Abstract:Amphiphilic hyper-crosslinked porous cyclodextrin polymer (PBCD-B-D) with a surface area of 1445 m2 g−1 was synthesized for rapid removal of organic micropollutants. Partially benzylated cyclodextrin was crosslinked with 4,4′-bis(chloromethyl)-1,1′-biphenyl and α,α'-dichloro-p-xylene by the Friedel–Crafts alkylation reaction. The hydrophilicity of the PBCD-B-D surface is modulated by controlling the number of hydroxyl groups on cyclodextrin. Benzylation reaction is more likely to occur at the C-2 and C-6 positions of cyclodextrin hydroxyl groups according to Gaussian computation. Four different water-soluble pollutants (3-phenylphenol, 2-naphthol, p-nitrophenol, and 4-chlorophenol) were selected for adsorption study. The adsorption rate of PBCD-B-D is extremely high, and the removal efficiency reaches above 95% in 1 min. For the adsorption of 3-phenylphenol and 2-naphthol, the rate constants of PBCD-B-D are 827–1187 and 396–413 times larger than those of granular activated carbon (GAC) and β-cyclodextrin polymer crosslinked with epichlorohydrin (EPI-CDP), respectively. The adsorption capacity of PBCD-B-D is 2 and 4 times higher than that of GAC and EPI-CDP, respectively. The combination of cyclodextrin inclusion mechanism, hydrophobic attraction, and hydrogen bonding allows PBCD-B-D to adsorb both hydrophobic and hydrophilic pollutants. PBCD-B-D can be easily regenerated at room temperature using methanol as eluent. In addition, PBCD-B-D showed excellent adsorption performance towards mixed pollutants at environmentally relevant concentrations. According to the thermodynamic study, the adsorption of organic compounds onto PBCD-B-D belongs to physical adsorption and is spontaneous. PBCD-B-D is a potential novel adsorbent for water treatment owing to its excellent adsorption performance, low cost, and good regenerability.

A double-crosslinked cyclodextrin-based porous polymer for effective removal of bisphenol A: Preparation, adsorption behavior and mechanism

Efficient Adsorption of Bisphenol A from Water by a Hierarchically Porous Hyper-Crosslinked Polymer Containing Β-Cyclodextrin Polyurethane

Design of a Hyper-Crosslinked Β-Cyclodextrin Porous Polymer for Highly Efficient Removal Toward Bisphenol a from Water

Diatomite Cross-Linkedβ-cyclodextrin Polymers: A Novel Vision of Diatomite Adsorbent for the Removal of Bisphenol A

Improving the Removal Rate of Bisphenol A and Cu2+ from Water Using P/N Coexisting Β-Cyclodextrin-based Adsorbents by Enhancing Adsorbents-Pollutants Interactions

Adsorptive Removal of Bisphenol A, Chloroxylenol, and Carbamazepine from Water Using a Novel Β-Cyclodextrin Polymer.

PDA-cross-linked Beta-Cyclodextrin: a Novel Adsorbent for the Removal of BPA and Cationic Dyes.

Method to Fabricate Porous Multifunction Β-Cyclodextrin Modified Resin for Ultrafast and Efficient Removal of Cu(II) and Bisphenol A

A Novel Amphoteric Β-Cyclodextrin-based Adsorbent for Simultaneous Removal of Cationic/anionic Dyes and Bisphenol A

Porous β-cyclodextrin nanotubular assemblies enable high-efficiency removal of bisphenol micropollutants from aquatic systems

Hierarchically Porous Polymers with Ultra-High Affinity for Bisphenol A Enables High Efficient Water Purification

Citric Acid-Crosslinked Β-Cyclodextrin for Simultaneous Removal of Bisphenol A, Methylene Blue and Copper: the Roles of Cavity and Surface Functional Groups

Facile Synthesis of Novel Multifunctional Β-Cyclodextrin Microporous Organic Network and Application in Efficient Removal of Bisphenol A from Water.

Β-Cyclodextrin-modified Graphene Oxide Membranes with Large Adsorption Capacity and High Flux for Efficient Removal of Bisphenol A from Water

Amphiphilic hyper-crosslinked porous cyclodextrin polymer with high specific surface area for rapid removal of organic micropollutants

Fabrication of Chitin Based Hydrophilic Hyper-Crosslinked Porous Polymer for Efficiently Removing Bisphenol A from Water.

Enlargement of Uniform Micropores in Hierarchically Ordered Micro–mesoporous Carbon for High Level Decontamination of Bisphenol A

A Novel 3D Adsorbent of Reduced Graphene Oxide-Β-cyclodextrin Aerogel Coupled Hardness with Softness for Efficient Removal of Bisphenol A

Cyclodextrin-boosted Photocatalytic Oxidation for Efficient Bisphenol A Removal

Design of functionalized polypropylene non-woven fabric with high β-CD grafting degree for bisphenol a removal: Adsorption performance and resistance

Efficient adsorption of BPA and Pb 2+ by sulfhydryl-rich β-cyclodextrin polymers