Abstract:The layered compounds LiCoO2, LiNiO2 and spinel compound LiMn2O4 have served as very effective cathode active materials in lithium ion rechargeable batteries. Generally, their high conductive resistance easily results in a serious polarization and poor utilization of active materials.In order to make full use of the active materials and increase the capacity, the charge-discharge rate and the cycle life of lithium ion batteries, conductive additives are often added into the above cathode materials to form a conductive network. Carbon materials, such as carbon black, graphite powders and chemical vapor deposit carbon fibers have been widely used as conductive additives owing to their high electrical conductivity and chemical inertness. To effectively utilize the active materials, the contents of these carbon additives in the cathode often reach up to 10～20wt%. This leads to a great need for binder, for example, 10wt% or more. It follows therefore a considerable increase in volume of the lithium batteries and lower energy density because of the large amount of carbon additives and binder in the cathode.By substituting carbon nanotubes (CNTs) for carbon black, graphite powders or chemical vapor deposit carbon fibers, much conductive additives and binder are saved, and the cathode with only 3～5wt% of conductive additives CNTs shows excellent rate capacity. At the discharge rate 0.5C,2.0C and 3.0C, the LiCoO2 cathode with CNTs exhibits discharge capacity up to 134mAh/g, 126 and 120mAh/g, respectively. The explanation is given as follows. Firstly, their microstructure and graphitic crystallinity are very important for electron transport. CNTs employed in the experiments comprise an array of complete graphite sheets seamlessly wrapped into cylindrical tubes which are concentrically nested like the rings of a tree trunk. Thus, the process of -electrons transport occurs in graphite sheet in super-conjugative manner when they move from one end to the other end in CNTs. Apparently, the CNTs' microstructure does good to

Influence of the KOH activation of carbon nanotubes on their electrochemical behavior in lithium-air batteries

Nitrogen-doped Carbon Nanotubes As Cathode for Lithium–air Batteries

Oxygen-enriched Carbon Nanotubes As a Bifunctional Catalyst Promote the Oxygen Reduction/evolution Reactions in Li-O(2 )Batteries

Isolated Transition Metal Nanoparticles Anchored on N-doped Carbon Nanotubes As Scalable Bifunctional Electrocatalysts for Efficient Zn–air Batteries

Carbon Nanotubes Act As Conductive Additives in the Cathode of Lithium Ion Batteries

Conformal Coating of Heterogeneous CoO/Co Nanocomposites on Carbon Nanotubes As Efficient Bifunctional Electrocatalyst for Li-Air Batteries

Accelerating O‐Redox Kinetics with Carbon Nanotubes for Stable Lithium‐Rich Cathodes

KOH Activated Nitrogen Doped Hard Carbon Nanotubes as High Performance Anode for Lithium Ion Batteries

Effect of oxygen-containing functional groups of carbon materials on the performance of Li–O 2 batteries

Application of Carbon Nanotube in Lithium-Ion Battery Cathodes

Carbon Cathodes in Rechargeable Lithium-Oxygen Batteries Based on Double-Lithium-Salt Electrolytes

Carbon Nanotube Array Anodes for High-Rate Li-ion Batteries

Application of carbon nanotubes as anode materials for Li-ion battery

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO 2 batteries

Orthogonal-Channel, Low-Tortuosity Carbon Nanotube Platforms for High-Performance Li-O2 Batteries

Improving the Electrocatalytic Performance of Carbon Nanotubes for VO2+/VO2+ Redox Reaction by KOH Activation

Single atom site conjugated copper polyphthalocyanine assisted carbon nanotubes as cathode for reversible Li-CO2 batteries

CO2 Oxidation of Carbon Nanotubes for Lithium-Sulfur Batteries with Improved Electrochemical Performance

Nitrogen and oxygen co-doped porous biocarbon@sulfur/carbon nanotubes as cathodes for high-performance lithium-sulfur batteries

Carbon Nanotube@RuO2 As a High Performance Catalyst for Li-CO2 Batteries

Evolution of Discharge Products on Carbon Nanotube Cathodes in Li–O 2 Batteries Unraveled by Molecular Dynamics and Density Functional Theory