Abstract:In this paper, the substitution of different amounts of Zr for Ti in the hydrogen storage electrode alloy Mg35Ti10Ni55 has been carried out for the purpose of further improving the electrochemical performance of the electrode alloy. The electrochemical properties were tested on the purposely prepared Mg35Ti10−xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys. The results showed that all alloys substituted with Zr possessed a higher cycling capacity retention and a larger initial discharge capacity (except Mg35Ti1Zr9Ni55) than the original alloy Mg35Ti10Ni55. Among these alloys Mg35Ti5Zr5Ni55 exhibited the highest discharge capacity and cycling stability. It was found from X-ray Photoelectron Spectroscopy (XPS) surface analysis that the Zr content reduced the degree of oxidation of Mg. The higher the Zr content, the lower is the degree of oxidation of Mg. Auger electron spectroscopy (AES) analysis revealed that the thickness of the passive oxide film coating on the alloy surfaces became first reduced as the Zr content increased but subsequently became augmented as the Zr content exceeded 5 at.%. The study indicated that the corrosion inhibiting effect of Zr alone, without the presence of Ti was weak. The synergetic effect of Zr and Ti made the passive film more compact, less pervious and more protective than by Ti or Zr alone. The thickness of the passive film agreed well with the polarization resistance of the alloys obtained from electrochemical impedance spectroscopy (EIS) Nyquist diagrams, suggesting that the surface polarization resistance RP being closely related to the film thickness and the exchange current density on the surface of the alloy varied accordingly. The conclusion of this study is that 5 at.% Zr substitution in Mg35Ti10Ni55 leads to the formation on the surface of a good and thin passive film, which retards the corrosion of the alloy and at the same time leads to the least polarization resistance and highest exchange current in this series of alloys studied.

Investigation on the Passive Behavior of Ti-9Mn Alloy in 3.5 wt% NaCl Solution

Corrosion behavior and electrochemical properties of carbon steel, commercial pure titanium, copper and copper–aluminum–nickel alloy in 3.5% sodium chloride containing sulfide ions

The effect of partial substitution of Zr for Ti on the electrochemical properties and surface passivation film of Mg35Ti10 - xZrxNi55 (x=1, 3, 5, 7, 9) electrode alloys

The electrochemical behavior of a Ti50Ni47Fe3 shape memory alloy

Corrosion Behavior of Titanium Alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V y Ti Beta-C) with Anodized and Exposed in NaCl and H2SO4 Solutions

The Role of Ti in Cavitation Erosion and Corrosion Behaviours of NAB Alloy in 3.5 % NaCl Solution

Corrosion Behaviour of Ti–Nb–Sn Shape Memory Alloys in Different Simulated Body Solutions

Electrochemical Performance of Passive Film Formed on Ti–Al–Nb–Zr Alloy in Simulated Deep Sea Environments

Effects Of Hf Content And Immersion Time On Electrochemical Behavior Of Biomedical Ti-22nb-Xhf Alloys In 0.9% Nacl Solution

Investigation of Microstructure, Mechanics, and Corrosion Properties of Ti6Al4V Alloy in Different Solutions

Surface corrosion enhancement of passive films on NiTi shape memory alloy in different solutions

Effects of Hf content and immersion time on electrochemical behavior of biomedical Ti-22Nb-<i>x</i> Hf alloys in 0.9% NaCl solution

Corrosion Behaviour and Biocompatibility Evaluation of Low Modulus Ti–16Nb Shape Memory Alloy As Potential Biomaterial

The anisotropy of corrosion and passive behavior in selective laser melted Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Electrochemical Corrosion Behaviour of Ti44Ni47Nb9 Alloy in Simulated Body Fluids

Salt spray corrosion behavior and pitting resistance of Ti-15 V-3Cr-3Al-3Sn alloy evaluated using XPS, SKPFM, and electrochemical technique

Anodic electrochemical behaviors of in situ synthesized (TiB+TiC)/Ti6Al4V composites in NaNO 3 and NaCl electrolyte

The effect of Mn addition on corrosion behaviour of equiatomic CoCrFeNi high entropy alloys in NaCl solution

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium

Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy

(Digital Presentation) Corrosion-Resistance Investigation of Titanium Passive Layer in Acidic Solution