Abstract:Considering the factor of traffic noise during design period could mitigate the noise emission of urban road networks. In this paper, noise prediction and control of typical points among design networks are presented, with the establishment of a univariate noise prediction model and the improvement of UE (user equilibrium) traffic assignment model. First, a univariate traffic noise prediction model is built with flow as variate merely, which is based on the line source model and introduce of the Van Aeder model. Furthermore, the accuracy of the prediction model is verified in comparison with measured traffic noise data. Secondly, the univariate traffic noise prediction model and travel time model are combined to form the impedance function with different traffic noise weight coefficients after normalization, and upon which the UE model is rebuilt with the road level of service as a constraint. Finally, the improved UE model is used to study the noise control law of the control points, which are divided in two types according to the location. The results show that the improved UE model can effectively reduce the traffic noise of control points by adjusting the traffic noise weight, and among them, the traffic noise of the control point beside the single road and the control point at the road crossing are reduced by at most 0.54 dB, 1.1 dB respectively. Meanwhile, the noise control of points in road network will cause uncertainty to the overall traffic noise emission of the road network, which confirms the noise paradox. Besides, while the traffic noise of the road where the control point is located is reduced, the noise emission and the travel delay of roads in parallel with objective road increases by 0.19 dB, 0.932 s at most. The correlation coefficient between the traffic noise difference of the control point and the VC ratio difference of the road beside the control point is as high as 0.9811 under the improved UE model with different traffic noise, and there is a linear relationship between them. The study can provide a reference for traffic noise control during urban road network design. (C) 2020 Elsevier Ltd. All rights reserved.

Evaluate traffic noise level based on traffic microsimulation combined with a refined classic noise prediction method

Assessment of Traffic Noise Level Before and after Freeway Widening Using Traffic Microsimulation and a Refined Classic Noise Prediction Method

Traffic Noise Prediction Method Based on FHWA M Odel and T Raffic Flow Simulation

A Model for Highway Traffic Noise Prediction Based on the Concept of Equivalent Traffic Flow

Influence of traffic regulation factors on noise in ordinary urban roads

A Microscopic Prediction Model for Traffic Noise in Adjacent Regions to Arterial Roads

A digital simulation method of urban road traffic noise

Evaluation and prediction new methods of road traffic noise

Dynamic Simulation and Analysis of Traffic Noise at Roundabout

Understanding and Planning Shared Micro-Mobility

Dynamic Simulation of Traffic Noise for Elevated Road

Prediction and Analysis of Noise Impact and Noise Reduction Scheme Effect for Complex Road Types

Prediction model for road traffic noise

Development of a road shoulder's equivalent sound source traffic noise prediction model

Dynamic Modeling and Feature Analysis of Traffic Noise in Elevated Road

A study on vehicle noise prediction model at lower speed

A Prediction Method for City Traffic Noise Based on Traffic Simulation under a Mixed Distribution Probability

Forecast and Control of Traffic Noise Based on Improved UE Model During Road Network Design

Traffic Noise Distribution Simulation of Nanjing Olympic Sports Center around and Evaluation of Noise Control

Estimating traffic noise over a large urban area: An evaluation of methods

Dynamic Simulation of Traffic Noise Based on Microscopic Traffic Simulation on Elevated Sloping Road