Abstract:This paper studies the unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC), in which UAVs are dispatched as aerial dual-functional access points (APs) that can exploit the UAV maneuver control and strong line-of-sight (LoS) air-to-ground (A2G) links for efficient communication and sensing. In particular, we consider that one UAV-AP, equipped with a vertically placed uniform linear array (ULA), sends combined information and sensing signals to communicate with multiple users and at the same time sense potential targets at interested areas on the ground. Under this setup, we consider two scenarios with quasi-stationary and fully mobile UAVs, in which the UAV is deployed at an optimizable location over the whole ISAC mission period and can fly over different locations during the ISAC mission period, respectively. For the two scenarios, our objective is to jointly design the UAV maneuver (deployment location or flight trajectory) and the transmit beamforming, for maximizing the weighted sum-rate throughput of communication users, while ensuring the sensing beampattern gain requirements, subject to the transmit power and flight constraints. However, due to the ULA consideration at the UAV, the two formulated problems are highly non-convex and very difficult to be optimally solved, as the UAV's location/trajectory variables are involved on the exponent parts of each entry in the steering vectors, and are closely coupled with the transmit beamforming vectors. To tackle this issue, we propose efficient algorithms to find their suboptimal but high-quality solutions, by using various techniques from convex and non-convex optimization. Finally, numerical results are provided to validate the superiority of our proposed designs as compared to various benchmark schemes with heuristic maneuver designs. It is shown that the joint maneuver and transmit beamforming design efficiently balances the inherent tradeoff between sensing and - ommunication with regards to different beampattern gain thresholds.

Simultaneous Lever-Arm Compensation and Disturbance Attenuation of POS for a UAV Surveying System.

Pose Alignment of Aircraft Structures with Distance Sensors and CCD Cameras

Design and Development of Array POS for Airborne Remote Sensing Motion Compensation

Robust Visual-Lidar Simultaneous Localization and Mapping System for UAV

An Aeromagnetic Compensation Strategy for Large UAVs

Joint Data Collection and Sensor Positioning in Multi-UAV-Assisted Wireless Sensor Network

A Robust Motion Compensation Approach for UAV SAR Imagery

The Adaptive Compensation Algorithm for Small UAV Image Stabilization

Research on aeromagnetic compensation of a multi-rotor UAV based on robust principal component analysis

Non-linear compensation algorithm of LOS locating in aerial remote sensor.

Joint Maneuver and Beamforming Design for UAV-Enabled Integrated Sensing and Communication

Disturbance Compensation Based Piecewise Linear Control Design for Perching Maneuvers

Aeroelastics-aware compensation system for soft aerial vehicle stabilization

Precise Motion Compensation Approach for High-Resolution Multirotor UAV SAR in the Presence of Multiple Errors

A manipulator-assisted multiple UAV landing system for USV subject to disturbance

A tightly-coupled LIDAR-IMU SLAM method for quadruped robots

Design of Dual Loop Control to Attenuate Vibration of Payload Carried by a UAV

A Proposed System for Multi-UAVs in Remote Sensing Operations

A Magnetic Interference Compensation Method for Airborne Electronic Equipment without Current Sensors

LVCP: LiDAR-Vision Tightly Coupled Collaborative Real-time Relative Positioning

Adaptive compensation control for attitude adjustment of quad-rotor unmanned aerial vehicle