Abstract:The commercialization of mass hydrogen production via water electrolysis is presently limited by low operational current densities. The optimal performance of electrolysis cells is significantly influenced by the substantial formation and residence of bubbles at high current densities. Thus, it is crucial to design electrodes with the ability for rapid bubble discharge to ensure appropriate bubble management. However, the quantitative volumetric measurements required to determine the bubble discharge ability of an electrode are not yet sufficiently accurate. This paper describes a quantitative volumetric method that combines a stereoscopic shadowgraph imaging system with particle tracking velocimetry (PTV) to measure the three-dimensional position, size, and velocity of micrometer-sized bubbles. The proposed method successfully captures hydrogen bubbles larger than 30 μm bubbles in an alkaline water electrolyzer. Considering the different luminance patterns of small bubbles (r ≤ 4 pixels) and large bubbles (r > 4 pixels) in the current imaging system, a bubble-size adaptive detection algorithm is established based on the cascade correlation method to obtain the two-dimensional centroid coordinates and radius of the observed bubbles. The bubble size information is also introduced into a two-view PTV algorithm for retrieving the Lagrangian trajectory of each bubble. Both the bubble detection and PTV algorithms are validated using synthetic datasets. Once the bubble trajectories are resolved successfully, the three-dimensional bubble velocity is obtained, and the actual bubble sizes are further corrected using the depth information. Analysis of the trajectory and velocity components indicates the existence of lateral bubble motion, reflecting interactions among bubbles. The rise velocity is positively correlated with the bubble radius in two regions, respectively, and the deviation from the theoretical value reveals the influence of non-buoyancy factors. The proposed technique provides effective diagnostics of the three-dimensional dynamic characteristics of micrometer-sized bubbles and can be used to evaluate and design bubble management systems for various electrochemical energy conversion devices.

H$_2$ bubble motion reversals during water electrolysis

Electrolyte spraying within H$_2$ bubbles during water electrolysis

Evolution of hydrogen bubbles on a microelectrode driven by constant currents and its impact on potential response

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Transient nanobubbles in short-time electrolysis

Performance enhancement of electrocatalytic hydrogen evolution through coalescence-induced bubble dynamics

A model of the growth of hydrogen bubbles in the electrolysis of water

Highly energetic phenomena in water electrolysis

Hydrogen bubble evolution and gas transport mechanism on a microelectrode determined by cathodic potential and temperature

Mechanism of Potential Oscillation during Electrolysis of Water in Acidic Solutions

Rapid detachment of hydrogen bubbles for electrolytic water splitting driven by combined effects of Marangoni force and the electrostatic repulsion

Enhancing hydrogen bubble release from a microelectrode through precise tuning of Marangoni forces with nonionic surfactant

In Situ Observation of Electrolytic H2 Evolution Adjacent to Gold Cathodes.

Measuring three-dimensional bubble dynamics for hydrogen production via water electrolysis

In Situ Observation and Electrical Signal Analysis of Different Bubble Detachment Modes on Microelectrode Surface

Insight into Ph-Controlled Bubble Dynamics on a Pt Electrode During Electrochemical Water Splitting

Three-dimensional coupling numerical simulation of two-phase flow and electrochemical phenomena in alkaline water electrolysis

Gas Evolution in Water Electrolysis

Life beyond Fritz: On the detachment of electrolytic bubbles

Dynamic equilibrium of electrochemical bubbles growing on micro-electrodes