Abstract:Abstract Contour error compensation is an active research topic in five-axis CNC machining, especially in the manufacturing of sculptured surface parts. Nevertheless, current methods are mainly based on the mirror compensation principle, and fail to obtain a desired level of accuracy when processing parts with tight curvature feature. To address this issue, a global toolpath modulation-based contour error pre-compensation method is developed in this paper, which incorporates the error compensation issue into the stage of toolpath planning with a linear analytical solution. In this method, the nominal toolpaths used to machine the products is first expressed by dual B-spline curves, and then the instantaneous tracking error model of each individual drive is built with respect to control points of splined path. Afterward, the satisfaction condition of the spline control points for eliminating the contour error is yielded, which provides a possibility for compensating contour error in a global manner, and the neighbor-dependent coupling issue in error compensation between adjacent cutter location points is capable of being handled as well. On this basis, by applying the least-squares technique, the complicated contour error pre-compensation problem is further converted into a solution of simpler linear equation system. For enhancing its robustness when processing long toolpaths, an adaptive piecewise modulation strategy is also developed. Finally, both experiment and simulation are conducted to validate the proposed method, and the results demonstrate that the proposed method can significantly improve contour precision at low computational costs when compared with the existing pre-compensation method.

A Method of Quality Control for Globoidal Cam Machining Based on Multi-Variable Mirror Compensation

Error Analysis and Compensation Method for Motion Errors of NC Machine Tools under Cutting Loads

Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface

An Error Compensation Method for Multi-Axis Machining Based on the Actual Contour Measurement

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Machining Error Online Monitoring and Compensation of Numerical Control Forming Gear Grinding Machine

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Global toolpath modulation–based contour error pre-compensation for multi-axis CNC machining

Investigation of sensitivity analysis and compensation parameter optimization of geometric error for five-axis machine tool

CNC machine tool work offset error compensation method

Geometric Error Modeling and Compensation for Large-Scale Grinding Machine Tools with Multi-Axes

Study on Theoretical Manufacturing Error Caused by Off-s Et Compensation in NC Machining for Spatial Cam

Research on geometric error compensation of ultra-precision turning-milling machine tool based on macro–micro composite technology

A New Approach to Improving the Machining Precision Based on Dynamic Sensitivity Analysis

Contour Error Compensation Strategy for Multi-Axis Machining by Trajectory Error Modeling

Global Quantitative Sensitivity Analysis and Compensation of Geometric Errors of CNC Machine Tool

Machining error compensation of free-form surfaces by combination of ordinary kriging method and mirror compensation method

Incorporating Local Offset in the Global Offset Method and Optimization Process for Error Compensation in Machine Tools

An innovative geometric error compensation of the multi-axis CNC machine tools with non-rotary cutters to the accurate worm grinding of spur face gears

Research About the Method of Sensitivity Analysis and Quality Control Based on LS-SVM

A methodology for systematic geometric error compensation in five-axis machine tools