Abstract:Polymer coatings have been widely used in the automobile industry for the corrosion protection of metallic materials. However, the failures of the polymer materials are caused by the extensive exposure of the coated steel to the aggressive electrolytes. To enhance the protective performance of the polymer coatings, functionalized nanoparticles are added to the polymers. The 2-aminothiazole (AT) modified TiO2–ZrO2 nanoparticles examined by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), and X-ray diffractometry (XRD) were added to polyurethane (PU). The synthesized PU–AT/TiO2–ZrO2-coated specimen was studied by scanning electrochemical microscopy (SECM), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) for their anti-corrosion and mechanical behaviours. EIS studies revealed excellent protection behaviour for the PU–AT/TiO2–ZrO2-coated steel in natural seawater. The coating resistance of the PU–AT/TiO2–ZrO2 nanocomposite was found to be 1970.17 kΩ.cm2, whereas lower coating resistance was observed for the pure polyurethane-coated steel (62.17 kΩ.cm2. It is found that the coating resistance of PU–AT/TiO2–ZrO2 nanocomposite is over 48% higher than that of the PU coating. The measured current by SECM investigation over the PU–AT/TiO2–ZrO2 nanocomposite coating was very low (1.4 nA) in comparison with the PU coating (6.1 nA). The surface morphological studies of the coated steel by SEM/EDX analysis and X-ray diffraction (XRD) analysis revealed that the TiO2–ZrO2 nanoparticles were enriched at the corrosion products which prevented corrosion initiation processes. The enhanced dynamic mechanical properties were noticed for PU–AT/TiO2–ZrO2 coating when the concentration of nanoparticles was 3 wt%. However, there was a decrease in their mechanical properties beyond 3 wt% because of the aggregation of nano-TiO2–ZrO2 particles in the PU matrix. The resulting PU–AT/TiO2–ZrO2 formulation exhibits an excellent hydrophobic behaviour (WCA: 116.9º). Therefore, it was concluded from the investigations that the newly synthesized PU–AT/TiO2–ZrO2 nanocomposite provided excellent barrier, mechanical, and hydrophobic properties due to the addition of AT/TiO2–ZrO2 nanoparticles to the polyurethane which prevented the degradation of materials and helped to prolong the life of the coated steel.

TiO 2 -Mesoporous Ceria Carrier Modified with Sodium Benzoate: An Innovative Polyurethane Matrix for Enhanced Corrosion Protection of steel

Hydrophobic Al2O3/SiO2/PDMS Composite Coatings for Anti-corrosion Application of 304 Stainless-Steel

Self-healing performance of smart coatings modified with different corrosion inhibitors

Fabrications of hybrid Polyurethane-Pd doped ZrO2 smart carriers for self-healing high corrosion protective coatings

Anticorrosion Performance of TiO2/Epoxy Films with Doped Polyaniline and Poly(o-ethoxyaniline) Applied to Carbon Steel in 3.5 wt % NaCl Acid Solution

Polyolefin-Based Smart Self-Healing Composite Coatings Modified with Calcium Carbonate and Sodium Alginate

Effects of TiO2 Nanoparticles on the Overall Performance and Corrosion Protection Ability of Neat Epoxy and PDMS Modified Epoxy Coating Systems

Stretchable and self-healing polyurethane coating with synergistic anticorrosion effect for the corrosion protection of stainless steels

Electrochemical and dynamic mechanical properties of polyurethane nanocomposite reinforced with functionalized TiO2–ZrO2 nanoparticles in automobile industry

Functionalized Ti3c2tx-Based Nanocomposite Coatings for Anticorrosion and Antifouling Applications

Preparation and Modification of Polydopamine Boron Nitride—Titanium Dioxide Nanohybrid Particles Incorporated into Zinc Phosphating Bath to Enhance Corrosion Performance of Zinc Phosphate-Silane Coated Q235 Steel

Silanized MXene/Carbon Nanotube Composites as a Shielding Layer of Polyurethane Coatings for Anticorrosion

Corrosion protection of 304 stainless steel from a smart conducting polypyrrole coating doped with pH-sensitive molybdate-loaded TiO2 nanocontainers

The preparation of cerium nitrate and attapulgite based superhydrophobic epoxy coatings for the corrosion protection of Q355 mild steel surface

Effectiveness of Epoxy Coating Modified with Yttrium Oxide Loaded with Imidazole on the Corrosion Protection of Steel

Polyurethane Nanocomposite Coatings Coupled with Titanium-Based Conversion Layers for Enhanced Anticorrosion, Icephobic Properties, and Surface Protection

Effects of incorporation of nanotitania in magnesium phosphate cement for the protection of carbon steel in harsh environments

Designing Hybrid Mesoporous Pr/Tannate-Inbuilt ZIF8-Decorated MoS2 as Novel Nanoreservoirs toward Smart pH-Triggered Anti-corrosion/Robust Thermomechanical Epoxy Nanocoatings

Enhanced Coating Protection of C-Steel Using Polystyrene Clay Nanocomposite Impregnated with Inhibitors

Smart Coating of Carbon Steel Using Polystyrene Clay Nanocomposites Loaded with Cerium and Silanol Inhibitors: Characterization and Electrochemical Study

Surface-modified cerium oxide as a corrosion inhibitor to enhance the performance of epoxy coatings