Abstract:Statement of problem: The in vivo release of Pd from palladium alloys into the oral environment and sensitivity reactions by patients has been of concern. However, little information is available about the variation in elemental release from different palladium alloys. Purpose: The purpose of this in vitro study was to compare the elemental release into a corrosion-testing medium from a high-palladium alloy (Freedom Plus, 78Pd-8Cu-5Ga-6In-2Au) and a Pd-Ag alloy (Super Star, 60Pd-28Ag-6In-5Sn) under different conditions. Material and methods: Alloys were cast into Ø12×1-mm-thick disks, subjected to simulated porcelain-firing heat treatment, polished, and ultrasonically cleaned in ethanol. Three specimens of each alloy were immersed for 700 hours in a solution for in vitro corrosion testing (ISO Standard 10271) that was maintained at 37 °C. Two solution volumes (125 mL and 250 mL) were used, and the solutions were subjected to either no agitation or agitation. Elemental compositions of the solutions were analyzed by using inductively coupled plasma-mass spectroscopy (ICP-MS). Concentrations of released elements from each alloy for the 2 solution volumes and agitation conditions were compared by using the restricted maximum likelihood estimation method with a 4-way repeated-measures ANOVA, the Satterwhite degrees of freedom method, a lognormal response distribution, and the covariance structure of compound symmetry. Results: For the 4 combinations of solution volume and agitation conditions, the mean amount of palladium released was 3 orders of magnitude less for the Pd-Ag alloy (0.009 to 0.017 μg/cm2 of alloy surface) compared with the Pd-Cu-Ga alloy (17.9 to 28.7 μg/cm2). Larger mean amounts of Sn, Ga, Ag, and In (0.29 to 0.39, 0.57 to 0.83, 0.71 to 1.08, and 0.91 to 1.25 μg/cm2, respectively) compared with Pd were released from the Pd-Ag alloy. Smaller amounts of Cu, Ga, and In (4.8 to 9.9, 5.9 to 12.8, and 4.2 to 9.5 μg/cm2, respectively) compared with Pd were released from the Pd-Cu-Ga alloy. The Ru released was much lower for the Pd-Ag alloy (0.002 μg/cm2) than the Pd-Cu-Ga alloy (0.032 to 0.053 μg/cm2). Statistically significant differences (P<.001) in elemental release were found for the factors of alloy and element and the alloy×element interaction. Significant differences were found for the solution volume (P=.022), solution volume×element interaction (P=.022), and alloy×solution volume×element interaction (P=.004). No significant effect was found for agitation condition. Conclusions: The relative amounts of released elements from each alloy were not proportional to the relative amounts in the composition. The amounts of Pd and Ga released from the Pd-Cu-Ga alloy were consistent with the breakdown of a Pd2Ga microstructural phase and perhaps some dissolution of the palladium solid solution matrix. Precipitates, rather than the palladium solid solution matrix, appeared to undergo greater dissolution in the Pd-Ag alloy. The Pd-Ag alloy should have lower risk of adverse biological reactions than the Pd-Cu-Ga alloy.

Less efficient skin penetration of the metal allergen Pd2+ compared to Ni2+ and Co2+ from patch test preparations

Patch-test reaction patterns in patients with a predisposition to atopic dermatitis

Patch test in contact dermatitis due to nickel exposure and its histopathological features

Prevalence of contact allergy to metals: nickel, palladium, and cobalt in Southern Sweden from 1995-2016

Metal allergy--a review on exposures, penetration, genetics, prevalence, and clinical implications

Metabolipidomic changes induced by dermal nickel penetration determined in an ex vivo porcine ear skin model

Analysis of Nickel Distribution by Synchrotron Radiation X-ray Fluorescence in Nickel-Induced Early- and Late-Phase Allergic Contact Dermatitis in Hartley Guinea Pigs

[Comparative Study of Sensitivity of Different Dental Metal Materials].

Acidic oral environment's potential contribution to palladium-induced systemic contact dermatitis: Case report

Nickel release from metal items in contact with skin: a comparison of methods and practical implications for regulation in Europe

ICP-MS measurements of elemental release from two palladium alloys into a corrosion testing medium for different solution volumes and agitation conditions

Twenty‐eight‐day follow‐up of patch test reactions to p‐phenylenediamine and p‐phenylenediamine dihydrochloride: A multicentre study on behalf of the European Environmental and Contact Dermatitis Research Group

Allergic Contact Dermatitis in Psoriasis Patients: Typical, Delayed, and Non-Interacting.

Patch test results to extracts of synthetic garments in textile dye positive patients

Patch Test Results of 500 Cases with Allergic Diseases in Shenzhen Area

A laboratory test based on determination of cytokine profiles: a promising assay to identify exposition to contact allergens and predict the clinical outcome in occupational allergic contact dermatitis

Evaluation of selected biomarkers for the detection of chemical sensitization in human skin: a comparative study applying THP-1, MUTZ-3 and primary dendritic cells in culture

Regulation of immune response genes in the skin of allergic and clinically tolerant individuals exposed to p-phenylenediamine

Effect of a chemical mixture on dermal penetration of arsenic and nickel in male pig in vitro

Delayed type hypersensitivity reactions to various allergens may differently model inflammatory skin diseases

Patch Testing With Cobalt in Adults: A North American Contact Dermatitis Group Experience, 2001-2018