Abstract:This paper discusses the effect of oil palm empty fruit bunch (OPEFB) filler loading on the mechanical properties of thermoplastic starch/oil palm empty fruit bunch (TPS/OPEFB) biocomposite film. OPEFB filler was extracted from raw OPEFB by cleaning, grinding, ring milling and sieving processes to obtain 150 µm lignocellulosic fibers. The fibers were then subjected to alkaline and acid treatment to obtain the cellulose (filler). TPS matrix was prepared by combiSning the distilled water, corn starch and glycerol under thermomechanical process (stirring and heating). OPEFB filler in 1wt%, 2wt%, 3wt%, 4wt%, and 5wt% was added into the TPS matrix. The TPS/OPEFB mixture was casted in teflon pan and dried in oven (45 C) for 24 hours to form the biocomposite film. Results indicated that the TPS/OPEFB biocomposite films have better tensile strength and Young's modulus compared to the pure TPS film. Tensile strength of the biocomposite showed an increasing trend when the OPEFB filler loading was increased from 1wt% to 4wt%. Significant increment of tensile strength could be observed when 4wt% OPEFB filler was added into the TPS matrix. The TPS/OPEFB biocomposite with 4wt% OPEFB achieved the highest tensile strength value (4.51 MPa), which was 109.8% higher than the pure TPS. However, further increase of OPEFB loading to 5wt% resulted in the decrease of the tensile strength of the biocomposite. Young's modulus of the biocomposite followed the trend of the tensile strength, where the addition of OPEFB from 1wt% to 4wt% resulted in the continuous improvement of the Young's modulus value. Interestingly, the addition of 4wt% OPEFB led to tremendous increment of Young's modulus. When benchmarked with the pure TPS, the Young's modulus of the TPS/OPEFB biocomposite with 4wt% OPEFB loading increased by 364%. Further addition of OPEFB to 5wt% decreased the Young's modulus of the biocomposite to 1.10 MPa. This could be due to the overcrowding of the OPEFB cellulose in the TPS matrix, poor dispersion of filler, reduction in the filler-matrix interactions that inhibit efficient stress transferring mechanism from matrix to filler.

Bioplastic from empty fruit bunch cellulose/chitosan /starch: Optimization through box-Behnken design to enhance the mechanical properties

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Preparation of bioplastic film from chitosan and mango (Mangifera Indica L. Anacardiaceae) kernel starch by casting method

Characterization and Parametric Study on Mechanical Properties Enhancement in Biodegradable Chitosan-Reinforced Starch-Based Bioplastic Film

Assessment and Optimization of Thermal Stability and Water Absorption of Loading Snail Shell Nanoparticles and Sugarcane Bagasse Cellulose Fibers on Polylactic Acid Bioplastic Films

Synthesis of Biodegradable Plastic Film from Chitosan-Glycerol with Cellulose Nanowhiskers of Coconut Coir as Reinforcing Agent

Cellulose Nanofibers from Palm Oil Empty Fruit Bunches as Reinforcement in Bioplastic

Synthesis of biodegradable plastic from corn starch and corn husk filler with addition of glycerol as plasticizer and variation of chitosan composition

Fabrication and characterization of biocomposite pellets from cassava starch and oil palm empty fruit bunch fibers

Elaboration and characterization of bioplastic films based on bitter cassava starch (Manihot esculenta) reinforced by chitosan extracted from crab (Shylla seratta) shells

Synthesizing High-Strength Biodegradable Polymer Film from Ethiopian False Banana Pseudo-Stem Using POSS and Chitosan as a Filler

Biodegradable plastic formulated from chitosan of Aristeus antennatus shells with castor oil as a plasticizer agent and starch as a filling substrate

Effect of Plasticizer and Concentration on Characteristics of Bioplastic Based on Cellulose Acetate from Kapok (Ceiba pentandra) Fiber

Plasticized Cellulosic Films by Partial Esterification and Welding in Low-Concentration Ionic Liquid Electrolyte

Optimization of Alkali-Treated Banana Pseudo-Stem Fiber/pbat/pla Bio-Composite for Packaging Application Using Response Surface Methodology

Mechanical properties of thermoplastic starch/oil palm empty fruit bunch biocomposite film

Tough and Strong All-Biomass Plastics from Agricultural and Forest Wastes via Constructing an Aggregate of Hydrogen-Bonding Networks

Bioplastic production from cellulose of oil palm empty fruit bunch

Hemicellulose additive to chitosan-based bioplastic improved the tensile strength and allowed to control the material swelling

Response Surface Methodology for Formulating PVA/Starch/Lignin Biodegradable Plastic

Preparation and Characterization of Biodegradable Composited Films Based on Potato Starch/Glycerol/Gelatin