Abstract:Graphene is a useful saturable absorber in a variety of lasers working in mode-locking or Q-switch regimes. The optical performance of chemically synthesized graphene is still not completely characterized. In this study, the saturable absorption and the nonlinear refractive index of graphene flakes in N-methylpyrrolidone, in both liquid and solid phases, have been studied at 800 nm with the z-scan technique using femtosecond laser pulses. The results obtained using a Ti:sapphire laser oscillator in the mode-locking regime (6 fs, 78 MHz) or in the continuous wave shows that the optical properties of graphene have a thermal origin, while at the lower repetition rate and higher energy and intensity of a Ti:sapphire amplifier (95 fs, 1 kHz), it shows the electronic Kerr effect. Solid samples with very high optical densities, equivalent to 60 layers of graphene grown by chemical vapor deposition (CVD), can be fabricated. They show a higher saturation intensity ( I s ≈ 100 GW cm–2) than CVD-grown (74 MW cm–2) or epitaxially grown (4 GW cm–2) graphene and intensity-dependent changes in transmission from 25% to 43%. This change in transmission in multilayer solid samples points to a good performance as a saturable absorber in laser cavities.Graphene is a useful saturable absorber in a variety of lasers working in mode-locking or Q-switch regimes. The optical performance of chemically synthesized graphene is still not completely characterized. In this study, the saturable absorption and the nonlinear refractive index of graphene flakes in N-methylpyrrolidone, in both liquid and solid phases, have been studied at 800 nm with the z-scan technique using femtosecond laser pulses. The results obtained using a Ti:sapphire laser oscillator in the mode-locking regime (6 fs, 78 MHz) or in the continuous wave shows that the optical properties of graphene have a thermal origin, while at the lower repetition rate and higher energy and intensity of a Ti:sapphire amplifier (95 fs, 1 kHz), it shows the electronic Kerr effect. Solid samples with very high optical densities, equivalent to 60 layers of graphene grown by chemical vapor deposition (CVD), can be fabricated. They show a higher saturation intensity ( I s ≈ 100 GW cm–2) than CVD-grown (74 MW cm–2...

Graphene Mode-Locked Femtosecond Cr2+:ZnS Laser with ~300 Nm Tuning Range.

Graphene-clad Microfibre Saturable Absorber for Ultrafast Fibre Lasers.

Graphene Mode-Locked Fiber Laser at 2.8 $\mu \Text{m}$

A Stable, Wideband Tunable, Near Transform-Limited, Graphene-Mode-locked, Ultrafast Laser

Graphene mode locked, wavelength-tunable, dissipative soliton fiber laser

Atomic layer graphene as saturable absorber for ultrafast pulsed lasers

Graphene mode-locked ultrafast laser.

Monolayer Graphene as Saturable Absorber in Mode-locked Laser

Graphene Q-Switched, Tunable Fiber Laser

Femtosecond ytterbium-doped fiber laser mode-locked by carboxyl-functionalized graphene oxide saturable absorber

Thulium-doped all-fiber laser mode-locked by CVD-graphene/PMMA saturable absorber

Frequency-Modulation Mode-Locked Laser with GHz Spectral Width Tunable in the 2-3 um Region

Low-loss flake-graphene saturable absorber mirror for laser mode-locking at sub-200-fs pulse duration

Wavelength-Tunable Kerr-Lens Mode-Locked Femtosecond Cr:ZnS Laser With a ∼300-nm Tuning Range From 2.2 to 2.5 μm

Broadband Graphene Saturable Absorber for Pulsed Fiber Lasers at 1, 1.5, and 2 Μm

Non-planar graphene directly synthesized on intracavity optical microresonators for GHz repetition rate mode-locked lasers

Large energy soliton erbium-doped fiber laser with a graphene-polymer composite mode locker

Passively Q-switched 2 μm laser based on graphene/BN heterostructure as saturable absorber

Nonlinear thermal and electronic optical properties of graphene in N-methylpyrrolidone at 800 nm with femtosecond laser pulses

11-GHz waveguide Nd:YAG laser CW mode-locked with single-layer graphene

A photonic crystal-based broadband graphene saturable absorber