Abstract:In order to expand the applications of cold-formed thin-walled steel structures, this study proposes a new type of composite wallboard composed of cold-formed thin-walled C-shaped steel and multi-layer concrete, in which C-shaped steel serves as the skeleton, foam concrete acts as the thermal insulation material, and fine aggregate concrete and cement mortar play the part of envelopes. The composite wallboard can be made in a factory assembly line, meeting the requirements of the building (civil and structural) industry. Two steel-frame composite wallboard shear walls were subjected to reciprocating loading, with the connection mode as the design parameter, to investigate the seismic performance of the structure. The failure mode, hysteresis curve, skeleton curve, strength degradation, stiffness degradation, ductility, and energy dissipation capacity of the specimens were analyzed. On this basis, the finite element (FE) model of the steel-frame composite wallboard was established, and the model's accuracy was verified by comparing the bearing capacity and the skeleton curve. Results show that the structure shows shear failure characteristics, and the cement mortar layer and the fine aggregate concrete layer are separated from the C-shaped steel after being crushed. The infilled foam concrete is also crushed, and the welding seams between the extended C-shaped steel and steel frame of the WP-1 specimen are damaged. The hysteresis curves of the two specimens have a clear pinch, but the area enclosed by the hysteresis loop is large, and the energy dissipation capacity is also present. The yield load and ultimate load of the WP-2 specimen are higher than those of the WP-1 specimen, indicating that the higher the connection strength between the composite wallboard and the steel frame, the greater the ultimate carrying capacity of the specimen. The established FE model can accurately estimate the seismic performance of steel-frame composite wallboard shear walls.

STUDY ON THE MECHANICAL PERFORMANCE OF LIGHT WALL PANEL UNDER HORIZONTAL DISPLACEMENT

Mechanical Performance of Prefabricated External Wall Panel under Horizontal Displacement

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

LATERAL RESISTANCE OF LIGHTWEIGHT WOOD AND BAMBOO SHEAR WALLS

ELASTIC BUCKLING OF STIFFENED STEEL PLATE SHEAR WALL IN SHEAR

EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF MODULAR COMPOSITE SHEAR WALL WITH DOUBLE STEEL PLATES AND INFILL CONCRETE

Mechanical behavior test and analysis of HEH sandwich external wall panel

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Mechanical performance of prefabricated lightweight steel-foamed ceramsite concrete wall panels: Experimental and theoretical investigations

Experimental Study on Mechanical Property of a New Type of Sandwich Wall

Mechanical property test and numerical analysis of a novel precast shear wall

Experimental Research on Shear Performance of Reinforced Block Short-Leg Masonry Shear Wall

Experiment study of tensile capacity of metal rock wool sandwich wall panel connection

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall

ANALYSIS ON MECHANICAL PERFORMANCE OF STEEL FRAME INFILLED WITH MASONRY PANEL

Influence of Various Earth-Retaining Walls on the Dynamic Response Comparison Based on 3D Modeling

Mechanical Behavior of the Reinforced Retaining Wall Subjected to Static Load

Experimental Study on the Mechanical Properties of Horizontally Bolted Joints of Prefabricated Shear Walls