Abstract:The use of high-strength steel bars (HSSB), high-strength concrete (HSC) and ultra-high performance concrete (UHPC) in bridge piers can obviously improve bearing capacity and save material consumption. However, the use of high strength materials may detrimentally affect the seismic performance of reinforced concrete (RC) piers. This paper tries to study the seismic performance of RC piers with HSSB and HSC/UHPC by quasi-static tests and seismic fragility analysis. Three RC piers, solid pier with normal strength steel bars (NSB) and normal strength concrete (NSC), solid pier with HSSB and HSC, and hollow pier with HSSB and UHPC, were designed and tested under quasi-static loading. The failure mode, hysteretic performance, stiffness degradation and residual displacement of three specimens were compared and analyzed. A fiber-based beam-column finite element model (FEM) was developed to simulate the nonlinear response of RC piers with HSSB and HSC/UHPC. On this basis, the seismic fragility analysis was performed to study the effects of high-strength materials on the seismic performance of RC piers. Research results show that, compared with NSC piers, HSC piers reinforced with a small amount of HSSB still exhibited slightly larger lateral bearing capacity but lower deformability due to the higher brittleness of HSC. The UHPC hollow pier presented obviously larger deformation capacity, and more slow decline speed of lateral stiffness than NSC and HSC solid piers. Meanwhile, the matching use of UHPC and HSSB in hollow pier can improve the elastic deformation, and then reduce residual displacement of RC piers. The proposed fiber-based finite element model (FEM) can simulate the nonlinear response of RC piers with different high-strength materials with reasonable accuracy. Fragility results demonstrate that, HSC pier presents lower seismic fragility than NSC pier at different damage states except for collapse due to lower ductility of HSC pier. The UHPC hollow pier with HSSB has lower seismic fragility than NSC and HSC solid piers at the same seismic intensity. Overall, the hollow pier with HSSB and UHPC can maintain good seismic performance while greatly saving material consumption.

Theoretical studies and verification on tall RC two-column piers with BRBs: Numerical simulations and shaking table tests

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Research on the Multi-Shear Spring Model for Circular-Section Steel Piers

Analytical Study On Buckling Restrained Braced Composite Frames

Shake table tests and numerical studies on buckling-restrained braces as a seismic resilient measure for reinforced concrete twin-column tall bents

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Experimental Investigation on Performance of Cantilever CFRP-wrapped Circular RC Columns under Lateral Low-Velocity Impact

Seismic Behavior of Buckling Restrained Braced Composite Frames

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Test and simulation on tall reinforced concrete bridge bents with shear links as structural fuses components

Subassemblage Tests and Design of Steel Channels Assembled Buckling-Restrained Braces

Full‐scale hybrid test for realistic verification of a seismic upgrading technique of RC frames by BRBs

Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading

Analysis and Verification of Load–Deformation Response for Rocking Self-Centering Bridge Piers

Seismic Performance and Damage Mechanism of RC Double-Column Pier Structure with Triple Coupling Beams

Seismic performance of RC bridges with double-column medium height bents retrofitted with SCEBs under near-field ground motions

Quasi-static tests and seismic fragility analysis of RC bridge piers with high-strength steel bars and high-strength/ultra-high performance concrete

Vibration-Reduction Strategy for High-Rise Braced Frame Using Viscoelastic-Yielding Compounded BRB

Shaking table tests of seismic-resilient post-tensioned reinforced concrete bridge piers with enhanced bases

Experimental study and numerical simulation of all‐steel buckling‐restrained brace with distributed inspection windows