Abstract:Abstract Turbojet and turbofan engine propulsion system are extensively used in aircraft. Turbojets have simple engine design and extensively used for supersonic flights. Turbofan engine has high mass flow rate and efficient for subsonic application. Variable Cycle Engines, unlike the traditional engines, can vary between high thrust mode for supersonic operations and high efficiency mode for subsonic operations hence are potentially attractive for supersonic transport and advanced tactical fighter aircraft. Variable Cycle Engine can be described as the one that operates with two or more cycles, could serve as a possible solution to reconciling the necessary performance at different operating conditions. The aim of the engine is to combine the best traits of turbojet (high specific thrust) and turbofan (low specific fuel consumption, low noise). Traditional engines have fixed mass flow but VCE can alter the mass flow and function as high bypass engine for the subsonic case and low bypass engine at the supersonic case. Different variable cycle engine design philosophies were studied and the engine architecture used in F120 was incorporated into the base design of a low bypass ratio Turbofan Engine. Cycle analysis of VCE was primarily done based on theoretical calculation and parametric study performed with the use of Gasturb software. Two Variable Area Bypass Injectors (VABI) were used to vary the mass flow through the core and the bypass stream. We aspire to achieve enhanced performance at subsonic and supersonic mission segments. Subsonic, supersonic and take off conditions were decided and the base engine was modified to have multiple operating points. The VCE combines two cycles (subsonic, supersonic) in same engine body and it is crucial for the engine components to deliver the required performance at both the design points. The engine design procedure consists of the matching of components like turbine, compressor, exhaust nozzle and the exhaust mixing area. Systematic study of turbine matching for such engine configuration with multiple operating points was carried out to understand the utility of variable geometry in a VCE. For turbine matching, the mass flow through turbine was held constant by adjusting the VABIs and this was repeated for different takeoff conditions to analyses the output in detail. The non dimensional mass flow through the turbine was fixed for both the design points and hence the turbine could be designed to provide high efficiency. The fuel consumption was found to have decreased compared to the baseline condition which in turn leads to low SFC and higher endurance.

Integrated Thermal Management of Advanced Aircraft

Integrated Design Of A Variable Cycle Engine And Aircraft Thermal Management System

Design and Analysis of an Aircraft Thermal Management System Linked to a Low-Bypass Ratio Turbofan Engine

Simulation of an aircraft thermal management system based on vapor cycle response surface model

Architecture Generation and Performance Evaluation of Aircraft Thermal Management Systems Through Graph-based Techniques

Hardware-in-the-loop validation of advanced fuel thermal management control

Thermal Management challenges for HEA – FUTPRINT 50

Thermal Management Systems for Civil Aircraft Engines: Review, Challenges and Exploring the Future

Data Driven Tools and Methods for Microtexture Classification and Dwell Fatigue Life Prediction in Dual Phase Titanium Alloys

Optimization Research on the Heat Transfer Capacity of an Aircraft Fuel Thermal Management System

Integrated Thermal Management System Design for Advanced Propulsion System

Finite element analysis of thermal barrier properties under relevance vector machine in coated pistons and blades

Parametric Study for Adoption of Variable Cycle Engine Concept for Low Bypass Ratio Turbofan Engine

CFD/FEA Co-Simulation Framework for Analysis of the Thermal Barrier Coating Design and Its Impact on the HD Diesel Engine Performance

Integrated Power and Thermal Management System for a Hybrid-Electric Aircraft: Integrated Modelling and Passive Cooling Analysis

Thermal management of fuel heat sink in aircraft via flow path optimization

Aero-thermal investigation of thermal interactions between turboprop engine exhaust and selected parts of the airplane skin for tractor configured aircraft

On the Design of Integrated Thermal Management Systems for eVTOL Aircraft

Partitioned Coupled Heat Transfer Fluid-Structure Interaction for Transient and Steady State Analysis of Aero Engines Applications

Parameter-Matching Algorithm and Optimization of Integrated Thermal Management System of Aircraft

A Study on Thermal Management Systems for Hybrid–Electric Aircraft