Abstract:Oil leakage results in serious environmental pollution and severe waste of resources, which makes the development of low-cost, environmentally friendly, high-capacity, and durable oil absorbents an urgent task. In this paper, superhydrophobic coatings of activated carbon (AC)–TiO2– were developed without using any fluorine-containing reagents. The TiO2 particles were grown on the AC surface to form AC–TiO2 powders. The hydrophilic AC–TiO2 powders were further grafted with polydimethylsiloxane (PDMS) molecules (AC–TiO2–PDMS) to achieve superhydrophobicity through covalent reaction between PDMS and TiO2 under UV light. The AC–TiO2–PDMS powder was mixed with a PDMS polymer to form a superhydrophobic coating solution, which made the commercial sponge obtain durable superhydrophobicity. It showed high liquid repellency and antifouling ability toward various liquids and drinks. Taking advantage of the large surface area and high absorption capacity of AC, the coated sponge showed superior high absorption capacity (up to 100–158 g/g) toward various oils and organic solvents with a high absorption speed. Besides, the sponge showed high reusability that could be repeatedly used to absorb various oils and organic solvents. Moreover, the sponge also presented photocatalytic capability, which could repeatedly photodegrade the oil contaminants without influencing the superhydrophobicity, therefore largely increasing the recyclability and lifetime of the sponge. It also could separate immiscible oil–water mixtures with high efficiency and continuously remove oils from water. It was chemically stable and mechanically durable and could resist various harsh conditions without losing its superhydrophobicity. This study developed a facile, cost-effective, and environmentally friendly method to fabricate very promising absorbents for large-scale oil and solvent cleanups and recovery.This article has not yet been cited by other publications.

Coating Sponge with a Hydrophobic Porous Coordination Polymer Containing a Low-Energy CF3-decorated Surface for Continuous Pumping Recovery of an Oil Spill from Water

Designing MOFs/CuCo-LDHs Hybrid-Based Superhydrophobic Sponge for Speedy Eliminating Microplastics, Dyes, and Oils from High-Salinity Water

Pumping with Modified Polyurethane Sponge: An Alternative Technology for Removing Oil Spills from Water Surface

Design of Recyclable Superhydrophobic PU@Fe3O4@PS Sponge for Removing Oily Contaminants from Water

A Modified Porous Sponge with Selective Ability for Oil Removal from Oil-Water Mixtures

Mussel-Inspired and In Situ Polymerization-Modified Commercial Sponge for Efficient Crude Oil and Organic Solvent Adsorption

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

Construction and Regulation of a Superhydrophobic Sponge via In Situ Anchoring of a Hyper-Cross-Linked Polymer for Efficient Oil/Water Separation

Superhydrophobic/Superoleophilic Polyurethane /reduced Graphene Oxide/ Sponge for Efficient Oil-Water Separation and Photothermal Remediation

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal

Green Fabrication of a Multifunctional Sponge as an Absorbent for Highly Efficient and Ultrafast Oil–Water Separation

Superhydrophobic wood sponge with intelligent pH responsiveness for efficient and continuous oil-water separation

Durable Superhydrophobic/Superoleophilic Graphene-based Foam for High-efficiency Oil Spill Cleanups and Recovery.

Interfacial assembly of a durable superhydrophobic polyurethane sponge with "scalelike" structures for efficient oily emulsion separation

Robust superhydrophobic polyurethane sponge functionalized with perfluorinated graphene oxide for efficient immiscible oil/water mixture, stable emulsion separation and crude oil dehydration

Construction of superhydrophobic ZIF-90/Melamine sponge with highly stable puncture structure for sustainable oil spill removal from seawater

Superhydrophobic Melamine–Formaldehyde Sponge Functionalized by Coupling Agent–Isocyanate Siloxane as Efficient Absorbents for Oil and Organic Solvents

Hydrophobic organogel sorbent and its coated porous substrates for efficient oil/water emulsion separation and effective spilled oil remediation

Superhydrophobic and magnetic PS/Fe3O4 sponge for remote oil removal under magnetic driven, continuous oil collection, and oil/water emulsion separation

Shish-Kebab-Structured UHMWPE Coating for Efficient and Cost-Effective Oil-Water Separation

Room-temperature synthesis of fluorinated covalent organic framework decorated superhydrophobic sponges for highly efficient crude oil spill cleanup