Abstract:Accurate and efficient structural health monitoring of infrastructure objects such as bridges is a vital task, as many existing constructions have already reached or are approaching their planned service life. In this contribution, we address the question of the suitability of UAV-based monitoring for SHM, in particular focusing on the geometric deformation under load. Such an advanced technology is becoming increasingly popular due to its ability to decrease the cost and risk of tedious traditional inspection methods. To this end, we performed extensive tests employing a research reinforced concrete bridge that can be exposed to a predefined load via ground anchors. Very high-resolution image blocks have been captured before, during, and after the application of controlled loads. From those images, the motion of distinct points on the bridge has been monitored, and in addition, dense image point clouds were computed to evaluate the performance of surface-based data acquisition. Moreover, a geodetic control network in stable regions is used as control information for bundle adjustment. We applied different sensing technologies in order to be able to judge the image-based deformation results: displacement transducers, tachymetry, and laser profiling. As a platform for the photogrammetric measurements, a multi-rotor UAV DJI Matrice 600 Pro was employed, equipped with two RTK-GNSS receivers. The mounted camera was a PhaseOne iXM-100 (100MP) with an 80 mm lens. With a flying height of 30 m above the terrain, this resulted in a GSD of 1.3 mm while a forward and sideward overlap of 80% was maintained. The comparison with reference data (displacement transducers) reveals a difference of less than 1 mm. We show that by employing the introduced UAV-based monitoring approach, a full area-wide quantification of deformation is possible in contrast to classical point or profile measurements.

A DIC-UAV based displacement measurement technique for bridge field testing

Rapid Seismic Risk Assessment of Bridges Using UAV Aerial Photogrammetry

Crack Detection and Quantification for Concrete Structures Using UAV and Transformer

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Drone-based displacement measurement of infrastructures utilizing phase information

Full-Field Bridge Deflection Monitoring with Off-Axis Digital Image Correlation

Sensor Equipped UAS for Non-Contact Bridge Inspections: Field Application

Evaluation of a novel video- and laser-based displacement sensor prototype for civil infrastructure applications

Measuring Transverse Displacements Using Unmanned Aerial Systems Laser Doppler Vibrometer (UAS-LDV): Development and Field Validation

Automated damage detection of bridge’s sub-surface defects from infrared images using machine learning

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Single-Camera-Based Bridge Structural Displacement Measurement with Traffic Counting

INTEGRATION OF UAV-LIDAR AND UAV-PHOTOGRAMMETRY FOR INFRASTRUCTURE MONITORING AND BRIDGE ASSESSMENT

Sensing Mechanism and Real-Time Bridge Displacement Monitoring for a Laboratory Truss Bridge Using Hybrid Data Fusion.

Innovative Long-Term Monitoring of the Great Belt Bridge Expansion Joint Using Digital Image Correlation

Very High-Resolution Bridge Deformation Monitoring Using UAV-based Photogrammetry

Development and field testing of a vision-based displacement system using a low cost wireless action camera

Full-Scale Highway Bridge Deformation Tracking via Photogrammetry and Remote Sensing

An image-based bridge displacement field measurement method with self-vibration elimination

Field Application of UAS-Based Bridge Inspection