point and the interference of internal small vortices on the development of large-scale vortices on the surface of the riser. As the groove degree reaches to 90 degrees, the interference of internal small vortices leads to VIV suppression, and the internal small vortices is released directly into the wake field to enhance VIV with the groove degree = 135 degrees. As the depth of the groove increases, the effect on the flow field is also enhanced, and the vortex structure along the span of the flow field is affected by the position and depth of the groove. Therefore, the geometries of the groove degree = 90 degrees and depths = 0.12D, 0.16D (D is the riser diameter) present the best VIV suppression effect, and the configurations of two other groove degrees are failed to suppress the VIV well.