Abstract:Here, the authors introduce twin‐wire sensor networks for enabling high‐density 4‐wire sensing systems which are more efficient in terms of wires, pads, and interconnections. After systematically discussing the design of the sensor network and its electronic interface, a twin‐wire 29‐temperature‐sensors network with only 32 pads is shown. These strategies can be especially important for robotics and wearable or epidermal devices. A fundamental limit to high‐density sensing is that adding sensors increases the number of wires, pads, and interconnections. This problem is even worse for low‐values resistive or impedance sensors which, for high accuracy, require 4‐wire measurements. Here, twin‐wire sensor networks are described which enable 4‐wire measurements with significantly fewer wires, pads, and interconnections. The effects of the resistor noise can be minimized by minimum‐resistance sensing paths. A single chopper switch and straightforward digital operations can reject the equivalent input offset and low‐frequency noise voltages of the instrumentation amplifier, thus requiring no hardware changes. The inclusion in the network of a reference resistor can compensate the errors of both the biasing current and the instrumentation amplifier voltage gain. For validation, an extremely compact, robust, and easy‐to‐connect flexible‐PCB twin‐wire 29‐temperature‐sensors network requiring only 32 pads is demonstrated. This device is placed on an anthropomorphic head phantom for detecting the temperature and location of a touching object or on the hand of a volunteer for monitoring skin temperature during mental and physical stimulations. A twin‐wire 29‐photoresistors network is also presented. The strategies reported here can be applied to any high‐density array of resistive or impedance sensors (temperature, strain, blood flow, light, etc.) and may find wide application in robotics and wearable or epidermal devices.

A Novel Two-Wire Fast Readout Approach for Suppressing Cable Crosstalk in a Tactile Resistive Sensor Array

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

Twin‐Wire Sensor Networks

A Novel Electrical Resistance Tomography System Based on ${\rm{c}}^{4}{\rm D}$ Technique

High Accuracy Approach for Crosstalk Effects Compensation on 2-D Resistive Sensor Array Readouts

PDMS/MWCNT-based Tactile Sensor Array with Coplanar Electrodes for Crosstalk Suppression

Noninvasive Current Sensor for Multicore Cables

A Micro-wires Based Tactile Sensor for Prosthesis.

Skin‐Inspired Piezoelectric Tactile Sensor Array with Crosstalk‐Free Row+Column Electrodes for Spatiotemporally Distinguishing Diverse Stimuli

Ultrafast Readout, Crosstalk Suppression Iontronic Array Enabled by Frequency-Coding Architecture

A Novel Inverse Solution Of Contact Force Based On A Sparse Tactile Sensor Array

Design Of A Finger-Tip Flexible Tactile Sensor For Dexterous Robot Hand And The Crosstalk Effect Analysis

A Flexible Tactile Sensor Array Based On Pressure Conductive Rubber For Three-Axis Force And Slip Detection

Contactless Current Measurement for Enclosed Multiconductor Systems Based on Sensor Array.

A Flexible Capacitive Tactile Sensor Array with High Scanning Speed for Distributed Contact Force Measurements

Crosstalk-Free, Stretching-Insensitive Sensor Based on Arch-Bridge Architecture for Tactile Mapping with Parallel Addressing Strategy toward Million-Scale-Pixels Processing

Structure Analysis and Decoupling Research of a Novel Flexible Tactile Sensor Array

Linear Readout Circuit for Simultaneously Accessing Two Elements in the Two-Dimensional Resistive Sensor Array

Develop And Implement A Novel Tactile Sensor Array With Stretchable And Flexible Grid-Like Spring

All-printed Flexible Capacitive Array Tactile Force Sensors with Tunable Sensitivity and Low Crosstalk for Micro Motion Detection

Fully Printed Flexible Capacitive Array Tactile Force Sensors with Tunable Sensitivity and Low Crosstalk for Monitoring Human Motion and Sound Signals