Abstract:The article presents the results of friction and vibroacoustic tests of a railway disc brake carried out on a brake stand. The vibration signal generated by the friction linings provides information on their wear and offers evaluation of the braking process, i.e., changes in the average friction coefficient. The algorithm presents simple regression linear and non-linear models for the thickness of the friction linings and the average coefficient of friction based on the effective value of vibration acceleration. The vibration acceleration signals were analyzed in the amplitude and frequency domains. In both cases, satisfactory values of the dynamics of changes above 6 dB were obtained. In the case of spectral analysis using a mid-band filter, more accurate models of the friction lining thickness and the average coefficient of friction were obtained. However, the spectral analysis does not allow the estimation of the lining thickness and the friction coefficient at low braking speeds, i.e., 50 and 80 km/h. The analysis of amplitudes leads to the determination of models in the entire braking speed range from 50 to 200 km/h, despite the lower accuracy compared to the model, based on the spectral analysis. The vibroacoustic literature presents methods of diagnosis of the wear of various machine elements such as bearings or friction linings, based on amplitude or frequency analysis of vibrations. These signal analysis methods have their limitations with regard to their scope of use and the accuracy of diagnosis. There are no cases of simultaneous use of different methods of analysis. This article presents the simultaneous application of the amplitude and frequency methods in the analysis of vibroacoustic signals generated by brake linings. Moreover, algorithms for assessing the wear of friction linings and the average coefficient of friction were presented. The algorithm enables determination of the time at which the friction linings should be replaced with new ones. The final algorithm analyzes the vibration acceleration signals using both amplitude analysis for low braking speeds, as well as spectral analysis for medium and high braking speeds.

Innovative solution for test equipment for the experimental investigation of friction properties of brake components of brake systems

Rail Vehicles Brake Components Test Bench Utilisation

Development on Friction Measurement System for Pneumatic Cylinders

On scaled-down bench testing to accelerate the development of novel friction brake materials

Investigation and Modelling of the Weight Wear of Friction Pads of a Railway Disc Brake

Construction of a test bench for bicycle rim and disc brakes

Design and Development of a Brake Test Bench for Formula SAE Race Cars

A Quasi-Actual Mechatronic Instrument for Realistically Testing Roller-Piston Friction Pairs

Modeling, Control And Test Of A Novel Electronic Pneumatic Brake System

Evaluation of Wear of Disc Brake Friction Linings and the Variability of the Friction Coefficient on the Basis of Vibroacoustic Signals

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

Numerical modeling of heat generation process in a disk brake at three thermal contact conditions over an extended braking distance

Comparison of Chase and inertial brake Dynamometer testing of automotive friction materials

Investigation of the heat distribution in dry friction systems during fade and recovery using fiber-optic sensing and infrared technology

fBrake, a Method to Simulate the Brake Efficiency of Laden Light Passenger Vehicles in PTIs While Measuring the Braking Forces of Their Unladen Configurations

Modification of friction block connection for improving the tribological behavior of high-speed train braking interface

Study on the Strength of the Brake Pad of a Freight Wagon under Uneven Loading in Operation

The Effect of a Variable Disc Pad Friction Coefficient for the Mechanical Brake System of a Railway Vehicle

Impact of Operating Time on Selected Tribological Properties of the Friction Material in the Brake Pads of Passenger Cars

Investigation of functional characteristics of composites used for brake pads

Testing Passenger Car Brake Pad Exploitation Time’s Impact on the Values of the Coefficient of Friction and Abrasive Wear Rate Using a Pin-on-Disc Method