Abstract:Accurate finite element (FE) models are extremely vital to the analysis of the dynamic characteristics of engineering structures. However, it is challenging for the frequency response function (FRF)-based model updating method to obtain reliable numerical results as the limited number of FRFs at the selected peak positions usually leads to an unacceptable or failure of model updating. Moreover, the increased number of updating coefficients in complex engineering problems generates nonlinear optimization models with the local solutions by traditional optimization techniques. To tackle these two issues, a new model updating method is proposed to make full use of FRFs extracted from measured field data of structures and the improved particle swarm optimization (PSO) technique for accurately estimating physical parameters of structures. The novelties of this research include: (1) The signature assurance criterion (SAC)-based FRF is evaluated to eliminate the influence of limited frequency points on the accuracy of the updated model using the normalized acceleration component; (2) The enhanced (PSO) is developed to realize the adaptive selection of inertia factors for the better diversity by introducing an average value of the fitness function, and then accurate predictions of updating coefficients within a smaller number of iterations are achieved using the developed constraint factor. The effectiveness of the proposed method is verified by mathematical model of a jacket platform. Results show that the proposed method can accurately obtain the updating coefficients under spatial incomplete condition, and the maximum error of natural frequencies is 0.779% using the accelerations containing 5% noise. To prove the robustness of the proposed method, experimental studies of monopile offshore wind turbine are also conducted and the maximum error of natural frequencies is 1.887% under the consideration of spatial incompleteness represented by the structural stiffness degradation. Finally, the feasibility of the proposed method is evaluated by a test of a complex jacket platform, whose variation is simulated by weakening the connections of some elements. The maximum error of natural frequencies predicted by the updated model is only 4.831% as compared with experimental results. Throughout these examples, the extended FRF model updating method provides engineers and designers with a useful insight into the development of reliable techniques to accurately predict dynamic responses of offshore structures.

Identification of Joint Equivalent Parameters Via Combining PSO with FE Model Updating

EQUIVALENT IDENTIFICATION OF JOINT DYNAMIC PARAMETERS BASED ON PARTICLE SWARM OPTIMIZATION ALGORITHM

Identification of DFIG parameters based on improved PSO algorithm

Parameter Estimation of Catalytic Cracking Model Using PSO Algorithm

Model selection and parameter estimation of nonlinear system based on PSO

The Identification Research of Nonlinear System Based on PSO with Fuzzy Adaptive Inertia Weight

An improved PSO algorithm for parameter identification of nonlinear dynamic hysteretic models

Joints Parameters Identification in Numerical Modeling of Structural Dynamics

PSO Inverse Identification Method for Acoustic Parameters of Porous Materials Based on FE–SEA Model

A Joint Stiffness Identification Method Based on Finite Element Modeling and Frequency Response Functions

A Developed Model Updating Method Based on Extended Frequency Response Functions and Its Application Study of Offshore Structures

Identification of Nonlinear Joint Parameters with Force-state Mapping Method

A Novel Hybrid PSO Identification Method Simultaneously Estimate Model Parameter and the Structure

A Modified PSO Algorithm with Dynamic Parameters for Solving Complex Engineering Design Problem

A Fuzzy Method of Identifying Joint Parameters of Mechanical Structure

Identifying mechanical joint dynamic parameters based on measured frequency response functions

Combined fitness function based particle swarm optimization algorithm for system identification

An Approach for Identifying Dynamic Parameters in Robotic Systems With Inconsistent Joint Measurements

Parameter identification and qualitative sensitivity analysis of hysteretic model by Particle Swarm Optimization

Structural Dynamic Model Updating with Automatic Mode Identification Using Particle Swarm Optimization

Model updating of a bridge structure using vibration test data based on GMPSO and BPNN: case study