Abstract:Although a wide variety of three-dimensional porous electrode architectures have been created for supercapacitors to markedly enhance the charge and mass transfer associated with cycling, their low volumetric energy densities limit applications in many energy storage systems. In this work, we report a unique electrode architecture consisting of Ni3S2 nanosheet-onto-Ni3S2-nanorods grown on nickel foam and prepared using a simple one-step hydrothermal method. When tested as an electrode for a supercapacitor (using a three-electrode configuration), this material exhibited excellent rate capability and cycling stability at high cycling rates. The obtainable capacitance decreased by <42% as the current density was increased from 20 to 240 mA cm−2, and the capacity retained 89.3% of its initial value after 5000 cycles at a cycling rate of 120 mA cm−2. Further, an asymmetric supercapacitor consisting of the Ni3S2 nanosheet-onto-Ni3S2-nanorods electrode and an activated carbon (AC) electrode displayed a volumetric energy density as high as ~1.96 mWh cm−3, with the potential to bridge the performance gap between thin-film Li batteries and commercial AC//AC supercapacitors. The outstanding electrochemical performance is attributed to the good mechanical adhesion and electrical connection with the substrate, high contact area with the electrolyte and alleviated structural pulverization during the ion insertion/desertion process. It is predicted that the architectural Ni3S2-nanosheet-on-nanorods array prepared with this facile method offers great potential promise in large-scale energy storage device applications. An electrode material for considerably enhanced storage of electrical energy in supercapacitors has been developed by an international team. Supercapacitors offer high charge storage capacities and rapid energy release, but they typically have lower volumetric energy storage densities than rechargeable batteries, making them bulkier in comparison. Supercapacitor electrodes having high surface areas through nanoscale morphologies offer a solution but can be difficult to fabricate. Now, Meilin Liu from Georgia Institute of Technology in the USA, Chenghao Yang from South China University of Technology in China, and their colleagues have used a simple one-step hydrothermal method to fabricate an architecture based on nickel sulfide (Ni3S2) nanosheets and nanorods. Supercapacitors made from these materials showed a high volumetric energy density and a long durability. The researchers anticipate that this architecture will be useful for large-scale energy storage devices. Three kinds of Ni3S2 nanostructures, namely Ni3S2 nanorods, Ni3S2 nanosheet@nanorods and Ni3S2 multi-connected nanorods were prepared using a one-step hydrothermal process via controlling the temperature. Owing to the good mechanical adhesion and electrical connection with the substrate, high contact area with the electrolyte and alleviated structural pulverization during the ion insertion/desertion process, Ni3S2 nanosheet-onto-Ni3S2 nanorods exhibited excellent rate capability and cycling stability. Asymmetric supercapacitor consisting of Ni3S2 nanosheet @nanorods electrode and activated carbon (AC) electrode displayed a volumetric energy density of 1.96 mWh cm−3, which can be used to bridge the performance gap between thin-film Li batteries and commercial AC//AC supercapacitors.

One-step Synthesis of Architectural Ni3S2 Nanosheet-on-nanorods Array for Use As High-Performance Electrodes for Supercapacitors

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Construction of Hierarchical 2D PANI/Ni3S2 Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

Construction of Hierarchical 2D PANI/Ni<sub>3</sub>S<sub>2</sub> Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

A Metal-Organic Framework Derived Hierarchical Nickel-Cobalt Sulfide Nanosheet Array on Ni Foam with Enhanced Electrochemical Performance for Supercapacitors

One-step colloid fabrication of nickel phosphides nanoplate/nickel foam hybrid electrode for high-performance asymmetric supercapacitors

Synthesis of NiMn-LDH Nanosheet@Ni 3 S 2 Nanorod Hybrid Structures for Supercapacitor Electrode Materials with Ultrahigh Specific Capacitance

Hierarchical Structure Electrodes of NiO Ultrathin Nanosheets Anchored to NiCo2O4 on Carbon Cloth with Excellent Cycle Stability for Asymmetric Supercapacitors

Ni-Co Selenide Nanosheet/3D Graphene/Nickel Foam Binder-Free Electrode for High-Performance Supercapacitor

In Situ Growth of Nico2s4 Nanotube Arrays on Ni Foam for Supercapacitors: Maximizing Utilization Efficiency at High Mass Loading to Achieve Ultrahigh Areal Pseudocapacitance

A Few Atoms Thick Nickel–Cobalt Oxides Mesoporous Nanosheets and Their Arrays on Ni Foam for Supercapacitors with Ultra-Long Cycling Lifespan

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

Rational Construction of Nickel Cobalt Sulfide Nanoflakes on CoO Nanosheets with the Help of Carbon Layer As the Battery-Like Electrode for Supercapacitors

One-step Electrodeposited Nickel Cobalt Sulfide Nanosheet Arrays for High-Performance Asymmetric Supercapacitors.

Rational Construction of Core-Shell Ni3S2@Ni(OH)(2) Nanostructures As Battery-Like Electrodes for Supercapacitors

Three-Dimensional Porous Network Electrodes with Cu(OH)<sub>2</sub> Nanosheet/Ni<sub>3</sub>S<sub>2</sub> Nanowire 2D/1D Heterostructures for Remarkably Cycle-Stable Supercapacitors

Three-Dimensional Porous Network Electrodes with Cu(OH) 2 Nanosheet/Ni 3 S 2 Nanowire 2D/1D Heterostructures for Remarkably Cycle-Stable Supercapacitors

Design and fabrication of free-standing Ni3S2/NiV-LDH nanosheets arrays on reduced graphene oxide/Ni foam as a novel electrode for asymmetric supercapacitor

Single-crystal beta-NiS nanorod arrays with a hollow-structured Ni3S2 framework for supercapacitor applications

Ultrathin and Porous Ni3S2/CoNi2S4 3d‐network Structure for Superhigh Energy Density Asymmetric Supercapacitors

In Situ Preparation of Three-Dimensional Porous Nickel Sulfide as a Battery-Type Supercapacitor