Abstract:This paper addresses the measurement and modelling of the damaged properties of asphalt mixtures including the fracture, healing and viscoplastic deformation of the asphalt mixtures in both tensile and compressive loading as being affected by their composition and conditioning with ageing and exposure to temperature and moisture. An energy-based mechanics is applied to obtain the material fundamental properties such as surface energies, bond energies, anisotropy, yield functions and plastic potential functions that are valid for actual asphalt mixtures, viscoelastic crack growth criteria under both tensile and compressive loading, a simple mechanics-based method of determining the fatigue endurance limit, and the measurement and prediction of healing in restoring the damage done by fracture. Healing is anti-fracture and cracking is the net result of the interplay of these two complimentary mechanisms. Because fracture in asphalt mixtures is not the growth of a single crack but the simultaneous growth of multiple cracks that start out as air voids, this fact leads to the use of the growth of damage density to characterise fracture in an asphalt mixture. It was discovered that the form of Paris' law applies to the growth of damage density of asphalt mixtures in both tensile and compressive loadings. The importance of this fact lies in many developments from this discovery, e.g. compressive monotonic loading of cylindrical test samples permits a direct determination of the Paris' Law coefficient and exponent. In all cases, measured material properties are presented as they vary with mixture composition and with conditioning such as moisture and ageing, both in the lab and in the field. The measurements of these properties are made simply, quickly and accurately by the use of mechanics so that an entire characterisation of the properties of an asphalt mixture in tension and compression can be completed in the space of one day. The net effect is to reduce the efforts expended in the lab and the systematic error due to the assumptions made by the existing models and simultaneously to increase the efficiency and cost-effectiveness of materials testing and raise the reliability of the design of mixtures, pavement structures and specifications and the prediction of the life cycles in as-built pavements.

The role of binders in mixture cracking resistance measured by ideal-CT test

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Development of a composite specimen interface cracking (CSIC) test for top-down cracking

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Using Surface Free Energy to Evaluate the Fracture Performance of Asphalt Binders

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Characteristics of Undamaged Asphalt Mixtures in Tension and Compression

Test Method to Evaluate the Effect of Interface Bond Conditions on Top-Down and Reflective Cracking

Pseudo Energy-Based Crack Initiation Criterion for Asphalt-Filler Composite System under a Fatigue Shear Load

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Characteristics of Damaged Asphalt Mixtures in Tension and Compression

Nonlinear Viscoelastoplastic Kinetics for High-Temperature Performance of Modified Asphalt Binders

A new "mix-confined" repeated load test for evaluating permanent deformation of asphalt mixture

Research on the Anti-Cracking Performance of High Viscoelastic Tar Sands

Investigating the Crack Initiation and Propagation of Asphalt Binder in Linear Amplitude Sweep Test

Characterization of Recovery in Asphalt Binders.

Healing Kinetics of Asphalt Binder Based on a New Testing Approach

Asphalt Binder Fatigue Life Estimation Based on Energy Principles

Evaluation of Asphalt Mixture Performance Using Cracking and Durability Tests at a Full-Scale Pavement Facility

Assessing the Suitability of Different Testing and Specimen Preparation Approaches for Indirect Tensile Cracking Test (IDT-CT) Using a Simple Ranking Framework

Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method